基于DIC的风电机组施必牢螺纹副承载分布试验及响因素分析

王立程; 刘玉; 姚玉东; 艾延廷

doi:doi:10.19912/j.0254-0096.tynxb.2024-0702

欢迎来到能源电力期刊网！

English Version 读者登录期刊登录

您当前的位置：

首页 >

文章列表页 >

基于DIC的风电机组施必牢螺纹副承载分布试验及响因素分析

更新时间：2025-10-22

- 基于DIC的风电机组施必牢螺纹副承载分布试验及响因素分析
- 暂无标题
- 太阳能学报 2025年46卷第9期页码：17-25
- 作者机构：
- 作者简介：
- 基金信息：
  
  国家自然科学基金（52205115）;辽宁省属本科高校基本科研业务费专项资金
- DOI：doi:10.19912/j.0254-0096.tynxb.2024-0702
  中图分类号： TH12
- 网络出版：2025-10-14，
  
  纸质出版：2025
- 稿件说明：
移动端阅览
王立程, 刘玉, 姚玉东, 等. 基于DIC的风电机组施必牢螺纹副承载分布试验及响因素分析[J]. 太阳能学报, 2025,46(9):17-25.
王立程, 刘玉, 姚玉东, 等. 基于DIC的风电机组施必牢螺纹副承载分布试验及响因素分析[J]. 太阳能学报, 2025,46(9):17-25. DOI： doi:10.19912/j.0254-0096.tynxb.2024-0702.

DOI：

摘要

基于数字图像相关法（DIC）提出施必牢螺纹副承载分布试验方法

并应用该方法研究标准螺纹副和施必牢螺纹副的载荷分布;依据施必牢螺纹副结构几何特征建立2D有限元模型

并与试验结果对比验证模型的准确性

分析螺纹楔形角、螺距和弹性模量对施必牢螺纹副的承载分布的影响规律。结果表明

DIC试验方法能够识别施必牢螺纹副载荷分布特征

从试验角度验证施必牢螺纹副的作用效果;标准螺纹副试验承载比例数值与解析方法最大误差仅为4.82%

施必牢螺纹副试验承载分布结果与有限元模型结果最大误差为5.23%;楔形角为30°时

承载最为均匀;轴向外载荷对承载比例影响较小;承载越均匀与螺距呈反比

与螺栓/螺母弹性模量比值呈正比。

Abstract

An experimental method based on digital image correlation （DIC） for load distribution of Spiralock thread pairs is proposed

and the method is applied to study the load distribution of standard threaded pairs and Spiralock thread pairs. A 2D finite element model is developed based on the geometrical characteristics of the Spiralock thread pair and the accuracy is validated by the experimental results. Finally

the influence of thread wedge angle

pitch and modulus of elasticity on the load distribution of the Spiralock thread pair is analyzed. The results show that the DIC experimental method can identify the load distribution characteristics of Spiralock thread pair and verify the effect of Spiralock thread pair from the experimental perspective. The maximum error between the standard threaded pair experimental load ratio values and the analytical method is only 4.82%. The maximum error between the results of the experiment load distribution of the Spiralock thread pair and the results of the finite element model is 5.23%. The most uniform loading is achieved with a wedge angle of 30°. The axis load has little effect on the load carrying ratio. Load uniformity is inversely proportional to the pitch and directly proportional to the elastic modulus ratio of the bolt to the nut.

关键词

Keywords

references

杜静, 唐与, 韩花丽, 等. 水平轴风力机主轴与轮毂联接螺栓数值分析研究[J]. 太阳能学报, 2016, 37(7): 1702-1710.

CHAABAN A, JUTRAS M.Static analysis of buttress threads using the finite element method[J]. Journal of pressure vessel technology, 1992, 114(2): 209-212.

KORIN I, PEREZ IPIÑA J. Experimental evaluation of fatigue life and fatigue crack growth in a tension bolt-nut threaded connection[J]. International journal of fatigue, 2011, 33(2): 166-175.

SOPWITH D G.The distribution of load in screw threads[J]. Proceedings of the institution of mechanical engineers, 1948, 159(1): 373-383.

YAMATOTO A.The theory and computation of threads connection[M]. Tokoy: Yokendo, 1980.

陈守俊, 高连新, 张毅, 等. 受拉螺纹联接的切齿力学分析及效果[J]. 华东理工大学学报(自然科学版), 2011, 37(3): 382-388.

张伟, 刘阳, 侯博文, 等. 螺距误差下的螺纹副应力分布及其对装配预紧力的影响研究[J]. 机械工程学报, 2021, 57(17): 132-148.

龙凯, 丁文杰, 陈卓, 等. 考虑螺栓疲劳损伤约束的法兰轻量化设计方法[J]. 太阳能学报, 2021, 42(9): 326-331.

陈岩, 芦旭, 江鹏, 等. 影响螺纹副轴向力分布均匀性的关键因素分析[J]. 东北大学学报(自然科学版), 2017, 38(8): 1142-1147.

BRETL J L, COOK R D.Modelling the load transfer in threaded connections by the finite element method[J]. International journal for numerical methods in engineering, 1979, 14(9): 1359-1377.

YANG G Q, HONG J, ZHU L B, et al.Three-dimensional finite element analysis of the mechanical properties of helical thread connection[J]. Chinese journal of mechanical engineering, 2013, 26(3): 564-572.

黄华, 王永和, 魏泰, 等. 摩擦和常温蠕变对风电螺栓预紧力松弛的敏感性分析[J]. 太阳能学报, 2023, 44(1): 289-296.

CHEN J J, SHIH Y S.A study of the helical effect on the thread connection by three dimensional finite element analysis[J]. Nuclear engineering and design, 1999, 191(2): 109-116.

LIAO R D.Nonlinear analysis of axial-load and stress distribution for threaded connection[J]. Chinese journal of mechanical engineering, 2009, 22(6): 869-875.

LIU X T, MI X, LIU J H, et al.Axial load distribution and self-loosening behavior of bolted joints subjected to torsional excitation[J]. Engineering failure analysis, 2021, 119: 104985.

马超, 林晨, 赵曾, 等. 施必牢螺纹在采样钻具防松连接中的应用研究[J]. 深空探测学报, 2016, 3(2): 175-180.

侯红玲, 陈鑫, 常向龙, 等. 冷挤压内螺纹力学性能试验研究[J]. 机械设计与制造, 2024(2): 105-110.

刘璐璐, 李志鹏, 韩佳奇, 等. 冲击载荷下单螺栓连接结构力学行为试验与仿真研究[J]. 推进技术, 2022, 43(2): 55-66.

HETÉNYI M. A photoelastic study of bolt and nut fastenings[J]. Journal of applied mechanics, 1943, 10(2): A93-A100.

陈海平, 曾攀, 方刚, 等. 螺纹副承载的分布规律[J]. 机械工程学报, 2010, 46(9): 171-178.

CHU T C, RANSON W F, SUTTON M A.Applications of digital-image-correlation techniques to experimental mechanics[J]. Experimental mechanics, 1985, 25(3): 232-244.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

基于训练干扰卷积神经网络的风轮不平衡识别方法研究

基于拓扑优化的风电机组前机舱底座轻量化设计