固体填充床储热性能实验与模拟研究

刘琰; 章颢缤; 叶成梁; 俞明锋; 张磊; 温航宇

doi:doi:10.19912/j.0254-0096.tynxb.2025-0258

欢迎来到能源电力期刊网！

English Version 读者登录期刊登录

您当前的位置：

首页 >

文章列表页 >

固体填充床储热性能实验与模拟研究

更新时间：2025-12-10

- 固体填充床储热性能实验与模拟研究
- 固体填充床储热性能实验与模拟研究
- 太阳能学报 2025年第11期页码：136-143
- 作者机构：
- 作者简介：
- 基金信息：
- DOI：doi:10.19912/j.0254-0096.tynxb.2025-0258
  中图分类号： K513
- 网络出版：2025-12-04，
  
  纸质出版：2025-12-04
- 稿件说明：
移动端阅览
刘琰, 章颢缤, 叶成梁, 等. 固体填充床储热性能实验与模拟研究[J]. 太阳能学报, 2025,(11):136-143.

刘琰, 章颢缤, 叶成梁, et al. 固体填充床储热性能实验与模拟研究[J]. 2025, (11): 136-143.
刘琰, 章颢缤, 叶成梁, 等. 固体填充床储热性能实验与模拟研究[J]. 太阳能学报, 2025,(11):136-143. DOI： doi:10.19912/j.0254-0096.tynxb.2025-0258.

刘琰, 章颢缤, 叶成梁, et al. 固体填充床储热性能实验与模拟研究[J]. 2025, (11): 136-143. DOI： doi:10.19912/j.0254-0096.tynxb.2025-0258.

摘要

为研究卧式固体颗粒填充床系统的储热性能

搭建以空气作为传热介质的实验装置

对储/放热过程的热力学特性和压降变化进行了实验与数值模拟研究。结果表明

填充床储放热效率达到95.5%

热空气入流速度从0.40 m/s增至1.96 m/s时

储罐有效利用率提高15个百分点

储热时间缩短70%。运行过程中

填充床顶部出现沉降现象

导致后段填充床提前加热

整体储热量降低。通过在床层顶部设置合理插入深度的挡板

可有效缓解空气旁路问题。当储热滞后系数k=1时

空气层与填充床温度场推移速度一致

此时挡板插入深度最优。

Abstract

To investigate the thermal storage performance of horizontal packed-bed systems filled with solid particles

an experimental setup was established using air as the heat transfer medium. Experimental and numerical studies were conducted to analyze the thermodynamic characteristics and pressure drop variations during the charging and discharging processes. Results showed that the round-trip efficiency of the packed bed reached 95.5%. When the inlet airflow velocity increased from 0.40 m/s to 1.96 m/s

the effective utilization rate improved by 15 percentage points

and the storage duration decreased by 70%. During operation

a top-layer settling phenomenon occurred in the packed bed

leading to premature heating of the downstream section and a reduction in overall thermal storage capacity. By installing baffles with an optimal insertion depth at the top of the bed

the impact of air bypass could be effectively mitigated. When the thermal storage lag coefficient

the propagation speed of the temperature field in the air layer matched that in the packed bed

achieving the optimal baffle insertion depth.

关键词

Keywords

references

黄震, 谢晓敏. 碳中和愿景下的能源变革[J]. 中国科学院院刊, 2021, 36(9): 1010-1018.

崔杨, 张家瑞, 仲悟之, 等. 计及电热转换的含储热光热电站与风电系统优化调度[J]. 中国电机工程学报, 2020, 40(20): 6482-6494.

CARRILLO A J, GONZÁLEZ-AGUILAR J, ROMERO M, et al. Solar energy on demand: a review on high temperature thermochemical heat storage systems and materials[J]. Chemical reviews, 2019, 119(7): 4777-4816.

王晋达, 孔凡思, 靳宇飞, 等. 集中供热系统中可再生能源站的布局同步优化模型研究与应用[J]. 太阳能学报, 2024, 45(10): 266-275.

MEIER A, WINKLER C, WUILLEMIN D.Experiment for modelling high temperature rock bed storage[J]. Solar energy materials, 1991, 24(1/2/3/4): 255-264.

AL-AZAWII M M S, ALHAMDI S F H, BRAUN S, et al. Thermocline in packed bed thermal energy storage during charge-discharge cycle using recycled ceramic materials - Commercial scale designs at high temperature[J]. Journal of energy storage, 2023, 64: 107209.

HÄNCHEN M, BRÜCKNER S, STEINFELD A. High-temperature thermal storage using a packed bed of rocks-Heat transfer analysis and experimental validation[J]. Applied thermal engineering, 2011, 31(10): 1798-1806.

孙潇, 罗志斌, 蔡春荣, 等. 不同长径比填充床蓄冷器储释冷特性研究[J]. 太阳能学报, 2024, 45(10): 745-751.

MCTIGUE J D, MARKIDES C N, WHITE A J.Performance response of packed-bed thermal storage to cycle duration perturbations[J]. Journal of energy storage, 2018, 19: 379-392.

金翼, 王乐, 杨岑玉, 等. 堆积床储冷系统循环性能分析[J]. 储能科学与技术, 2017, 6(4): 708-718.

王政伟, 吕长宁, 钱莉, 等. 固体蓄热器填充床容积蓄热率的分析与研究[J]. 太阳能学报, 2019, 40(12): 3389-3394.

KOTHARI R, HEMMINGSEN C S, VOIGT N V, et al.Numerical and experimental analysis of instability in high temperature packed-bed rock thermal energy storage systems[J]. Applied energy, 2024, 358: 122535.

EGGERS J R, VON DER HEYDE M, THAELE S H, et al. Design and performance of a long duration electric thermal energy storage demonstration plant at megawatt-scale[J]. Journal of energy storage, 2022, 55: 105780.

来振亚. 颗粒堆积床烧结及储能特性研究[D]. 杭州: 浙江大学, 2022.

ERGUN S.Fluid flow through packed columns[J]. Chemical engineering progress, 1952, 48(2): 89.

RAICHURA R C.Pressure drop and heat transfer in packed beds with small tube-to-particle diameter ratio[J]. Experimental heat transfer, 1999, 12(4): 309-327.

FOUMENY E A, BENYAHIA F, CASTRO J A A, et al. Correlations of pressure drop in packed beds taking into account the effect of confining wall[J]. International journal of heat and mass transfer, 1993, 36(2): 536-540.

赵岩, 王亮, 陈海生, 等. 填充床显热及相变储热特性分析[J]. 工程热物理学报, 2012, 33(12): 2052-2057.

BRINKMAN H C.The viscosity of concentrated suspensions and solutions[J]. The journal of chemical physics, 1952, 20(4): 571.

WU C C, HWANG G J.Flow and heat transfer characteristics inside packed and fluidized beds[J]. Journal of heat transfer, 1998, 120(3): 667-673.

CHANDRASEKHARA B C, VORTMEYER D.Flow model for velocity distribution in fixed porous beds under isothermal conditions[J]. Wärme - und stoffübertragung, 1979, 12(2): 105-111.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

动态分层取热对大规模蓄热水池内部热分层影响的缩尺模型实验研究

多元纳米颗粒增强石蜡相变储热材料的热物理性能实验研究

太阳能供暖静置期埋地储热水体散热特性分析

分层取热对大规模蓄热水池热分层影响的实验研究