网络首发:2026-03-05,
纸质出版:2026-03-05
移动端阅览
陈信堂, 周恒, 魏建鹏, 等. 装配式光伏支架刚架结构承载性能试验研究[J]. 太阳能学报, 2026,47(2):100-110.
陈信堂, 周恒, 魏建鹏, et al. 装配式光伏支架刚架结构承载性能试验研究[J]. 2026, 47(2): 100-110.
陈信堂, 周恒, 魏建鹏, 等. 装配式光伏支架刚架结构承载性能试验研究[J]. 太阳能学报, 2026,47(2):100-110. DOI: doi:10.19912/j.0254-0096.tynxb.2024-1804.
陈信堂, 周恒, 魏建鹏, et al. 装配式光伏支架刚架结构承载性能试验研究[J]. 2026, 47(2): 100-110. DOI: doi:10.19912/j.0254-0096.tynxb.2024-1804.
为研究装配式光伏支架结构在风荷载作用下的承载性能
以某光伏支架优化项目为基础
制作足尺光伏支架结构
进行静力加载试验研究
结合数值模拟
分析其力学性能。此外
研究了该支架结构在负风压工况下的受力性能。研究表明:结构在设计荷载下各构件未超过材料屈服应力
且挠度符合规范要求。有限元模拟与试验结果吻合较好
验证了有限元模拟方法的正确性。分析发现支架结构在140%设计荷载下有足够的承载力
结构破坏模式为钢梁局部失稳。
Based on a photovoltaic bracket optimization project
a full-scale photovoltaic bracket structure is fabricated in order to study its bearing capacity under wind load. A static loading test
along with numerical simulations
is performed to evaluate the mechanical properties of the structure. Furthermore
the force response of the structure under negative wind pressure conditions is examined. The results indicate that the structural members remain within the material yield stress limits
and their deflections satisfy the code requirements. The finite element simulation closely matches the experimental results
validating the accuracy of the simulation method. In conclusion
the photovoltaic bracket structure exhibits adequate bearing capacity under 140% of the design load
with local instability of the steel beam identified as the primary mode of structural failure.
沈国辉, 余杭聪, 李懿鹏, 等. 不同长宽比高层建筑沿高度分布的风荷载[J]. 土木工程学报, 2022, 55(11): 26-37.
THORDAL M S, BENNETSEN J C, KOSS H H H. Review for practical application of CFD for the determination of wind load on high-rise buildings[J]. Journal of wind engineering and industrial aerodynamics, 2019, 186: 155-168.
王彩玉, 马文勇, 韩晓乐, 等. 女儿墙对平屋面阵列光伏板风荷载的影响[J]. 工程力学, 2021, 38(S1): 216-222.
ABIOLA-OGEDENGBE A, HANGAN H, SIDDIQUI K.Experimental investigation of wind effects on a standalone photovoltaic (PV) module[J]. Renewable energy, 2015, 78: 657-665.
许宁, 李旭辉, 高晨崇, 等. 光伏系统风荷载体型系数分析[J]. 太阳能学报, 2021, 42(10): 17-22.
李寿英, 马杰, 刘佳琪, 等. 柔性光伏系统颤振性能的节段模型试验研究[J]. 土木工程学报, 2024, 57(2): 25-34.
陈权, 牛华伟, 李红星, 等. 基于气弹模型风洞试验的柔性光伏支架气动稳定性及干扰效应研究[J]. 建筑结构学报, 2023, 44(11): 153-161.
杜航, 徐海巍, 张跃龙, 等. 大跨柔性光伏支架结构风压特性及风振响应[J]. 哈尔滨工业大学学报, 2022, 54(10): 67-74.
全勇, 吴建高, 陈艳, 等. 风向角和倾角对光伏阵列风荷载的影响[J]. 太阳能学报, 2024, 45(1): 25-31.
HE X H, DING H, JING H Q, et al.Wind-induced vibration and its suppression of photovoltaic modules supported by suspension cables[J]. Journal of wind engineering and industrial aerodynamics, 2020, 206: 104275.
KIM Y C, SHAN W, YANG Q S, et al.Effect of panel shapes on wind-induced vibrations of solar wing system under various wind environments[J]. Journal of structural engineering, 2020, 146(6): 04020104.
STROBEL K, BANKS D.Effects of vortex shedding in arrays of long inclined flat plates and ramifications for ground-mounted photovoltaic arrays[J]. Journal of wind engineering and industrial aerodynamics, 2014, 133: 146-149.
马文勇, 柴晓兵, 高飞, 等. 风荷载作用下柔性光伏支撑索轴力分析[J]. 振动、测试与诊断, 2023, 43(2): 271-276, 408.
马文勇, 柴晓兵, 刘庆宽, 等. 底部阻塞对太阳能光伏板风荷载的影响研究[J]. 建筑结构, 2019, 49(2): 129-134.
邹云峰, 李青婷, 殷梅子, 等. 跟踪式光伏结构风荷载规范规定值与风洞试验值对比[J]. 中南大学学报(自然科学版), 2022, 53(4): 1331-1340.
周锐, 王浩, 徐梓栋, 等. 强风多发区柔性光伏支架抗风可靠度评估[J]. 东南大学学报(自然科学版), 2024, 54(4): 845-851.
蔡元, 邓华, 李本悦. 悬索光伏支架结构抗风设计方法初探[J]. 振动与冲击, 2022, 41(21): 69-77.
黄万山, 卢红前, 彭秀芳, 等. 光伏支架结构优化设计研究[J]. 武汉大学学报(工学版), 2018, 51(S1): 72-76.
黄华, 张梅, 何银涛. 固定式光伏支架承载能力试验研究[J]. 太阳能学报, 2020, 41(4): 7-13.
黄华, 张梅, 何银涛. 基于SAP2000的光伏固定支架结构承载力分析[J]. 太阳能, 2015(6): 47-49, 61.
胡宝琳, 吴仁杰, 周磊, 等. 固定式光伏支架受力性能与试验研究[J]. 太阳能学报, 2022, 43(8): 116-121.
张亮, 朱紫玲, 罗冰冰, 等. 固定式光伏支架可承受荷载有限元分析[J]. 太阳能学报, 2022, 43(9): 15-20.
杨成, 陈建钧, 袁伟杰, 等. 复合材料光伏支架梁结构优化分析[J]. 太阳能学报, 2020, 41(3): 305-310.
NIE J, RUAN Q, CHEN G H.Research for the stability of PV trestle rooted in the land without groundsill in Hohhot[C]//2011 Second International Conference on Mechanic Automation and Control Engineering. Inner Mongolia, China, 2011: 7559-7563.
GB 50009—2012, 建筑结构荷载规范[S].
GB 50797—2012, 光伏发电站设计规范[S].
GB 50068—2018, 建筑结构可靠性设计统一标准[S].
GB/T 228.1—2010, 金属材料拉伸试验第1部分:室温试验方法[S].
JGJ/T 23—2011, 回弹法检测混凝土抗压强度技术规程[S].
0
浏览量
7
下载量
0
CSCD
关联资源
相关文章
相关作者
相关机构
京公网安备11010802024621