Wenli Yang, Junpeng Ma, Ruiting Sun, 等. Control Scheme of Spread Frequency Band for High Power Impedance Measuring Converter with Chirp Signal Injection[J]. 中国电机工程学会电力与能源系统学报(英文), 2024,10(6):2411-2422.
Wenli Yang, Junpeng Ma, Ruiting Sun, et al. Control Scheme of Spread Frequency Band for High Power Impedance Measuring Converter with Chirp Signal Injection[J]. CSEE Journal of Power and Energy Systems, 2024, 10(6): 2411-2422.
Wenli Yang, Junpeng Ma, Ruiting Sun, 等. Control Scheme of Spread Frequency Band for High Power Impedance Measuring Converter with Chirp Signal Injection[J]. 中国电机工程学会电力与能源系统学报(英文), 2024,10(6):2411-2422.DOI: 10.17775/CSEEJPES.2020.05950.
Wenli Yang, Junpeng Ma, Ruiting Sun, et al. Control Scheme of Spread Frequency Band for High Power Impedance Measuring Converter with Chirp Signal Injection[J]. CSEE Journal of Power and Energy Systems, 2024, 10(6): 2411-2422.DOI: 10.17775/CSEEJPES.2020.05950.
Control Scheme of Spread Frequency Band for High Power Impedance Measuring Converter with Chirp Signal Injection
Impedance measurement is an effective solution for evaluating stability of a power system with high penetration of renewable sources. In this paper
the impedance measurement is achieved by a typical high-power impedance measuring converter (HPIM-converter) with chirp signal injection. The modulation saturation phenomenon of the HPIM-converter is revealed
and the frequency sweep boundary is analyzed in detail. To expand the rated frequency range of the HPIM-converter
a spread frequency band control scheme based on an over-modulation technique is proposed in this paper. The proposed control method enlarges the rated frequency band and can inject a disturbance voltage into the system under test with consistent amplitude in the rated frequency band. Also
a smooth transition strategy between linear modulation mode and over-modulation mode is proposed for suppressing signal fluctuation. Finally
the effectiveness of the proposed method is verified by simulation tests.