In rock-lined caverns with compressed air energy storage (CAES)

the hoop tensile strength of rock is an important parameter for calculating the ultimate bearing capacity and long-term stability of the cavern. The existing methods for measuring the tensile strength of rock are direct tensile tests or indirect tensile tests

such as Brazilian splitting and point load bending tests

which cannot truly reflect the circumferential stress of rock under high internal air pressure. Based on this

a new measurement method is proposed. By injecting high-pressure air into the drilled rock sample

the rock burst pressure is obtained. Then a calculation formula for the rock tensile strength is proposed considering the rock pore stress. In the experiments

the inflation rate and the temperature are changed

and it is found that the rock burst pressure is negatively correlated with the inflation rate and positively correlated with the temperature. It is found that when the number of cycles is relatively small (n≤100)

the rock burst pressure is positively correlated with the number of cycles. The results can guide the design and calculation of rock-lined caverns for CAES

which is conducive to the promotion and application of CAES technology and has important engineering application value.