Xianghua Peng, Honggeng Yang. Impedance-based Stability Criterion for the Stable Evaluation of Grid-connected Inverter Systems with Distributed Parameter Lines[J]. 中国电机工程学会电力与能源系统学报(英文), 2023,9(1):145-157.
Xianghua Peng, Honggeng Yang. Impedance-based Stability Criterion for the Stable Evaluation of Grid-connected Inverter Systems with Distributed Parameter Lines[J]. CSEE Journal of Power and Energy Systems, 2023, 9(1): 145-157.
Xianghua Peng, Honggeng Yang. Impedance-based Stability Criterion for the Stable Evaluation of Grid-connected Inverter Systems with Distributed Parameter Lines[J]. 中国电机工程学会电力与能源系统学报(英文), 2023,9(1):145-157.DOI: 10.17775/CSEEJPES.2019.02250.
Xianghua Peng, Honggeng Yang. Impedance-based Stability Criterion for the Stable Evaluation of Grid-connected Inverter Systems with Distributed Parameter Lines[J]. CSEE Journal of Power and Energy Systems, 2023, 9(1): 145-157.DOI: 10.17775/CSEEJPES.2019.02250.
Impedance-based Stability Criterion for the Stable Evaluation of Grid-connected Inverter Systems with Distributed Parameter Lines
the stability of the point of common coupling (PCC) voltage is evaluated considering the distribution parameters of the transmission lines. First
the systems on both sides of the PCC are equalized
a small-signal equivalent circuit similar to the “current source-grid” is established
and a mathematical model for the voltage of the PCC is derived. Then
using Euler's formula and Nyquist stability criterion
the PCC voltage stability of the grid-connected system is evaluated by the impedance analysis method under the premise that the single-side excitation is stable. In addition
the grid-connected conditions causing PCC voltage instability are studied. A phase compensation method based on an impedance phase compensation control strategy is introduced. The stability of the grid-connected system is improved by compensating the phase margin at the equivalent impedance crossover-section frequency on both sides of the grid-connected system PCC. Finally
a simulation circuit is built to simulate and analyze the proposed model and phase compensation method. The simulation results verify the accuracy and effectiveness of the theoretical analysis.