螺旋翅片和环形翅片对相变储能罐传热性能的影响

袁威; 韩瑞元; 杜双庆; 杨先亮

doi:10.19805/j.cnki.jcspe.2025.240452

欢迎来到能源电力期刊网！

English Version 期刊登录

您当前的位置：

首页 >

文章列表页 >

螺旋翅片和环形翅片对相变储能罐传热性能的影响

新能源与储能 | 更新时间：2026-07-27

- 螺旋翅片和环形翅片对相变储能罐传热性能的影响
- Impact of Spiral Fins and Circular Fins on Heat Transfer Performance in Phase Change Energy Storage Tanks
- 动力工程学报 2025年45卷第9期页码：1463-1473
- 作者机构：
  
  华北电力大学能源动力与机械工程学院,河北,保定,071003
- 作者简介：
  
  袁威(1989—),男,河南商丘人,讲师,博士,研究方向为可再生能源高效利用
  杨先亮(通信作者),男,高级工程师,博士,E-mail:yxl15820@163.com
- 基金信息：
  
  河北省自然科学基金资助项目(2022502052,E2022502001)
- DOI：10.19805/j.cnki.jcspe.2025.240452
  中图分类号：
- 网络首发：2025-09-16，
  
  纸质出版：2025
- 稿件说明：
移动端阅览
袁威,韩瑞元,杜双庆,杨先亮. 螺旋翅片和环形翅片对相变储能罐传热性能的影响动力工程学报, 2025, 45(9): 1463-1473 https://doi.

org/10.19805/j.cnki.jcspe.2025.240452
袁威,韩瑞元,杜双庆,杨先亮. 螺旋翅片和环形翅片对相变储能罐传热性能的影响动力工程学报, 2025, 45(9): 1463-1473 https://doi. DOI： 10.19805/j.cnki.jcspe.2025.240452.

org/10.19805/j.cnki.jcspe.2025.240452 DOI：

摘要

为研究螺旋翅片和环形翅片对垂直管壳式相变储能罐换热性能的影响

选取具有更好传热性能的翅片结构

并建立了光管、环形翅片和螺旋翅片的管壳式相变储能罐的物理模型。在考虑自然对流的情况下

对蓄热和放热过程进行了数值模拟

分析了不同储能罐中相变材料的温度场、固液相界面、平均温度、液相质量分数、不同监测点温度随时间的变化规律;探讨了不同储能罐的综合热性能表现

对比分析了影响储能罐蓄、放热速率的主要因素。结果表明:有无翅片对导热系数低的相变材料有重大影响

翅片结构能明显减少换热过程中储能罐内相变材料的熔化和凝固时间;径向伸展的环形翅片限制了自然对流

而螺旋翅片具有连续结构

具有3种结构中最好的换热速率

且随着翅片高度的增加

换热效果增强;蓄热过程中

在垂直方向

储能罐上部温度高

相变材料先熔化

径向靠近内管的相变材料熔化得快;放热过程则相反

垂直方向下部以及径向内侧的相变材料先凝固。

Abstract

To study the impact of spiral fins and circular fins on the heat transfer performance of the vertical tube-and-shell phase change energy storage tanks

the fin structure with better heat transfer performance was selected

and physical models of tube-and-shell phase change energy storage tanks with plain tubes

circular fins

and spiral fins were established. Considering natural convection

numerical simulations were conducted for the charging and discharging processes. The temporal variations of temperature field of the phase change materials

solid-liquid interface

average temperature

liquid phase mass fraction

and the temperatures at different monitoring points in various storage tanks were analyzed. The overall thermal performance of different storage tanks was discussed

and the main factors affecting the charging and discharging rate of the storage tanks were compared and analyzed. Results show that the presence or absence of fins has a significant impact on phase change materials with low thermal conductivity. The fin structure can significantly reduce the melting and solidification time of the phase change materials in the energy storage tanks during the heat transfer process. Radially extended circular fins restrict natural convection

while spiral fins

with their continuous structure

exhibit the best heat transfer rate among the three structures

and the heat transfer effect improves with increasing fin height. During the charging process

in the vertical direction

the upper part of the energy storage tank has a higher temperature

and the phase change materials melt first. In the radial direction

the phase change materials near the inner tube melt faster. The opposite occurs during the discharging process

where the phase change materials at the lower part in the vertical direction and the inner side in the radial direction solidify first.

关键词

Keywords

references

洪鼎华, 刘士琦, 陶汉中. 矩形腔相变蓄热装置蓄热性能的数值模拟及优化[J]. 可再生能源, 2018, 36(5): 690-695. HONG Dinghua, LIU Shiqi, TAO Hanzhong. Numerical simulation and optimization of heat transfer characteristics of rectangular cavity phase change heat storage[J]. Renewable Energy Resources, 2018, 36(5): 690-695.

王培伦, 彭志坚, 王述浩, 等. 弯管强化相变储热传热特性的模拟[J]. 储能科学与技术, 2012, 1(2): 116-122. WANG Peilun, PENG Zhijian, WANG Shuhao, et al. Numerical simulation of heat transfer behaviour of a twisted pipe containing a phase change material[J]. Energy Storage Science and Technology, 2012, 1(2): 116-122.

仝仓, 李祥立, 端木琳. 多管式相变蓄热器换热影响因素研究[J]. 太阳能学报, 2019, 40(8): 2299-2305. TONG Cang, LI Xiangli, DUANMU Lin. Study on heat transfer influence factors of multitube phase change thermal accumulator[J]. Acta Energiae Solaris Sinica, 2019, 40(8): 2299-2305.

程友良, 王敬双, 刘萌, 等. 太阳能蓄热分层水箱数值模拟优化分析[J]. 可再生能源, 2019, 37(10): 1448-1452. CHENG Youliang, WANG Jingshuang, LIU Meng, et al. Numerical simulation optimization analysis of solar thermal storage layered water tank[J]. Renewable Energy Resources, 2019, 37(10): 1448-1452.

SONI V, KUMAR A, JAIN V K. Performance evaluation of nano-enhanced phase change materials during discharge stage in waste heat recovery[J]. Renewable Energy, 2018, 127: 587-601.

KARAMI B, AZIMI N, AHMADI S. Increasing the electrical efficiency and thermal management of a photovoltaic module using expanded graphite (EG)/paraffin-beef tallow-coconut oil composite as phase change material[J]. Renewable Energy, 2021, 178: 25-49.

张媛媛, 陈昆伦, 姚业成, 等. 相变填充床熔盐斜温层储热系统梯级储热特性[J]. 工程热物理学报, 2023, 44(3): 787-794. ZHANG Yuanyuan, CHEN Kunlun, YAO Yecheng, et al. Cascade heat storage characteristics of multiphase molten salt thermocline heat storage system[J]. Journal of Engineering Thermophysics, 2023, 44(3): 787-794.

ANISH R, MARIAPPAN V, SURESH S. Experimental investigation on melting and solidification behaviour of erythritol in a vertical double spiral coil thermal energy storage system[J]. Sustainable Cities and Society, 2019, 44: 253-264.

YUAN Yanping, CAO Xiaoling, XIANG Bo, et al. Effect of installation angle of fins on melting characteristics of annular unit for latent heat thermal energy storage[J]. Solar Energy, 2016, 136: 365-378.

丛钰, 曹丽华, 孟雨欣, 等. 变比例相变级联堆积床的蓄热特性研究[J]. 动力工程学报, 2023, 43(3): 283-291. CONG Yu, CAO Lihua, MENG Yuxin, et al. Study on heat storage characteristics of variable proportion phase change cascade packed bed[J]. Journal of Chinese Society of Power Engineering, 2023, 43(3): 283-291.

ZHANG Chengbin, LI Jie, CHEN Yongping. Improving the energy discharging performance of a latent heat storage (LHS) unit using fractal-tree-shaped fins[J]. Applied Energy, 2020, 259: 114102.

ROZENFELD A, KOZAK Y, ROZENFELD T, et al. Experimental demonstration, modeling and analysis of a novel latent-heat thermal energy storage unit with a helical fin[J]. International Journal of Heat and Mass Transfer, 2017, 110: 692-709.

刘赟, 赵旭, 申文然, 等. 扰流参数和非均匀颗粒结构参数对填充床相变蓄热器蓄热特性的影响[J]. 动力工程学报, 2023, 43(8): 974-982. LIU Yun, ZHAO Xu, SHEN Wenran, et al. Effect of turbulence and non-uniform particle structure on heat storage performance of packed bed phase-change thermal storage tank[J]. Journal of Chinese Society of Power Engineering, 2023, 43(8): 974-982.

SCIACOVELLI A, GAGLIARDI F, VERDA V. Maximization of performance of a PCM latent heat storage system with innovative fins[J]. Applied Energy, 2015, 137: 707-715.

毛前军, 陈凯莉. 楔形管壳式蓄热罐的传热性能[J]. 储能科学与技术, 2022, 11(11): 3658-3666. MAO Qianjun,CHEN Kaili. Heat transfer performance study of wedge-shaped shell-and-tube heat storage tank[J]. Energy Storage Science and Technology, 2022, 11(11): 3658-3666.

陈刚, 杨茉, 张政, 等. 底部加热方腔内的相变传热过程及其非线性特性[J]. 动力工程学报, 2020, 40(10): 815-819, 831. CHEN Gang, YANG Mo, ZHANG Zheng,et al. Phase change heat transfer process in a square bottom-heated cavity and the nonlinearity[J]. Journal of Chinese Society of Power Engineering, 2020, 40(10): 815-819, 831.

ZHANG Lei, ZHOU Jun, ZUO Simeng, et al. Anti-freezing mechanism of the direct air-cooled system by splitting columns operation[J]. International Communications in Heat and Mass Transfer, 2024, 158: 107883.

ZHANG Lei, AN Guangyao, LANG Jinhua, et al. Investigation of the unsteady flow mechanism in a centrifugal compressor adopted in the compressed carbon dioxide energy storage system[J]. Journal of Energy Storage, 2024, 104: 114488.

LI Yongyi, DING Jiaxin, SUN Haibo, et al. Performance analysis of the inverted Brayton cycle in the atmospheric solid oxide fuel cell hybrid power system[J]. Energy Conversion and Management, 2024, 316: 118828.

ZHANG Lei, YANG Fan, AN Guangyao, et al. Investigation of a rotating stall in a supercritical CO 2 centrifugal compressor[J ] . Physics of Fluids, 2024, 36(5): 054102.

LIU Xiangdong, HUANG Yongping, ZHANG Xuan, et al. Investigation on charging enhancement of a latent thermal energy storage device with uneven tree-like fins[J]. Applied Thermal Engineering, 2020, 179: 115749.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

不同维度下大型VAWT并联布置气动特性分析

考虑动态失速特性的翼型气动外形优化研究

压力旋流喷嘴结构参数对雾化性能的影响及优化

掺烧棉秆对1000MW旋流对冲锅炉最低稳燃负荷的影响

基于解耦方法探究N2、CO2对生物质气层流燃烧速度的影响