张柳, 席细平. Experimental Research on Heat Transfer Process of Graphite/Epoxy Composite Coating in Radiator[J]. 2019, (1): 21-24. DOI: 10.16056/j.1005-7676.2019.01.006.
石墨烯/环氧树脂复合涂层在散热器传热过程的实验研究
摘要
提出一种用于空气源热泵-散热器系统的涂层材料
即石墨烯复合涂料。受空气源热泵热水机组出水温度的限制
需提高散热器的散热能力。主要通过实验分析
分别制备石墨烯质量分数为0%、2.5%、5%的样品
比较喷涂前后散热器散热能力的大小。结果表明:石墨烯质量分数为5%的复合涂层的散热器散热效果最好
供水温度为50℃时
散热量约为纯环氧树脂的13倍;随着供水温度的升高
样品的散热量增加
但增加的幅度逐渐减小。
Abstract
A new coating material which is graphene composite coatings is proposed for air source heat pump-radiator system.Limited by the outlet water temperature of air source heat pump water heater
it is necessary to improve the heat dissipation capacity of the radiator. The samples with 0%
2.5% and 5% graphene mass fraction were prepared and the radiator heat dissipation capacity before and after spraying was compared. The results show that the heat dissipation effect of the composite coating with 5% graphene is the best. The heat dissipation of the composite coating is about 13 times of pure epoxy resin when the water supply temperature is 50 ℃. With the increase of the water supply temperature