氢气快速加注过程建模与分析

薛龙昌; 邓佳佳; 黄靖钟; 刘斌; 庹中兰

doi:10.19912/j.0254-0096.tynxb.2023-1914

欢迎来到能源电力期刊网！

English Version 读者登录期刊登录

您当前的位置：

首页 >

文章列表页 >

氢气快速加注过程建模与分析

更新时间：2025-10-18

- 氢气快速加注过程建模与分析
- MODELLING AND ANALYSIS OF HYDROGEN FAST FILLING PROCESSES
- 太阳能学报 2025年46卷第3期页码：116-122
- 作者机构：
  
  1. 同济大学汽车学院,上海 201804
  2. 中车工业研究院有限公司,北京 100071
  3. 广西电力职业技术学院能源动力与环境工程学院,南宁 530007
  4. 石家庄铁道大学机械工程学院,石家庄 050043
- 作者简介：
- 基金信息：
  
  河北省科学院科技计划（2023PF03）;广西高校中青年教师科研基础能力提升项目（2024KY1384）
- DOI：10.19912/j.0254-0096.tynxb.2023-1914
  中图分类号： TK91
- 网络出版：2025-04-07，
  
  纸质出版：2025
- 稿件说明：
移动端阅览
薛龙昌, 邓佳佳, 黄靖钟, 刘斌, 庹中兰. 氢气快速加注过程建模与分析[J]. 太阳能学报, 2025, 46(3): 116-122.

Xue Longchang, Deng Jiajia, Huang Jingzhong, et al. MODELLING AND ANALYSIS OF HYDROGEN FAST FILLING PROCESSES[J]. 2025, 46(3): 116-122.
薛龙昌, 邓佳佳, 黄靖钟, 刘斌, 庹中兰. 氢气快速加注过程建模与分析[J]. 太阳能学报, 2025, 46(3): 116-122. DOI： 10.19912/j.0254-0096.tynxb.2023-1914.

Xue Longchang, Deng Jiajia, Huang Jingzhong, et al. MODELLING AND ANALYSIS OF HYDROGEN FAST FILLING PROCESSES[J]. 2025, 46(3): 116-122. DOI： 10.19912/j.0254-0096.tynxb.2023-1914.

摘要

采用数值模拟的方法

建立大规模快速加氢站的整体加注流程模拟分析模型

分析快速加注过程不同加注参数对列车储罐内氢气情况的影响特性。结果表明：三级压缩是最经济合理的压缩方式;当加注速度相差108 kg/h时

加注结束后储罐内氢气温度相差约5 K

与环境换热功率相差约20 kW;预冷温度对氢气温度和加注时间均有影响;当初始压力相差3/5 MPa时

加注时间相差约40/60 s。

Abstract

This study employs a numerical simulation method to establish a comprehensive simulation and analysis model for the fast refueling process at large-scale refueling stations for hydrogen trains. The investigation focuses on analyzing the influence of various refueling parameters on the hydrogen conditions within the train's storage tank during the rapid refueling process. The findings reveal that a three-stage compression proves to be the most economically viable compression method. A discrepancy of 108 kg/h in the refueling rate results in an approximate 5 K difference in the hydrogen temperature within the storage tank post-refueling

along with an approximately 20 kW variance in heat exchange with the environment. Furthermore

the pre-cooling temperature is identified as a factor affecting hydrogen temperature and refueling time. In scenarios where the initial pressure varies by 3/5 MPa

the refueling time exhibits an approximate difference of 40/60 seconds.

关键词

Keywords

references

李亮荣, 彭建, 付兵, 等. 碳中和愿景下绿色制氢技术发展趋势及应用前景分析[J]. 太阳能学报, 2022, 43(6): 508-520.

陈燕荣, 王晓波. 氢燃料电池在现代有轨电车上的应用[J]. 铁道车辆, 2017, 55(4): 14-17, 4.

SUN Y, ANWAR M, HASSAN N M S, et al. A review of hydrogen technologies and engineering solutions for railway vehicle design and operations[J]. Railway engineering science, 2021, 29(3): 212-232.

李娟. 驱动零碳的车化作天边的云[N]. 成都日报, 2023-01-03(001).

张诚, 檀志恒, 晁怀颇. “双碳” 背景下数据中心氢能应用的可行性研究[J]. 太阳能学报, 2022, 43(6): 327-334.

SAE J2601, Fueling protocols for light duty gaseous hydrogen surface vehicles SAE International[S].

ACOSTA B, MORETTO P, DE MIGUEL N, et al.JRC reference data from experiments of on-board hydrogen tanks fast filling[J]. International journal of hydrogen energy, 2014, 39(35): 20531-20537.

ORTIZ CEBOLLA R, ACOSTA B, DE MIGUEL N, et al.Effect of precooled inlet gas temperature and mass flow rate on final state of charge during hydrogen vehicle refueling[J]. International journal of hydrogen energy, 2015, 40(13): 4698-4706.

BOURGEOIS T, AMMOURI F, WEBER M, et al.Evaluating the temperature inside a tank during a filling with highly-pressurized gas[J]. International journal of hydrogen energy, 2015, 40(35): 11748-11755.

WOODFIELD P L, TAKANO T, MONDE M.Characteristics of heat transfer for hydrogen and wall during filling hydrogen into actual tank at high pressure[C]//ASME/JSME 2007 Thermal Engineering Heat Transfer Summer Conference Collocated with the ASME 2007 InterPACK Conference, July 8-12, 2007, Vancouver, British Columbia, Canada. 2009, 1069-1076.

ZHENG J Y, GUO J X, YANG J, et al.Experimental and numerical study on temperature rise within a 70 MPa type III cylinder during fast refueling[J]. International journal of hydrogen energy, 2013, 38(25): 10956-10962.

LI Q F, ZHOU J Q, CHANG Q, et al.Effects of geometry and inconstant mass flow rate on temperatures within a pressurized hydrogen cylinder during refueling[J]. International journal of hydrogen energy, 2012, 37(7): 6043-6052.

GALASSI M C, PAPANIKOLAOU E, HEITSCH M, et al.Assessment of CFD models for hydrogen fast filling simulations[J]. International journal of hydrogen energy, 2014, 39(11): 6252-6260.

WANG G X, ZHOU J Q, HU S J, et al.Investigations of filling mass with the dependence of heat transfer during fast filling of hydrogen cylinders[J]. International journal of hydrogen energy, 2014, 39(9): 4380-4388.

WU X, LIU J T, SHAO J W, et al.Fast filling strategy of type III on-board hydrogen tank based on time-delayed method[J]. International journal of hydrogen energy, 2021, 46(57): 29288-29296.

张镕驿, 王怀忠, 王依芮, 等. 车载高压氢气分级充注系统的设计与模拟[J]. 太阳能学报, 2022, 43(5): 427-432.

KIM S C, LEE S H, YOON K B.Thermal characteristics during hydrogen fueling process of type IV cylinder[J]. International journal of hydrogen energy, 2010, 35(13): 6830-6835.

周鑫. 车载储氢罐加注过程的模拟与性能预测[D]. 武汉: 武汉理工大学, 2020.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

车载高压氢气分级充注系统的设计与模拟

70 MPa Ⅲ型车载储氢气瓶充氢过程的热力学响应特性模拟

加氢站氢气泄漏试验研究