融合机理模型和参数辨识的锅炉主蒸汽温度建模方法

李俊杰; 张奕楠; 杨雨; 道尔吉苏荣; 张翔; 唐晓宇; 王文海; 张涛; 张波

doi:10.19666/j.rlfd.202505125

欢迎来到能源电力期刊网！

English Version 期刊登录

您当前的位置：

首页 >

文章列表页 >

融合机理模型和参数辨识的锅炉主蒸汽温度建模方法

热能科学研究 | 更新时间：2026-06-12

- 融合机理模型和参数辨识的锅炉主蒸汽温度建模方法
- 融合机理模型和参数辨识的锅炉主蒸汽温度建模方法
- 热力发电 2026年55卷第3期页码：36-43
- 作者机构：
  
  1. 浙江大学NGICS大平台
  2. 中国电力科学研究院有限公司
- 作者简介：
- 基金信息：
  
  中央高校基本科研业务费专项资金（2025ZFJH02）~~
- DOI：10.19666/j.rlfd.202505125
  中图分类号： TM621.2
- 纸质出版：2026
- 稿件说明：
移动端阅览
[1]李俊杰,张奕楠,杨雨,等.融合机理模型和参数辨识的锅炉主蒸汽温度建模方法[J].热力发电,2026,55(03):36-43.
[1]李俊杰,张奕楠,杨雨,等.融合机理模型和参数辨识的锅炉主蒸汽温度建模方法[J].热力发电,2026,55(03):36-43. DOI： 10.19666/j.rlfd.202505125.

DOI：10.19666/j.rlfd.202505125.

摘要

主蒸汽温度的准确建模是研究其控制策略的基础。针对传统建模方法机理完整性和模型实用性的矛盾，提出了一种融合机理模型和参数辨识的主蒸汽温度建模方法。基于集总参数法建立了包含烟气传热量、蒸汽流量、减温水流量的主蒸汽温度机理模型，基于热电厂锅炉闭环运行数据，采用差分进化算法完成了模型参数辨识。和锅炉设计值对比，辨识结果的灰渣热阻增大、烟气对流传热系数减小，符合物理规律。采用不同时间段的运行数据验证模型，结果表明，模型计算结果与运行数据之间的平均绝对误差小于1℃，证明了模型的准确性。利用模型进一步分析了主蒸汽温度动态特性，提出了增加给煤量、减温器入口蒸汽温度前馈信号和采用基于负荷的模糊控制器的改进控制策略，并基于模型进行了仿真验证。仿真结果表明，主蒸汽温度控制偏差减小，证明了所建模型对主蒸汽温度控制系统优化具有指导作用。

Abstract

Accurate modeling of main-steam temperature is the foundation for studying its control strategy. To address the contradiction between mechanism completeness and model practicality of the conventional modeling methods

a hybrid modeling method for main steam temperature integrating mechanism model and system identification was proposed. A mechanistic model of main steam temperature was established based on the lumped parameter method. The model includes the effects of flue gas heat transfer

steam flow rate and desuperheating water flow rate. According to the closed-loop operation data of a thermal power plant boiler

the model parameters were identified using differential evolution algorithm. Compared with the boiler design values

the identification results show an increase in thermal resistance of ash layer and a decrease in convective heat transfer coefficient of flue gas

which conforms to physical laws. The model was then verified using operational data from different time periods. The results indicate that the mean absolute error between the calculated results and the operational data is less than 1 ℃

which proves the accuracy of the model. By utilizing the model

the dynamic characteristics of the main-steam temperature were further analyzed

and several improved control strategies were proposed

such as increasing the feedforward signals of the coal feeding rate and the attemperator inlet steam temperature

and adopting a load-based fuzzy controller. The simulation results show that the deviation of the main-steam temperature is reduced

which proves the established model has guidance effect on optimizing the main-steam temperature control system.

关键词

Keywords

references

李松山,唐文,宁新宇,等.基于流动网络法水动力模型优化超临界600 MW对冲锅炉两侧主蒸汽温度偏差研究[J].热力发电, 2023, 52(1):74-82.LI Songshan, TANG Wen, NING Xinyu, et al.Optimization of main steam temperature deviation on both sides of supercritical 600 MW opposed firing boiler based on hydrodynamic model of flow network method[J].Thermal Power Generation, 2023, 52(1):74-82.

杜志龙.超临界CFB机组主蒸汽温度系统建模与控制优化[D].太原:山西大学, 2024:3-5.DU Zhilong. Modelling and control optimization of main steam temperature system for supercritical CFB unit[D].Taiyuan:Shanxi University, 2024:3-5.

杨春来,袁晓磊,殷喆,等.考虑时延特性优化的燃煤锅炉主蒸汽温度预测模型[J].热力发电, 2022, 51(8):124-129.YANG Chunlai, YUAN Xiaolei, YIN Zhe, et al.Prediction model of main steam temperature of coal-fired boiler considering time delay characteristic optimization[J]. Thermal Power Generation, 2022, 51(8):124-129.

李峰,郑天,宋伟.基于Hammerstein模型的风力发电系统建模与辨识[J].系统仿真学报, 2023, 35(7):1517-1525.LI Feng, ZHENG Tian, SONG Wei. Modeling and identification of wind power generation system based on Hammerstein model[J]. Journal of System Simulation,2023, 35(7):1517-1525.

金东昊,刘欣,张效源,等.燃煤锅炉屏式过热器壁温耦合计算方法[J].中国电机工程学报, 2022, 42(24):8951-8961.JIN Donghao, LIU Xin, ZHANG Xiaoyuan, et al. A coupled model for predicting the tube temperature of platen superheater of coal-fired boiler[J]. Proceedings of the CSEE, 2022, 42(24):8951-8961.

曹振乾,印江,张津华.基于改进粒子群算法的主蒸汽温度系统辨识[J].系统仿真学报, 2021, 33(10):2411-2419.CAO Zhenqian, YIN Jiang, ZHANG Jinhua.Identification of main steam temperature system based on improved particle swarm optimization[J]. Journal of System Simulation, 2021, 33(10):2411-2419.

WANG D, YUAN S. Identification of LPV model for superheated steam temperature system using A-QPSO[J].Simulation Modelling Practice and Theory, 2016, 69:1-13.

沈赫男,张凤南,吕正鑫.基于现场数据的主汽温系统模型辨识[J].计算机仿真, 2018, 35(6):101-105.SHEN Henan, ZHANG Fengnan, LYU Zhengxin.Identification of main steam temperature system model based on field data[J]. Computer Simulation, 2018, 35(6):101-105.

王欢,饶政华,廖胜明.基于数据驱动的过热蒸汽温度系统模型辨识[J].中南大学学报(自然科学版),2019, 50(8):2001-2008.WANG Huan, RAO Zhenghua, LIAO Shengming. System model identification of superheated steam temperature based on particle swarm optimization[J]. Journal of Central South University(Science and Technology), 2019,50(8):2001-2008.

FAN H, SU Z G, WANG P H, et al. A dynamic mathematical model for once-through boiler-turbine units with superheated steam temperature[J]. Applied Thermal Engineering, 2020, 170:114912.

王超,张宝瑞,刘铠瑞,等.超临界660 MW机组直流锅炉动态特性仿真研究[J].热力发电, 2024, 53(1):124-133.WANG Chao, ZHANG Baorui, LIU Kairui, et al.Simulation on dynamic characteristics of a supercritical660 MW once-through boiler[J]. Thermal Power Generation, 2024, 53(1):124-133.

吕崇德,任挺进,姜学智,等.大型火电机组系统仿真与建模[M].北京:清华大学出版社, 2002:145-150.LYU Chongde, REN Tingjin, JIANG Xuezhi, et al.Simulation and modeling of large thermal power unit systems[M]. Beijing:Tsinghua University Press, 2002:145-150.

KIM C, KIM H, MUN K. Use of the international association for the properties of water and steam(IAPWS)formulations, IAPWS-95&IAPWS-IF97:making of mollier diagram and T-S diagram of water and steam[J].Thermal Science and Engineering Progress, 2020, 20:100691.

ZHANG Y, WANG W, YANG Q, et al. Promoting digital twin technology application for process industry:a novel generation modelling platform and its implementations[J]. Digital Twins and Applications, 2024, 1(1):51-74.

李劲松,董泽,马宁.一种滑动窗口检验的稳态检测方法[J].计算机仿真, 2021, 38(10):116-119.LI Jinsong, DONG Ze, MA Ning. A steady state detection method of sliding window test[J]. Computer Simulation,2021, 38(10):116-119.

李敏花,柏猛.基于差分进化算法的二阶时滞系统参数辨识[J].自动化仪表, 2023, 44(12):16-20.LI Minhua, BAI Meng. Parameter identification of second-order time-lag system based on differential evolutionary algorithm[J]. Process Automation Instrumentation, 2023, 44(12):16-20.

韩程浩,杜鸣,牛玉广,等.超临界直流炉机组建模及模型复杂方程优化[J].热力发电, 2025, 54(1):88-98.HAN Chenghao, DU Ming, NIU Yuguang, et al. Modeling of supercritical once-through boiler unit with complex equations optimization[J]. Thermal Power Generation,2025, 54(1):88-98.

HOU G, GONG L, WANG M, et al. A novel linear active disturbance rejection controller for main steam temperature control based on the simultaneous heat transfer search[J]. ISA Transactions, 2022, 122:357-370.

宋美艳,赵亮,王宾,等.基于改进等价输入干扰观测器的主蒸汽温度系统阶梯式动态矩阵控制[J].热力发电, 2023, 52(4):113-120.SONG Meiyan, ZHAO Liang, WANG Bin, et al. Stair-like dynamic matrix control for main steam temperature system based on improved equivalent input disturbance observer[J]. Thermal Power Generation, 2023, 52(4):113-120.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

耦合热泵的热电联产机组机理模型研究

660 MW超超临界二次再热尾部三烟道燃煤锅炉动态特性

125MW机组调速系统动态特性改善措施探讨

采用序贯模块法建立余热锅炉动态模型研究

300MW机组直流锅炉数学模型及动态特性