Based on the dynamic vibration absorber method

analysis on abnormal vibration of vertical condensate pump motor and vibration reduction measures are carried out. According to the vibration characteristics of the condensate pump motor

the design method of power vibration absorption is studied theoretically

and the power vibration absorber is developed and designed and applied to the actual unit. The results show that

the dynamic balancing method has certain limitations in alleviating the vibration exceedance of the condensate pump motor during varying frequency operation

and cannot reduce the vibration amplitude of the condensate pump motor in both directions at the same time. The mass participating in the vibration of the condensate pump system shows a growing change with the increasing additional mass

and the first-order vibration mass at the top of the condensate pump motor is about 6 000 kg(X direction) and 7 000 kg(Y direction). With mass ratio of 2%

5% and 10%

the maximum vibration amplitude in X direction is reduced by 80%

83% and 86%

and the maximum vibration amplitude in Y direction is reduced by 68%

77% and 83%. The dynamic vibration absorber device effectively reduces the vibration in both directions

and the actual reduction of vibration in X and Y directions is about 53% and 66% during the whole frequency operation period. The vibration control method based on the dynamic vibration absorber of the condensate pump motor has an excellent vibration reduction effect.