风电机组预制装配分片混凝土筒节的截面翘曲剪切系数计算

林长丰; 陈俊岭; 李金威; 赵学明; 冯又全

doi:doi:10.19912/j.0254-0096.tynxb.2024-1478

欢迎来到能源电力期刊网！

English Version 期刊登录

您当前的位置：

首页 >

文章列表页 >

风电机组预制装配分片混凝土筒节的截面翘曲剪切系数计算

更新时间：2026-03-06

- 风电机组预制装配分片混凝土筒节的截面翘曲剪切系数计算
- 风电机组预制装配分片混凝土筒节的截面翘曲剪切系数计算
- 太阳能学报 2026年47卷第2期页码：428-434
- 作者机构：
- 作者简介：
- 基金信息：
- DOI：doi:10.19912/j.0254-0096.tynxb.2024-1478
  中图分类号： TU323
- 网络首发：2026-03-05，
  
  纸质出版：2026-03-05
- 稿件说明：
移动端阅览
林长丰, 陈俊岭, 李金威, 等. 风电机组预制装配分片混凝土筒节的截面翘曲剪切系数计算[J]. 太阳能学报, 2026,47(2):428-434.

林长丰, 陈俊岭, 李金威, et al. 风电机组预制装配分片混凝土筒节的截面翘曲剪切系数计算[J]. 2026, 47(2): 428-434.
林长丰, 陈俊岭, 李金威, 等. 风电机组预制装配分片混凝土筒节的截面翘曲剪切系数计算[J]. 太阳能学报, 2026,47(2):428-434. DOI： doi:10.19912/j.0254-0096.tynxb.2024-1478.

林长丰, 陈俊岭, 李金威, et al. 风电机组预制装配分片混凝土筒节的截面翘曲剪切系数计算[J]. 2026, 47(2): 428-434. DOI： doi:10.19912/j.0254-0096.tynxb.2024-1478.

摘要

为考虑风电机组预制装配式混凝土塔筒环向分片后剪切效应的影响

推导了任意几何尺寸管片的截面翘曲剪切系数计算公式

并建立2~6分片混凝土筒节的有限元模型

对比数值分析、规范方法、考虑翘曲剪切及传统Vlasov理论的扭转角计算值

结果表明：翘曲剪切系数与分片圆心角负相关

与壁厚和半径之比正相关;分片数量少、厚径比小的筒节剪切效应更加显著。规范方法和传统Vlasov理论方法会较大程度低估构件的扭转变形

特定情况下仅为有限元结果的52%和21%;该文所提考虑翘曲剪切的方法不仅偏于安全

且整体上与数值分析结果更接近

特定情况下可比规范方法减小30％以上的偏差。

Abstract

In order to consider shear effect influence of the prefabricated concrete tower for segmented wind turbine

a formula for calculating the warping shear coefficient of one segment with arbitrary geometric dimensions is derived. The finite element models of concrete towers with 2-6 segments are established to compare the twist angles of numerical analyses

the code’s method

the warping shear formula

and the Vlasov theory

respectively. The results show that the warping shear coefficient is negatively related to the center angle of the segment and positively related to the ratio of thickness to radius. The shear effect of the tube with fewer segments or a smaller ratio of thickness to radius is more significant. The code’s method and the Vlasov theory will greatly underestimate the torsional deformation of the segment. In certain cases

it will be only 52% and 21% of the numerical results. The proposed method considering the warping shear coefficient is not only safer

but also generally consistent with the numerical results. The deviation can be reduced by more than 30% than the code’s method under specific cases.

关键词

Keywords

references

陈俊岭, 高洁, 赵邦州, 等. 风电机组钢塔架与钢-混凝土组合塔架动力响应对比分析[J]. 太阳能学报, 2023, 44(3): 225-231.

TIMOSHENKO S P.LXVI. On the correction for shear of the differential equation for transverse vibrations of prismatic bars[J]. The London, Edinburgh, and Dublin philosophical magazine and journal of science, 1921, 41(245): 744-746.

COWPER G R.The shear coefficient in Timoshenko’s beam theory[J]. Journal of applied mechanics, 1966, 33(2): 335.

蒋通, 宋亚新. 任意形状薄壁杆件截面剪应力不均匀系数μ的计算[J]. 建筑结构, 1999, 29(7): 53-54.

GRUTTMANN F, WAGNER W.Shear correction factors in Timoshenko’s beam theory for arbitrary shaped cross-sections[J]. Computational mechanics, 2001, 27(3): 199-207.

刘耀鹏, 邢佳乐, 白伦华, 等. 薄壁截面剪切系数计算的平面薄壁单元法[J]. 建筑钢结构进展, 2023, 25(10): 82-89.

VLASOV V Z.Thin-walled elastic beams[M]. Washington: National Science Foundation, 1961.

BACK S Y, WILL K M.A shear-flexible element with warping for thin-walled open beams[J]. International journal for numerical methods in engineering, 1998, 43(7): 1173-1191.

PAVAZZA R.Torsion of thin-walled beams of open cross-section with influence of shear[J]. International journal of mechanical sciences, 2005, 47(7): 1099-1122.

王兆强, 赵金城. 开口薄壁梁的扭转理论与应用[J]. 力学学报, 2011, 43(5): 963-967.

王晓峰, 杨庆山. 考虑横向和扭转剪切变形的空间薄壁梁单元[J]. 力学学报, 2013, 45(2): 293-296.

刘建, 陈勇, 曹洲, 等. 基于一阶薄壁梁理论的开口截面剪应力不均匀系数的精确计算[J]. 工业建筑, 2015, 45(10): 155-160.

KLEIN F, MARX S.Torsional load-bearing capacity of half-shell segments for prestressed concrete towers[J]. Engineering structures, 2021, 243: 112589.

KLEIN F, MARX S.Effects of warping shear deformation on the torsional load-bearing behaviour of assembled half-shell structures for wind energy towers[J]. Engineering structures, 2022, 269: 114728.

师振贵, 王云超, 黄赐荣, 等. 干式连接装配式风电混塔非线性特征研究[J]. 太阳能学报, 2024, 45(6): 564-571.

NB/T 10907—2021, 风电机组混凝土-钢混合塔筒设计规范[S].

GB 50010—2010, 混凝土结构设计规范(2015年版)[S].

BS5975—2019, Code of practice for temporary works procedures and the permissible stress design of falsework[S].

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

风电机组高柔塔二阶涡激振动特性研究

低风速型风电机组高柔塔筒涡激振动疲劳损伤评估

大型混塔式风电机组非线性动力响应分析

启动阶段风电齿轮箱行星轮径向-双向推力耦合滑动轴承瞬态润滑性能分析

基于改进MobileViT的风力机增速齿轮箱智能故障诊断方法