岳晓明,王为术,朱晓静.印刷电路板式换热器超临界二氧化碳传热特性分析[J].能源研究与管理,2022(01).

张旭,邹先平.基于能量准则的板翅式换热器封头安定性研究[J].机械设计与制造,2021(11).

徐攀,文键,厉彦忠,王斯民,屠基元.氢正仲转化耦合流动换热板翅式换热器研究[J].西安交通大学学报,2021(12).

来振,郭朋彦,张瑞珠,杨奥雷.锯齿形和波纹形板翅式换热器研究现状[J].汽车实用技术,2020(24).

胡万玲,姜林秀,张程,王丽,管勇,王良璧.析湿工况下翅片材质对管翅式换热器性能影响的实验研究[J].工程热物理学报,2019(07).

文巧,孙月菊,王颖,江乐新.M型内齿对平行流管换热性能影响的仿真研究[J].能源研究与管理,2017(04).

谢少卿.5m~3液氮过冷器的设计[J].能源研究与管理,2017(03).

刘景成,张树有,周智勇.一种新型仿生翅片及其对流体流动与传热影响[J].机械工程学报,2015(12).

杨凯,张红光,宋松松,贝晨,常莹,王宏进.车用柴油机-有机朗肯循环联合系统的设计及分析[J].内燃机工程,2016(03).

侯雨田.板翅式换热器翅片通道流场的数值模拟及结构改进[D].陕西科技大学,2019(09).

蔡宇宏.板翅式换热器热力学特性的数值模拟和试验研究[D].南京航空航天大学,2009(02).

Wen Jian,Li Chaolong,Hao Hongwei,Zhao Xin,Lei Gang,Wang Simin,Li Yanzhong.Numerical investigation on fin configuration improvement of 2 K sub-atmospheric plate-fin heat exchangers for the superfluid helium cryogenic systems[J].Applied Thermal Engineering,2021.

Li Yao,Si Haiqing,Qiu Jingxuan,Shen Yingying,Zhang Peihong,Jia Hongyin.CFD-based structure optimization of plate bundle in plate-fin heat exchanger considering flow and heat transfer performance[J].International Journal of Chemical Reactor Engineering,2021.

Hao Peng,Xiang Ling.Analysis of heat transfer and flow characteristics over serrated fins with different flow directions[J].Energy Conversion and Management,2010.

Nathan R. Rosaguti,David F. Fletcher,Brian S. Haynes.Low-Reynolds number heat transfer enhancement in sinusoidal channels[J].Chemical Engineering Science,2006.