1. 东南大学 能源与环境学院,江苏,南京,210096
2. 江苏大学 能源与动力工程学院,江苏,镇江,212013
[ "杨文龙(2002—),男,四川南充人,硕士研究生,研究方向为超临界二氧化碳强化换热,E-mail:3280107183@qq.com" ]
网络出版:2025-02-15,
纸质出版:2025
移动端阅览
杨文龙,花宇,屈健. 两相回路热虹吸管的三维模拟研究动力工程学报, 2025, 45(2): 171-181 https://doi.
org/10.19805/j.cnki.jcspe.2025.230698
杨文龙,花宇,屈健. 两相回路热虹吸管的三维模拟研究动力工程学报, 2025, 45(2): 171-181 https://doi. DOI: 10.19805/j.cnki.jcspe.2025.230698.
org/10.19805/j.cnki.jcspe.2025.230698 DOI:
提出并设计了一种带盘管式冷凝器和储液罐的回路热虹吸管
研究了3种充液率下回路热虹吸管的启动和内部流动传热特性。由于回路热虹吸管内沸腾和冷凝过程之间具有强耦合关系
对描述相变的传统Lee模型进行了改进
并引入了饱和温度与局部压力之间的关系
以准确模拟回路热虹吸管内的气液相变和流动传热过程。结果表明:该模型对回路热虹吸管内传热传质过程的预测效果良好;当回路热虹吸管在80%充液率的准稳态工况下运行时
完整的流动循环整体可分为液体过冲、液体回落和大气泡推动液体上升3个阶段
并且随着加热功率的增大
振荡更加明显;回路热虹吸管在仅依靠工质的流动循环和相变传热时
等效导热系数可超过15 000 W/(mK);在较高热流下
80%充液率的回路热虹吸管形成了速度较快且持续稳定的流动循环
表现出较好的传热性能。
A loop thermosiphon with coil condenser and liquid storage tank was proposed and designed
and the start-up and internal flow heat transfer characteristics of the loop thermosiphon were studied under three liquid filling rates. Due to the strong coupling relationship between boiling and condensation processes in the loop thermosiphon
the traditional Lee model for describing phase transitions was improved
and the relationship between saturation temperature and local pressure was introduced to accurately simulate the gas-liquid phase transition and flow heat transfer process in the loop thermosiphon. Results show that the model has a good predictive effect on the heat and mass transfer processes inside the loop thermosiphon. When the loop thermosiphon operates in a quasi steady state with filling rate of 80%
the complete flow cycle can be divided into liquid overshoot
liquid drawdown
and large bubbles pushing the liquid up. As the heating power increases
the oscillation becomes more pronounced. When relying solely on the flow circulation and phase change heat transfer of the working fluid
the equivalent thermal conductivity of the loop thermosiphon can exceed 15 000 W/(mK). At higher heat flux
the loop thermosiphon with 80% liquid filling rate forms a fast and continuously stable flow cycle
exhibiting good heat transfer performance.
尚娟, 王珍梦. 数字经济赋能绿色经济发展的效应研究[J]. 生态经济, 2023, 39(3): 47-56. SHANG Juan, WANG Zhenmeng. Research on the effect of digital economy enabling green economy development[J]. Ecological Economy, 2023, 39(3): 47-56.
ZHANG Yin, WEI Zhiyuan, ZHANG Mingshan. Free cooling technologies for data centers: energy saving mechanism and applications[J]. Energy Procedia, 2017, 143: 410-415.
ZHANG Liyu, LIU Y Y, GUO X, et al. Experimental investigation and economic analysis of gravity heat pipe exchanger applied in communication base station[J]. Applied Energy, 2017, 194: 499-507.
毛春林, 刘汉敏, 孙健, 等. 芯片封装均温板壳体的传热特性研究[J]. 制冷学报, 2022, 43(1): 138-144. MAO Chunlin, LIU Hanming, SUN Jian, et al. Research on heat transfer characteristics of vapor chamber integrated heat spreader for chip package[J]. Journal of Refrigeration, 2022, 43(1): 138-144.
曹滨斌, 李惟毅. 储液器对脉动热管启动及传热性能的影响[J]. 动力工程学报, 2010, 30(11): 861-865. CAO Binbin, LI Weiyi. Effects of liquid receiver on the start-up and heat transfer performance of the pulsating heat pipe[J]. Journal of Chinese Society of Power Engineering, 2010, 30(11): 861-865.
战洪仁, 张海松, 李春晓, 等. 重力热管流动与传热特性的数值研究[J]. 动力工程学报, 2017, 37(7): 540-545. ZHAN Hongren, ZHANG Haisong, LI Chunxiao, et al. Simulation study on flow and heat-transfer characteristics of gravity heat pipes[J]. Journal of Chinese Society of Power Engineering, 2017, 37(7): 540-545.
RAMAKRISHNAN B, ALISSA H, MANOUSAKIS I, et al. CPU overclocking: a performance assessment of air, cold plates, and two-phase immersion cooling[J]. IEEE Transactions on Components, Packaging and Manufacturing Technology, 2021, 11(10): 1703-1715.
孙海彤, 虞斌, 涂善东. 核电安全壳中分离式热管蒸发段流动沸腾模拟[J]. 动力工程学报, 2018, 38(11): 941-948. SUN Haitong, YU Bin, TU Shandong. Boiling flow simulation for evaporation section of separated heat pipes in nuclear power plant containments[J]. Journal of Chinese Society of Power Engineering, 2018, 38(11): 941-948.
VASILIEV L, ZHURAVLYOV A, KUZMICH M, et al. Development and testing of a novel horizontal loop thermosyphon as a kW-class heat transfer device[J]. Applied Thermal Engineering, 2022, 200: 117682.
WANG Kuiming, HU Chengzhi, CAI Yong, et al. Investigation of heat transfer and flow characteristics in two-phase loop thermosyphon by visualization experiments and CFD simulations[J]. International Journal of Heat and Mass Transfer, 2023, 203: 123812.
CAO Jingyu, ZHENG Zhanying, ASIM M, et al. A review on independent and integrated/coupled two-phase loop thermosyphons[J]. Applied Energy, 2020, 280: 115885.
KISEEV V, SAZHIN O. Heat transfer enhancement in a loop thermosyphon using nanoparticles/water nanofluid[J]. International Journal of Heat and Mass Transfer, 2019, 132: 557-564.
ZHANG Hainan, SHAO Shuangquan, XU Hongbo, et al. Experimental investigation on a loop thermosyphon with three evaporators: unique startup and oscillation phenomena[J]. International Journal of Refrigeration, 2019, 99: 363-370.
陶建云. 泵驱两相流回路系统的热动态特性研究[D]. 南京: 东南大学, 2020.
卫铃佼. 大充液率环路热虹吸管传热特性研究[D]. 北京: 中国科学院研究生院(工程热物理研究所), 2015.
KLOCZKO S, FAGHRI A, LI Yuhua. Is a non-phase change heat pipe a new heat pipe?[J]. International Journal of Heat and Mass Transfer, 2019, 145: 118676.
LIU Yun, LI Zhigang, LI Yuhua, et al. Heat transfer and instability characteristics of a loop thermosyphon with wide range of filling ratios[J]. Applied Thermal Engineering, 2019, 151: 262-271.
LIU Yun, LI Zhigang, LI Yuhua, et al. Experimental investigation of geyser boiling in a two-phase closed loop thermosyphon with high filling ratios[J]. International Journal of Heat and Mass Transfer, 2018, 127: 857-869.
刁伟, 程毅, 徐启航, 等. 基于LBM的大尺度水流运动三维模拟方法及其GPU并行实现[J]. 水电能源科学, 2022, 40(7): 131-135. DIAO Wei, CHENG Yi, XU Qihang, et al. Lattice Boltzmann method for large-scale flow three-dimensional simulation and realization by GPU[J]. Water Resources and Power, 2022, 40(7): 131-135.
PARK S H, KIM Y S, KIM S Y, et al. Numerical study on the two-phase flow pattern and temperature distribution in a loop thermosyphon as a defrost device at the evaporator in the refrigerator[J]. Journal of Mechanical Science and Technology, 2018, 32(12): 5927-5936.
WANG Yinfeng, WANG Xiaoyuan, CHEN Haijun, et al. A combined CFD/visualized investigation of two-phase heat and mass transfer inside a horizontal loop thermosiphon[J]. International Journal of Heat and Mass Transfer, 2017, 112: 607-619.
YAO Huicong, GUO Lingfeng, LIU Hao, et al. Characteristics of phase-change flow and heat transfer in loop thermosyphon: three-dimension CFD modeling and experimentation[J]. Case Studies in Thermal Engineering, 2022, 35: 102070.
GIBOU F, CHEN Liguo, NGUYEN D, et al. A level set based sharp interface method for the multiphase incompressible Navier-Stokes equations with phase change[J]. Journal of Computational Physics, 2007, 222(2): 536-555.
KHARANGATE C R, MUDAWAR I. Review of computational studies on boiling and condensation[J]. International Journal of Heat and Mass Transfer, 2017, 108: 1164-1196.
李琳, 刘存良, 杨祺, 等. 微细管道内R141b沸腾气液两相流动与换热特性数值仿真[J]. 推进技术, 2018, 39(4): 802-809. LI Lin, LIU Cunliang, YANG Qi, et al. Numerical simulations on two-phase boiling flow and heat transfer of refrigerant R141b in micro/mini-channel[J]. Journal of Propulsion Technology, 2018, 39(4): 802-809.
BRACKBILL J U, KOTHE D B, ZEMACH C. A continuum method for modeling surface tension[J]. Journal of Computational Physics, 1992, 100(2): 335-354.
ZHANG Tao, QU Jian, HUA Yu. Heat transfer characteristics and operational visualization of two-phase loop thermosyphon[J]. Applied Thermal Engineering, 2023, 228: 120520.
陶文铨. 传热学[M]. 5版. 北京: 高等教育出版社, 2019.
0
浏览量
49
下载量
0
CSCD
关联资源
相关文章
相关作者
相关机构
京公网安备11010802024621