Dong He, Haohui Zhou, Zheng Lan, 等. Solid-State Circuit Breaker Based on Cascaded Normally-On SiC JFETs for Medium-Voltage DC Distribution Networks[J]. 现代电力系统保护与控制(英文), 2024,9(2).
Dong He, Haohui Zhou, Zheng Lan, et al. Solid-State Circuit Breaker Based on Cascaded Normally-On SiC JFETs for Medium-Voltage DC Distribution Networks[J]. Protection and Control of Modern Power Systems, 2024, 9(2).
Dong He, Haohui Zhou, Zheng Lan, 等. Solid-State Circuit Breaker Based on Cascaded Normally-On SiC JFETs for Medium-Voltage DC Distribution Networks[J]. 现代电力系统保护与控制(英文), 2024,9(2).DOI: 10.23919/PCMP.2023.000143.
Dong He, Haohui Zhou, Zheng Lan, et al. Solid-State Circuit Breaker Based on Cascaded Normally-On SiC JFETs for Medium-Voltage DC Distribution Networks[J]. Protection and Control of Modern Power Systems, 2024, 9(2).DOI: 10.23919/PCMP.2023.000143.
Solid-State Circuit Breaker Based on Cascaded Normally-On SiC JFETs for Medium-Voltage DC Distribution Networks
Solid-state circuit breakers (SSCBs) are critical components in the protection of medium-voltage DC distribution networks to facilitate arc-free
fast and reliable isolation of DC faults. However
limited by the capacity of a single semiconductor device
using semiconductor-based SSCBs at high voltage is challenging. This study presents the details of a 1.5 kV
63 A medium-voltage SSCB
composed primarily of a solid-state switch based on three cascaded normally-on silicon carbide (SiC) junction field-effect transistors (JFETs) and a low-cost programmable gate drive circuit. Dynamic and static voltage sharing among the cascaded SiC JFETs of the SSCB during fault isolation is realized using the proposed gate drive circuit. The selection conditions for the key parameters of the SSCB gate driver are also analyzed. Additionally
an improved pulse-width modulation current-limiting protection solution is proposed to identify the permanent overcurrent and transient inrush current associated with capacitive load startup in a DC distribution network. Using the developed SSCB prototype and the fault test system
experimental results are obtained to validate the fault response performance of the SSCB.
An Optimized Distribution Model for Energy System in Virtual Power Plants Integrating Electric Vehicles Based on TD3 and DQN
Energy Loss Optimization Method Considering the Time-varying Characteristics of Battery Energy Storage Systems
Reliability-Based Design Optimization for Lithium-ion Batteries Considering the Venting Critical Time
Real-Time Detection of Low-frequency Oscillations in Traction Power Supply Systems Based on Optimized Atomic Decomposition
Dual Alternative Iteration Algorithm-Based Hierarchical MPC Strategy for Frequency Regulation Control and Active Power Allocation of Wind-storage Coupling System