进气管结构对天然气发动机废气再循环率均匀性的影响

施东晓; 郭立新; 李康宁; 姚春德; 杨海涛

doi:10.13949/j.cnki.nrjgc.2020.03.006

欢迎来到能源电力期刊网！

您当前的位置：

首页 >

文章列表页 >

进气管结构对天然气发动机废气再循环率均匀性的影响

更新时间：2026-04-16

- 进气管结构对天然气发动机废气再循环率均匀性的影响
- Effect of Intake Pipe Structure on Exhaust Gas Recirculation Uniformity of Natural Gas Engine
- 内燃机工程 2020年41卷第3期页码：42-48
- 作者机构：
  
  1. 中国第一汽车股份有限公司无锡油泵油嘴研究所,无锡,214063
  2. 天津大学内燃机燃烧学国家重点实验室,天津,300072
- 作者简介：
- 基金信息：
- DOI：10.13949/j.cnki.nrjgc.2020.03.006
  中图分类号：
- 纸质出版：2020
- 稿件说明：
移动端阅览
施东晓，郭立新，李康宁，姚春德，杨海涛.进气管结构对天然气发动机废气再循环率均匀性的影响[J].内燃机工程,2020,41(3):42-48.

施东晓, 郭立新, 李康宁, et al. Effect of Intake Pipe Structure on Exhaust Gas Recirculation Uniformity of Natural Gas Engine[J]. 2020, 41(3): 42-48.
施东晓，郭立新，李康宁，姚春德，杨海涛.进气管结构对天然气发动机废气再循环率均匀性的影响[J].内燃机工程,2020,41(3):42-48. DOI： 10.13949/j.cnki.nrjgc.2020.03.006.

施东晓, 郭立新, 李康宁, et al. Effect of Intake Pipe Structure on Exhaust Gas Recirculation Uniformity of Natural Gas Engine[J]. 2020, 41(3): 42-48. DOI： 10.13949/j.cnki.nrjgc.2020.03.006.

摘要

针对某国Ⅵ天然气发动机各缸燃烧一致性差异过大的问题，利用计算流体力学（CFD）软件STAR-CCM+对该发动机的进气管路开展废气再循环（exhaust gas recirculation， EGR）率均匀性分析，发现第1缸~第3缸的EGR率高于第4缸~第6缸，1200r/min全负荷工况EGR率相对偏差为-29.9%~34.2%。分析表明，EGR的引出方式为第1缸~第3缸单侧取气，导致EGR进气入口存在较大波动，是造成各缸EGR率分配不均的主要原因。从降低管路内EGR废气波动的角度提出了两种进气管路优化方案，使EGR废气在进入稳压腔之前得到了充分混合，各缸EGR率均匀性得到明显提高，EGR率相对偏差在±5%以内。

Abstract

In order to solve the issue of excessive difference in combustion consistence among the cylinders of a China Ⅵ natural gas engine

an analysis of the exhaust gas recirculation(EGR) rate uniformity of the intake system was carried out by a computational fluid dynamics(CFD) software called STAR-CCM+. It was found that the EGR rates of from No.1 to No.3 cylinders were larger than those of from No.4 to No.6 cylinders

and the relative deviation of EGR rate at 1200r/min with full load was from -29.9% to 34.2%. The analysis showed that there was a large fluctuation at the EGR inlet due to EGR being extracted only from No.1 to No.3 cylinders

which mainly caused the uneven distribution of EGR rate among the cylinders. Two optimizations of intake pipe were put forward to reduce the fluctuation of EGR in the intake pipe. By using the two kinds of optimized intake pipe

the recirculated exhaust is fully mixed before entering the intake manifold

which improves the uniformity of EGR rate in each cylinder obviously and brings the relative deviation of EGR rate to within ±5%.

关键词

Keywords

references

浏览量

674

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

暂无数据