网络首发:2026-07-08,
纸质出版:2026
移动端阅览
张兵, 高中稳, 冯森森, 等. 高温熔盐混温罐混温性能研究[J]. 太阳能学报, 2026,47(6):806-814.
张兵, 高中稳, 冯森森, et al. 高温熔盐混温罐混温性能研究[J]. 2026, 47(6): 806-814.
张兵, 高中稳, 冯森森, 等. 高温熔盐混温罐混温性能研究[J]. 太阳能学报, 2026,47(6):806-814. DOI: 10.19912/j.0254-0096.tynxb.2025-0219.
张兵, 高中稳, 冯森森, et al. 高温熔盐混温罐混温性能研究[J]. 2026, 47(6): 806-814. DOI: 10.19912/j.0254-0096.tynxb.2025-0219.
采用Ansys Fluent软件研究高温熔盐混温罐混温过程的流动、传热及热力学特性
并分析不同结构对混温性能的影响。通过研究得到混温罐充盐过程罐内空气被熔盐加热造成一定的热量损失
使得实际的混温时间较理论计算时间长。在充盐过程
挡板结构层阻止一部分热流体与空气的换热
减少热量损失
挡板不开孔更有利于缩短混温时间。进口弯管结构中冷热流体接触充分
混温效果优于汇管结构。
With the development of concentrated solar power generation technology and the need for heat recovery from industrial exhaust gases and high-temperature flue gases
high-temperature molten salt power generation technology plays an increasingly important role. In some cases
due to the process needs
it is necessary to mix the low-temperature molten salt with the high-temperature molten salt to reach the desired temperature. In this paper
Ansys Fluent software was used to study the flow
heat transfer and thermodynamic characteristics of the mixing process in the high temperature molten salt mixing tank
and the influence of different structures on the mixing performance was also analyzed. According to the results
it is obtained that the air inside the tank is heated by the molten salt during the salt charging process of the mixing tank
resulting in a certain amount of heat loss
which makes the actual mixing time longer than the theoretical calculation time. In the salt charging process
the baffle structure prevents part of the heat exchange between the molten salt and the air
which reduces the heat loss
and the baffle is more conducive to shorten the mixing time without opening holes. Besides
for elbow counter-current inlet type
the cold and hot molten salt fully contact when they were out from the inlet
which show better mixing result than the manifold inlet structure.
崔凯平, 韩伟, 倪煜, 等. 熔盐储罐热分层混温过程研究[J]. 华电技术, 2020, 42(5): 8-13.
WANG Y J, LIU J N, MA X, et al.Numerical investigation on the thermal performance of a molten salt tank under different electric heating method[J]. Solar energy materials and solar cells, 2024, 278: 113183.
曹瑞峰, 赵浩, 高建. 单罐储热系统的动态特性数值研究[J]. 东北电力大学学报, 2020, 40(4): 61-68.
时华, 方文峰, 朱义凡, 等. 熔盐储罐预热过程的实验和模拟研究[J]. 中国电机工程学报, 2020, 40(18): 5972-5978.
余抒阳. 太阳能单罐熔盐储热特性数值模拟研究[D]. 吉林: 东北电力大学, 2020.
王钰森. 熔盐储热罐的设计研究[D]. 沈阳: 沈阳工程学院, 2019.
张夏. 中低温熔盐储热系统的容量配置与热力性能分析[D]. 北京: 华北电力大学, 2019.
ABÁNADES A, RODRÍGUEZ-MARTÍN J, RONCAL J J, et al. Proposal of a thermocline molten salt storage tank for district heating and cooling[J]. Applied thermal engineering, 2023, 218: 119309.
王钰森, 初泰青, 王智, 等. 熔盐储热罐散热试验研究[J]. 沈阳工程学院学报(自然科学版), 2019, 15(1): 54-58.
顾清之, 张艳梅, 关弘扬, 等. 熔盐储罐冷却过程的瞬态分析[J]. 储能科学与技术, 2017, 6(4): 782-788.
YUE S, LIU X Q.Study of heat transfer performance of insulating layer of molten salt storage tank[J]. IOP conference series: earth and environmental science, 2020, 512(1): 012019.
ZHANG X M, WU Y T, ZHANG C C.Temperature distribution and strength analysis of large-scale molten salt thermal storage tank[J]. Journal of Beijing University of Technology, 2021, 47(9): 1064-1073.
PRIETO C, BLINDU A, CABEZA L F, et al.Molten salts tanks thermal energy storage: aspects to consider during design[J]. Energies, 2024, 17(1): 22.
ZHOU H, SHI H, ZHANG J K, et al.Experimental and numerical investigation of temperature distribution and heat loss of molten salt tank foundation at different scales[J]. Heat and mass transfer, 2020, 56(10): 2859-2869.
ZHOU H, SHI H, ZHU Y F, et al.An experimental investigation of temperature distribution and heat loss in molten salt tanks in concentrating solar power plants[J]. Journal of renewable and sustainable energy, 2020, 12: 014101.
岳松, 陈宇轩, 肖虎, 等. 熔盐储罐预热过程优化研究[J]. 太阳能学报, 2022, 43(10): 113-118.
0
浏览量
0
下载量
0
CSCD
关联资源
相关文章
相关作者
相关机构
京公网安备11010802024621