ZHANG Shan-kai, LENG Xian-lun, SHENG Qian, et al. Swelling and shrinkage characteristics study of Lushi
expansive rock under dry and wet circulation[J]. 2019, 40(11): 4279-4288.
ZHANG Shan-kai, LENG Xian-lun, SHENG Qian, et al. Swelling and shrinkage characteristics study of Lushi
expansive rock under dry and wet circulation[J]. 2019, 40(11): 4279-4288.DOI: 10.16285/j.rsm.2018.1752.
To investigate the expansion and shrinkage characteristics of the Lushi expansion rock
experimental study on the expansive rock expansion and contraction characteristics under dry-wet cycle was carried out. After experiencing dry and wet cycles
the expansive rock was analyzed by scanning electron microscopy (SEM) and nitrogen adsorption experiment (NA). The phenomenon of swelling and water shrinkage of expansive rock was analyzed from the microscopic point of view
and the reason for the change of expansion and contraction characteristics was explained. The results show that the expansion rate of expansive rock increases with the increase of dry and wet circulation
and the absolute expansion rate increases by 25%. The contraction curve shows an evident contraction inflection point
which usually occurs at 20% of the total shrinkage time. At this time
the water loss state of the expansion rock changes from the free water loss to the combined water loss. Cracks appear during the first expansion and contraction of the expansive rock
which are transfixion. In the later expansion and contraction process
the cracks appeared shallower gradually stabilized with the increase of dry and wet circulation. After the number of cycles reached 6-8
the expansion and shrinkage rate of Lushi expansion rock reached a stable value
with the absolute expansion rate stable at 17% and the absolute contraction rate stable at 9%. As the number of dry and wet cycles increased
the aggregation of clay particles in the microstructure of expansive rock changed from compact state to loosen. In addition
the pore characteristics of the sample show that total pore volume gradually increases
the pore diameter gradually decreases
and the specific surface area gradually increases with the increase of the number of dry and wet cycles.