HE Honghao, LI Wenjun, XU Zhong, et al. Application of sludge co-incineration technology in coal fired power plant[J]. Thermal power generation, 2020, 49(3): 137-140.
HE Honghao, LI Wenjun, XU Zhong, et al. Application of sludge co-incineration technology in coal fired power plant[J]. Thermal power generation, 2020, 49(3): 137-140. DOI: 10.19666/j.rlfd.201908218.
火力发电厂污泥掺烧技术应用
摘要
利用火力发电厂掺烧的方式处置城市污泥是目前公认最具前景的途径。为了考察掺烧污泥时锅炉的燃烧稳定性
本文以2台300 MW容量等级、亚临界蒸汽参数、四角切圆燃烧方式的煤粉炉为试验对象
进行污泥掺烧试验
分别在不同负荷和不同掺烧比例的条件下
对比了炉膛温度、锅炉效率和NOx质量浓度的变化。试验结果显示:随着掺烧污泥比例的增加
炉膛温度下降
NOx质量浓度有所增加;在10%的掺烧比例范围内
锅炉效率无明显变化。本文研究结果可为电厂污泥掺烧技术的发展提供借鉴。
Abstract
At present
it is recognized as the most promising way to dispose municipal sludge by co-firing it in thermal power plants. By taking two subcritical 300 MW unit coal-fired boilers with tangential firing as the research object
the co-incineration test of sludge and coal mixture was carried out
so as to investigate the variation of furnace temperature
boiler efficiency and NOx emission mass concentration under conditions with different unit loads and mixing proportions of sludge. The experimental results show that
with an increase in mixing proportion of the sludge
the furnace temperature decreased
the mass concentration of NOx emission increased
while the change of boiler efficiency was not significant as the mixing proportion of sludge is below 10%.