复合材料风电叶片参数化建模与结构特性分析

黄禹轩; 石可重; 项家豪; 张赫; 孙香宇; 李庆安

doi:10.19912/j.0254-0096.tynxb.2025-0733

欢迎来到能源电力期刊网！

English Version 期刊登录

您当前的位置：

首页 >

文章列表页 >

复合材料风电叶片参数化建模与结构特性分析

更新时间：2026-10-15

- 复合材料风电叶片参数化建模与结构特性分析
- 复合材料风电叶片参数化建模与结构特性分析
- 太阳能学报 2026年47卷第9期页码：781-787
- 作者机构：
- 作者简介：
- 基金信息：
- DOI：10.19912/j.0254-0096.tynxb.2025-0733
  中图分类号： TK83
- 网络首发：2026-10-10，
  
  纸质出版：2026
- 稿件说明：
移动端阅览
黄禹轩, 石可重, 项家豪, 等. 复合材料风电叶片参数化建模与结构特性分析[J]. 太阳能学报, 2026,47(9):781-787.

黄禹轩, 石可重, 项家豪, et al. 复合材料风电叶片参数化建模与结构特性分析[J]. 2026, 47(9): 781-787.
黄禹轩, 石可重, 项家豪, 等. 复合材料风电叶片参数化建模与结构特性分析[J]. 太阳能学报, 2026,47(9):781-787. DOI： 10.19912/j.0254-0096.tynxb.2025-0733.

黄禹轩, 石可重, 项家豪, et al. 复合材料风电叶片参数化建模与结构特性分析[J]. 2026, 47(9): 781-787. DOI： 10.19912/j.0254-0096.tynxb.2025-0733.

摘要

针对风电叶片结构优化设计中传统建模方法迭代效率低、依赖人工干预的问题

该文提出一种基于节点坐标驱动的风电叶片参数化建模方法

以IEA 15 MW风电叶片为研究对象

通过离散节点控制几何外形与网格单元分布

采用双重循环算法构建叶片展向和弦向的单元拓扑关系

集成材料铺层、载荷及边界条件

实现有限元模型建立、结构化网格生成及材料指派的自动化流程。基于该参数化模型开展模态频率对比验证

并结合LaRC失效准则对复合材料进行强度校核

分析极端工况下叶片的结构响应。结果表明：所建模型前六阶模态频率与参考结果的平均相对误差低于5%

叶尖最大位移满足塔架间隙约束

且复合材料失效因子均低于临界阈值

验证了模型精度与结构安全性。该方法通过节点坐标关联设计变量

能够显著提升大型叶片优化迭代效率

为复合材料叶片的设计优化与可靠性评估提供技术支撑。

Abstract

To address the low iterative efficiency and heavy reliance on manual intervention of traditional modeling methods in the structural optimization of large-scale wind turbine blades

this paper proposes a nodal coordinate-driven parametric modeling method. Taking the IEA 15 MW wind turbine blade as the research object

discrete nodes are adopted to control the blade geometry and mesh element distribution. A double-loop algorithm is employed to establish the topological relationships of elements in the spanwise and chordwise directions. By integrating composite layups

loads

and boundary conditions

an automated workflow for finite element model generation

structured mesh generation

and material assignment is realized. The proposed model is validated through modal frequency comparison. The LaRC failure criterion is adopted for the strength assessment of composite materials

and the structural responses under extreme operating conditions are analyzed. The results indicate that the average relative error of the first six modal frequencies between the developed model and the reference data is less than 5%. The maximum blade tip deflection satisfies the tower clearance constraint

and all composite failure indices are below the critical threshold

which verifies the model accuracy and structural safety. By correlating design variables with nodal coordinates

the proposed method significantly improves the iterative optimization efficiency of large blades

providing technical support for the design optimization and reliability evaluation of large composite wind turbine blades.

关键词

Keywords

references

Chiu P K, Roth-Johnson P, Wirz R E.Optimal structural design of biplane wind turbine blades[J]. Renewable Energy, 2020, 147: 2440-2452.

王永志, 张卫民, 康传明, 等. 基于CATIA二次开发的风力机叶片参数化建模[J]. 太阳能学报, 2012, 33(5): 723-726.

Chen C, Wang L, Niu M H.Research on the application of improved NSGA-Ⅱ in the structure design of wind turbine blade spar cap[J]. Frontiers in Energy Research, 2023, 11: 1160423.

Nie G J, Hu H, Zhong Z, et al.A complex Fourier series solution for free vibration of arbitrary straight-sided quadrilateral laminates with variable angle tows[J]. Mechanics of Advanced Materials and Structures, 2022, 29(8): 1081-1096.

Macquart T, Maes V, Langston D, et al.A new optimisation framework for investigating wind turbine blade designs[C]//Advances in Structural and Multidisciplinary Optimization. Braunschweig, Germany, 2018: 2044-2060.

王振刚, 唐雪, 蒋传鸿, 等. 大型风电叶片预埋叶根连接参数化建模及强度分析[J]. 复合材料科学与工程, 2022(10): 20-24, 37.

Yuan S, Ning W B, Li Z G, et al.Parametric modeling and optimal design of wind turbine blade structure[J]. Mechanics of Advanced Materials and Structures, 2026, 33(1): 2453114.

金想想, 马远卓, 赵振宙, 等. 复合材料风力机叶片参数化设计及优化[J]. 复合材料科学与工程, 2024(8): 39-44, 90.

许波峰, 李振, 朱紫璇, 等. 大型下风向柔性叶片参数化建模及两目标优化设计[J]. 太阳能学报, 2023, 44(3): 147-154.

翁柳青, 张景杭. 基于YJK-GAMA的空间网架结构参数化建模及二次利用研究[J]. 兰州文理学院学报(自然科学版), 2024, 38(5): 84-88.

杨建林, 贺傅江山, 吴琨营, 等. 基于遗传算法的自由曲面单层空间结构网格参数化自动生成及方向优化[J]. 建筑结构, 2024, 54(11): 107-112, 7.

Piegl L A, Tiller W.The NURBS book[M]. 2nd ed. Berlin, : Springer, 2012, 81-279.

Yang K H.Basic finite element method as applied to injury biomechanics[M]. Amsterdam: Academic Press, 2017.

Gaertner E, Rinker J, Sethuraman L, et al.Definition of the{IEA}15-megawatt offshore reference wind turbine: NREL/TP-5000-75698[R]. Golden, CO: National Renewable Energy Laboratory, 2020.

Lu M M, Ke S T, Wu H X, et al.A novel forecasting method of flutter critical wind speed for the 15 MW wind turbine blade based on aeroelastic wind tunnel test[J]. Journal of Wind Engineering and Industrial Aerodynamics, 2022, 230: 105195.

IEC 61400-1:2019 Wind energy generation systems Part-1: Design requirements[S].

高春彦, 刘泽, 史治宇. 风电机组塔架极限风载荷计算及对比研究[J]. 太阳能学报, 2019, 40(5): 1373-1380.

刘德程. 基于LaRC准则的先进复合材料失效行为研究[D]. 武汉: 武汉理工大学, 2021.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

风力机分段叶片螺栓连接构型失效机理研究

小型直线翼垂直轴风电叶片防除冰仿真研究

基于多尺度失效分析的含孔隙风电叶片主梁力学性能影响研究

基于模型实验的叶片覆冰对风力机气动性能影响研究

基于旋转气-液两相流的风电叶片雨凇/雾凇覆冰机制及特性对比研究