PEI Qiang-qiang, WANG Xu-dong, GUO Qing-lin, et al. Laboratory test of deformation mechanism of rammed roof-propping reinforcement at earthen heritage sites in arid environment[J]. 2018, 39(8): 2755-2764.
PEI Qiang-qiang, WANG Xu-dong, GUO Qing-lin, et al. Laboratory test of deformation mechanism of rammed roof-propping reinforcement at earthen heritage sites in arid environment[J]. 2018, 39(8): 2755-2764.DOI: 10.16285/j.rsm.2016.2411.
Under the influence of natural forces and human activities
earthen heritage sites in arid and semi-arid regions like Great Wall
Jiaohe Ruinsy
Beiting Ruins were hanged in the air largely by sapping at the base of the wall even causing partial collapse. In this study
rammed heritage sites with serious basal sapping were consolidated by rammed roof-propping
which conformed with basic conservation principles of cultural heritage sites protection and followed the requirement to conserve original material and technology
and also had good reinforcement effect. However
large-sized rammed roof-propping body produced big crack in 1-3 mm width from the original wall under the effect of consolidation and dehydration. Control and reduction of shrinking cracks between roof-propping body and original wall were the key to realize reliability and effectiveness of large-sized ramming repair. Based on the theory of consolidation and dehydration
this study conducted consolidation test with different density and gradation samples indoor
and collected the data of dehydration shrinkage of samples with different shapes. This study made a comparative analysis of the regulation of consolidation deformation and dehydration deformation in the condition of different densities and different clay particle gradations
and analyzed threshold value of consolidation and dehydration deformation for roof-propping body
according to traditional rammed technology and laboratory empirical formula. The empirical formula to control large-sized vertical deformation was preliminarily proposed
which can provide theoretical references for controlling shrinkage settlement of large-sized rammed roof-propping body.