ANALYSIS OF VIBRATION PROBLEM FOR HOME - MADE 600 MW SUPERCRITICAL TURBO - GENERATOR SET AND TREATMENT THEREOF[J]. Thermal power generation, 2006, (7): 44-47.
ANALYSIS OF VIBRATION PROBLEM FOR HOME - MADE 600 MW SUPERCRITICAL TURBO - GENERATOR SET AND TREATMENT THEREOF[J]. Thermal power generation, 2006, (7): 44-47. DOI: 10.19666/j.rlfd.2006.07.014.
国产600MW超临界汽轮发电机组振动问题分析及处理
摘要
华能沁北发电有限责任公司2×600MW超临界机组在新机组试运行和商业运行中
表现出励磁机9号轴承轴振动大、低压Ⅱ转子轴承振动偏大等问题
严重影响机组的安全运行。通过现场轴系动平衡
使各轴承轴振动达到优良水平。对发电机定子和轴承结构共振以及2号机组低压缸膨胀不畅等问题进行了分析。
Abstract
The problems occurred in trial operation and commercial operation
such as serious shaft vibration of bearing no. 9 concerning the exciter
and somewhat large vibration of the low-pressure II rotor bearing etc. on 2×600 MW supercritical units of Huaneng Qinbei Power - Generation Co Ltd have serious influence upon safe operation of the said units. Through kinetic equilibrum of shafting system in the field
the shaft vibration of each bearing has achieved to a good level
and problems
such as generator’s stator and bearing structure resonance
as well as unsmooth expansion of lowpres-sure cyclinder for unit no. 2 etc. have been analysed.