EN清洁化发展下废风电齿轮油回收方式探讨
清洁化发展下废风电齿轮油回收方式探讨
- 热力发电 2026年55卷第1期 页码：30-38
- 作者机构：
国能龙源环保有限公司
- 作者简介：
- 基金信息：国家能源集团科技创新项目（GJNY-24-27-2）~~
DOI：10.19666/j.rlfd.202508069
中图分类号： TM315;X773-
纸质出版：2026
- 稿件说明：
移动端阅览
[1]赵晶,王洪亮,侯波,等.清洁化发展下废风电齿轮油回收方式探讨[J].热力发电,2026,55(01):30-38.
[1]赵晶,王洪亮,侯波,等.清洁化发展下废风电齿轮油回收方式探讨[J].热力发电,2026,55(01):30-38. DOI： 10.19666/j.rlfd.202508069.
DOI：10.19666/j.rlfd.202508069.
摘要
近年来，风电累计装机容量的快速扩增带动了风电运维市场需求持续攀升，风电齿轮油是运维中不可或缺的重要组成部分。因废风电齿轮油含有重金属、降解添加剂等有害成分，被归类为危险废物，其高效资源化与无害化处理对实现风电行业清洁化发展至关重要。首先，基于风电齿轮油的特性与组成，阐述了其在运行过程中因外来污染、高温高压氧化及添加剂降解等原因导致的运动黏度、倾点、水分、颗粒污染度、酸值及元素（Fe、P、S等）等典型性能指标变化规律和原因；系统梳理了当前废矿物油再生工艺的最新研究进展，涵盖预处理及分子蒸馏、溶剂萃取、加氢精制等主流技术路线，并分析了上述方法在延长废风电齿轮油寿命及回收再生上的可行性及局限性，如处理效率低、深度不足以及规模化应用受限等问题；最后，从产业层面、技术层面、全链条管理方面探讨了以合成型风电齿轮油为代表的高价值废油未来的发展方向，强调构建分级分类回收体系、开发绿色高效再生工艺与全生命周期管理将是实现风电行业循环经济的关键路径。
Abstract
The rapid expansion of the cumulative installed capacity of wind power in recent years has driven the continuous growth of market demand for wind power operation and maintenance(O&M). Lubricating oil for wind turbine gearboxes is an indispensable and crucial component in O&M. The waste lubricating oil for wind turbine gearboxes is classified as hazardous waste due to its harmful components such as heavy metals and degraded additives. Its efficient recycling and harmless treatment are crucial for achieving clean development in the wind power industry. Firstly
based on the characteristics and composition of waste lubricating oil
the variation laws and underlying causes of typical performance indicators during operating are expounded
including kinematic viscosity
pour point
moisture content
particle contamination level
acid value
and elements(e.g. Fe
P
and S). These variations are primarily induced by factors such as external contamination
oxidation at high temperatures and pressures
and additive degradation. On this basis
the latest research progress in current waste mineral oil regeneration processes is systematically summarized
covering mainstream technical routes such as pretreatment
molecular distillation
solvent extraction
and hydrofining. Furthermore
the feasibility and limitations of the aforementioned methods in extending the service life of waste lubricating oil and realizing its recovery and regeneration are analyzed. The identified limitations include issues such as low treatment efficiency
insufficient processing depth
and restricted application. Finally
the future development directions of high-value waste oils represented by synthetic lubricating oil for wind turbine gearboxes are discussed from the perspectives of industrial development
technological advancement and life management. It emphasizes that establishing a classified recycling system
developing green and efficient regeneration processes
and implementing life management will be the key pathways to realizing a circular economy in the wind power industry.
关键词
Keywords
references
张美琼,柯友胜,张霞玲,等.矿物油组分生产风电齿轮油的可行性分析[J].润滑油, 2018(5):19-23.ZHANG Meiqiong, KE Yousheng, ZHANG Xialing, et al.Feasibility analysis on mineral oil used in gear oil for wind power[J]. Lubricating Oil, 2018(5):19-23.
陈惠卿.风电齿轮油供应商调查[J].合成润滑材料,2017(2):26-31.CHEN Huiqing. Survey of wind turbine gear oil suppliers[J]. Synthetic Lubricants, 2017(2):26-31.
YU L H, LEE C H, KRENG V B. The application of fuzzy delphi method and fuzzy AHP in lubricant regenerative technology selection[J]. Expert Systems with Applications, 2010, 37(1):419-425.
JESSICA P, MARIA E R, BESSER, et al. A comprehensive review of sustainable approaches for synthetic lubricant components[J]. Green Chemistry Letters and Reviews, 2023, 16(1):2185547-2185575.
FERDINAND RWP W, WASIUCIONEK M, HUTTNER G, et al. Ansa-metallocene derivatives:VII. synthesis and crystal structure of a chiral ansa-zirconocene derivative with ethylene-bridged tetrahydroindenyl ligands[J].Journal of Organometallic Chemistry, 1985, 288(1):63-67.
YURY V K, SCHWAB FREDERICK C. Post-oligomerization of alpha-olefin oligomers:a route to singlecomponent and multicomponent synthetic lubricating oils[J]. Journal of Applied Polymer Science, 2009, 111(1):273-280.
李浩,盛晓明,杨瑞晗,等.风力发电润滑油技术与市场[J].山东化工, 2025(2):89-91.LI Hao, SHENG Xiaoming, YANG Ruihan, et al.Technological progress and market outlook for gear lubricating oil of wind driven generator[J]. Shandong Chemical Industry, 2025(2):89-91.
BHAWNA S, VERMA A, KUKRETY A, et al. Effective polymerization of linear higher alpha olefins from refinery stream for lubricant application[J]. Polymer Engineering&Science, 2023, 63(6):1691-1701.
韩雪,张文慧,高杨,等.风电机组齿轮箱润滑油使用寿命影响因素及延寿策略[J].中国石油和化工标准与质量, 2024(24):16-18.HAN Xue, ZHANG Wenhui, GAO Yang, et al. Factors affecting service life of wind turbine gearbox lubricating oil and strategies for life extension[J]. China Petroleum and Chemical Standard and Quality Journal, 2024(24):16-18.
杜静宇,曹治,任鑫,等.风电机组齿轮箱润滑油指标分析及国产化研究[J].热力发电, 2025, 54(4):42-50.DU Jingyu, CAO Zhi, REN Xin, et al. Indicator analysis and localization research of lubricating oil for wind turbine gearbox[J]. Thermal Power Generation, 2025,54(4):42-50.
赖右福,王可可,吕小林,等.风电用油劣化原因分析及维护[J].设备管理与维修, 2023(24):78-80.LAI Youfu, WANG Keke, LYU Xiaolin, et al. Degradation cause analysis and maintenance for wind turbine oils[J].Plant Maintenance Engineering, 2023(24):78-80.
胡志红,张秀丽,宋鹏,等.风电齿轮箱润滑油污染物及油中磨粒状态分析[J].润滑与密封, 2018(1):92-97.HU Zhihong, ZHANG Xiuli, SONG Peng, et al. The analysis of contamination and abrasive state in wind gear oil[J]. Lubrication Engineering, 2018(1):92-97.
唐金伟,李烨峰,刘永洛,等.聚α-烯烃齿轮油老化趋势及其再生处理研究[J].风能, 2017(10):74-77.TANG Jinwei, LI Yefeng, LIU Yongluo, et al. Research on aging trends and regeneration treatment of polyalphaolef in gear oils[J]. Wind Energy, 2017(10):74-77.
张文,陈雷,李蛟,等.风电机组齿轮箱润滑油的精过滤技术[J].中国设备工程, 2019(9):228-231.ZHANG Wen, CHEN Lei, LI Jiao, et al. Precision filtration technology for wind turbine gearbox lubricating oil[J]. China Plant Engineering, 2019(9):228-231.
杨鑫,许红,胡卫勋,等.基于超临界CO2萃取再生废润滑油[J].化工进展, 2023(10):5399-5405.YANG Xin, XU Hong, HU Weixun, et al. Regeneration of waste lubricating oil based on supercritical CO2extraction[J]. Chemical Industry and Engineering Progress, 2023(10):5399-5405.
废矿物油回收与再生利用导则:GB/T 17145—2024[S].北京:中国标准出版社, 2024:3.Guidelines for recycling of used mineral oil:GB/T17145—2024[S]. Beijing:Standards Press of China,2024:3.
ANTONINA K, MÄKI A P, MURZIN D Y. Technology for rerefining used lube oils applied in Europe:a review[J]. Journal of Chemical Technology&Biotechnology, 2013, 88(10):1780-1793.
UFUK V. Waste mineral oils re-refining with physicochemical methods[J]. Turkish Journal of Engineering, 2020,4(2):62-69.
BOADU K O, JOEL O F, ESSUMANG D K, et al. A review of methods for removal of contaminants in used lubricating oil[J]. Chemical Science International Journal,2019, 26(4):1-11.
MOTSHUMI J D, MUZENDA E, PILUSA T J, et al. A comparison of waste lubricating oil treatment techniques[C]//Proceedings of the 2nd International Conference on Environment, Agriculture and Food Sciences. 2013:25-26.
王莉,韩健,杨超,等.废润滑油再生技术浅析[J].润滑油, 2020(1):13-20.WANG Li, HAN Jian, YANG Chao, et al. A brief analysis of the regeneration technology on waste lubricating oil[J].Lubricating Oil, 2020(1):13-20.
LISAN G, NOBEL C E, LONGSHORE L, et al. Life cycle carbon footprint of re-refined versus base oil that is not rerefined[J]. ACS Sustainable Chemistry&Engineering,2014, 2(2):158-164.
WANG S R, GU Y L , LIU Q, et al. Separation of bio-oil by molecular distillation[J]. Fuel Processing Technology,2009, 90(5):738-745.
周松锐,尹英遂,王媛媛,等.短程蒸馏技术在废润滑油再生工艺中的应用[J].化工进展, 2006(11):1371-1374.ZHOU Songrui, YIN Yingsui, WANG Yuanyuan, et al.Application study of regeneration of waste lubricating oil with short-path distillating technology[J]. Chemical Industry and Engineering Progress, 2006(11):1371-1374.
尹英遂,冯明,黄卫星.废润滑油再生分子蒸馏窄分技术应用研究[J].现代化工, 2010(2):66-69.YIN Yingsui, FENG Ming, HUANG Weixing.Application of molecular distillation narrow fraction technology in waste lubricating oil regeneration[J].Modern Chemical Industry, 2010(2):66-69.
PINHEIRO C T, QUINA M J, GANDO-FERREIRA L M.New methodology of solvent selection for the regeneration of waste lubricant oil using greenness criteria[J]. ACS Sustainable Chemistry&Engineering,2018, 6(5):6820-6828.
倪璇,孙然,王德慧,等.溶剂法废润滑油再生工艺的研究进展[J].应用化工, 2018(8):1782-1785.NI Xuan, SUN Ran, WANG Dehui, et al. The research progress of waste lubricating oil regeneration process by solvent method[J]. Applied Chemical Industry, 2018(8):1782-1785.
韩忠义,金月昶.无酸法回收车用废润滑油的工艺研究[J].当代化工, 2015(5):1165-1168.HAN Zhongyi, JIN Yuechang. Study on the recovery technology of used lubricating oil of vehicle with acid-free method[J]. Contemporary Chemical Industry, 2015(5):1165-1168.
WHISMAN M L, GOETZINGER J W, COTTON F O.Method for reclaiming waste lubricating oils[J].BETC/ERDA, 1977, 24(2):32-37.
宋巍.润滑油双溶剂精制的实验成果[J].化工设计,2004(5):11-18.SONG Wei. Experimental study on dual-solvent refining of lubricating oil[J]. Chemical Engineering Design,2004(5):11-18.
王利芳,郭大光,任雅琳.溶剂辅助糠醛精制废润滑油[J].化工进展, 2011(2):402-406.WANG Lifang, GUO Daguang, REN Yalin. Production of lubricating oil from waste lubricating oil by co-solvent assisted furfural purification[J]. Chemical Industry and Engineering Progress, 2011(2):402-406.
赵琳,闫锋,郭大光,等.新型复合溶剂回收废润滑油工艺探究[J].辽宁石油化工大学学报, 2013(2):27-31.ZHAO Lin, YAN Feng, GUO Daguang, et al. New mixed solvent of waste lubricant regeneration research process[J]. Journal of Liaoning Petrochemical University,2013(2):27-31.
JIANG J C, AN Z X, LI M X , et al. Comparison of ribavirin degradation in the UV/H2O2 and UV/PDS systems:Reaction mechanism, operational parameter and toxicity evaluation[J]. Journal of Environmental Chemical Engineering, 2023, 11(1):109193-109203.
SUN Q Y, FAN Y J, YANG J, et al. Role of trace TEMPO as electron shuttle in enhancing chloroquine phosphate elimination in UV-LED-driven persulfate activation process[J]. Journal of Environmental Chemical Engineering, 2022, 10(6):108641-108653.
苏佩汝，李明,张晓娜,等.废润滑油NMP精制工艺参数的研究[J].甘肃科技纵横, 2019(2):40-43.SU Peiru, LI Ming, ZHANG Xiaona, et al. Study on process parameters of NMP refining for waste lubricating oil[J]. Gansu Science and Technology Horizontal,2019(2):40-43.
韩丽君,任雅琳,吴桐,等.工业废润滑油再生工艺的研究[J].辽宁石油化工大学学报, 2010(4):11-14.HAN Lijun, REN Yalin, WU Tong, et al. Recycling process of industrial waste lubricating oil[J]. Journal of Liaoning Shihua University, 2010(4):11-14.
侯文贵,刘国成.废润滑油再生技术的研究进展[J].材料导报, 2018(增刊2):254-256.HOU Wengui, LIU Guocheng. Advances in waste lubricating oil regeneration techniques[J]. Materials Review, 2018(Suppl.2):254-256.
ALI M F, RAHMAN F, HAMDAN A J. Techno-economic evaluation of waste lube oil rerefining[J]. International Journal of Production Economics, 1996, 42(3):263-273.
刘宾,柴永明,刘晨光,等.一种废润滑油加氢循环利用方法:ZL202011257524.0[P]. 2022-04-26[2025-08-29].LIU Bin, CHAI Yongming, LIU Chenguang, et al. A hydrotreating recycling process for waste lubricating oil:ZL 202011257524.0[P]. 2022-04-26[2025-08-29].
JIANG Z X, CHU Q Y, YANG H Y, et al. Kinetic model for removing phosphorus and zinc from waste lubricating oil by pyrolysis[J]. Process Safety and Environmental Protection, 2021, 148:980-991.
YANG H Y, ZHANG M X, CHU Q Y, et al. Pyrolysis process and mechanism for calcium elimination of used lubricating oil[J]. Journal of Analytical and Applied Pyrolysis, 2022, 165:105540-105552.
蒲宸光,周康,于海.风电齿轮油运行状态分析[J].合成润滑材料, 2024(4):22-25.PU Chenguang, ZHOU Kang, YU Hai. Analysis of the wind power gear oil during operation[J]. Synthetic Lubricants, 2024(4):22-25.
王娟,付龙飞,李烨峰,等.风力发电机齿轮润滑油现场再生处理系统及方法:ZL201910610947.7[P]. 2024-01-23[2025-08-29].WANG Juan, FU Longfei, LI Yefeng, et al. On-site regeneration system and method for wind turbine gearbox lubricating oil:ZL201910610947.7[P]. 2024-01-23[2025-08-29].
唐金伟,王娟,李烨峰,等.风电齿轮油再生处理用强极性介孔吸附剂及其制备方法:ZL201710570477.7[P].2020-03-31[2025-08-29].TANG Jinwei, WANG Juan, LI Yefeng, et al. Strongly polar mesoporous adsorbent for wind turbine gear oil regeneration and preparation method:ZL201710570477.7[P]. 2020-03-31[2025-08-29].
杨东祥,凌海,徐健,等.一种风力发电齿轮箱润滑油在线回收系统:ZL 201810862651.X[P]. 2018-12-18[2025-08-29].YANG Dongxiang, LING Hai, XU Jian, et al. Online reclamation system for wind turbine gearbox lubricating oil:ZL201810862651.X[P]. 2018-12-18[2025-08-29].
王可可,牛犇,王明明,等.一种风机齿轮油净化再生设备及再生方法:ZL202410447671.6[P]. 2024-07-16[2025-08-29].WANG Keke, NIU BEN, WANG Mingming, et al.Purification and regeneration apparatus and method of wind turbine gear oil:ZL202410447671.6[P]. 2024-07-16[2025-08-29].
施仲扬.絮凝-吸附法再生风电废润滑油实验研究[D].兰州:兰州大学, 2018:55-56.SHI Zhongyang. Experimental study on the regeneration ofwind power waste lubricating oil by flocculationadsorption method[D]. Lanzhou:Lanzhou University,2018:55-56.
魏浩栋,马娇娜,马捷,等.一种废润滑油再生处理设备:ZL202021741111.5[P]. 2021-05-28[2025-08-29].WEI Haodong, MA Jiaona, MA Jie, et al. Regeneration system for waste lubricating oil:ZL201810862651.X[P].2018-12-18[2025-08-29].
龚海峰,焦昭杰,陈爽,等.一种废风电润滑油加氢催化剂及其在废风电润滑油再生基础油中的应用:ZL202420413364.6[P]. 2024-06-28[2025-08-29].GONG Haifeng, JIAO Zhaojing, CHEN Shuang, et al.Hydrotreating catalyst for waste wind turbine lubricating oil and application in regenerating base oil:ZL202420413364.6[P]. 2024-06-28[2025-08-29].
0
浏览量
0
下载量
0
CSCD
- Meta-XML下载
- BibTeX下载
- Endnote下载
- RefMan 下载
- NoteExpress下载
- NoteFirst下载
关联资源
相关文章
相关作者
相关机构
AI问答- 技术支持由北京北大方正电子有限公司提供 京ICP备09064830号-19
京公网安备11010802024621 - 本系统建议在Chrome、 IE9+ 以上版本浏览器阅读本站内容，360浏览器请切换至极速模式
- Cookies帮助我们提供服务并提供个性化体验。使用本网站，即表示您同意我们使用Cookies