SU Yong-hua, YANG Zhong-wu, YUE Shao, et al. Fracture evaluation criteria based on static directional cracking of rocks with quadrilateral holes[J]. 2025, 46(3): 695-705.
SU Yong-hua, YANG Zhong-wu, YUE Shao, et al. Fracture evaluation criteria based on static directional cracking of rocks with quadrilateral holes[J]. 2025, 46(3): 695-705.DOI: 10.16285/j.rsm.2024.0595.
The application of static expansion rock fracturing technology has shown that drilling holes with sharp corners significantly enhances the fracturing effect due to the pronounced stress concentration effect. Therefore
it is of great significance to study the directional fracturing mechanism of static rock fracturing using quadrilateral holes with multiple sharp corners and to propose criteria for quantitatively analyzing the fracturing effectiveness. To this end
soft rock specimens with varying fractured rock areas
numbers
and shapes of drill holes were designed to conduct static expansion tests. The fracture processes and dynamic fracture mechanics behaviors of the specimens were monitored and analyzed using particle image velocimetry (PIV) technology and strain rosettes. Secondly
to quantitatively assess the fracturing effectiveness of the specimens
dimensionless parameters such as the average energy utilization rate
fracture time efficiency ratio
stress ratio
and fracture area ratio coefficient were introduced. The fracture coefficient was proposed as a comprehensive evaluation criterion. The results indicate that each specimen developed two main cracks along the angular bisectors of the quadrilateral’s sharp corners. As the cracks propagated
the peak stress and total energy decreased sequentially
while the fracture time lagged. For single-hole fracturing
the stress concentration effect of trapezoidal holes was 13.75% higher than that of rhombic holes
resulting in a better fracturing effect. For dual-hole interaction fracturing
the stress concentration effect of rhombic holes was 16.67% higher than that of trapezoidal holes
and the stress decay was slower. Among the combinations
the square-rhombic hole configuration had the highest average energy utilization rate at 62.66%. The fracturing effectiveness of the rhombic-trapezoidal hole combination was not significantly improved
with a fracture coefficient only 6.67% higher than that of a single trapezoidal hole. The square-trapezoidal hole combination exhibited the best fracturing effect