1. 中国石油大学(北京)油气资源与探测国家重点实验室,北京 102249中国石油大学(北京)煤层气研究中心,北京,102249
2. 中国石油大学(北京)煤层气研究中心,北京 102249煤与煤层气共采国家重点实验室,山西,晋城,048012
3. 煤与煤层气共采国家重点实验室,山西,晋城,048012
[ "石军太(1984—),男,博士,副教授,主要从事复杂气藏和非常规气藏渗流机理、产能预测、开发技术等方面的教学与科研工作。地址:北京市昌平区府学路18号,邮政编码:102249。E-mail: shijuntai@cup.edu.cn" ]
纸质出版:2022
移动端阅览
石军太, 李文斌, 张龙龙, 等. 压裂过程数据对原始煤储层压力反演方法研究[J]. 油气藏评价与开发, 2022,(4):564-571.
SHI Juntai, LI Wenbin, ZHANG Longlong, et al. An inversion method of initial coal reservoir pressure using fracturing process data[J]. Petroleum Reservoir Evaluation and Development, 2022, (4): 564-571.
石军太, 李文斌, 张龙龙, 等. 压裂过程数据对原始煤储层压力反演方法研究[J]. 油气藏评价与开发, 2022,(4):564-571. DOI: 10.13809/j.cnki.cn32-1825/te.2022.04.003.
SHI Juntai, LI Wenbin, ZHANG Longlong, et al. An inversion method of initial coal reservoir pressure using fracturing process data[J]. Petroleum Reservoir Evaluation and Development, 2022, (4): 564-571. DOI: 10.13809/j.cnki.cn32-1825/te.2022.04.003.
原始煤储层压力是煤层气储量和产能评价中一个非常重要的参数,对煤层气开采具有指导作用,准确计算原始煤储层压力具有重大意义。因此,基于渗流力学理论压力势叠加原理,建立了压裂过程中和压裂后关井过程中压力势模型,并分忽略与考虑煤储层压裂过程中和压裂后裂缝网络渗透率变化两种情况,提出了利用水力压裂煤层气井关井阶段井口压力降落数据反演原始煤储层压力的方法,并进行了实例应用。从实例井拟合结果可以看出,忽略与考虑煤储层裂缝网络渗透率变化的原始地层压力方法线性关系都很明显,说明建立的方法有效。从解释精度的角度来看,考虑煤储层压裂后裂缝网络渗透率变化的方法参与拟合的数据点更多,且压裂过程和压裂后煤储层裂缝网络渗透率变化是不争的事实,解释结果更加可靠。如果忽略压后关井期间煤层裂缝网络渗透率的变化过程,评价的裂缝网络稳定的渗透率及原始煤储层压力会偏高。该方法在确定原始煤储层压力的同时,还可以确定煤储层压裂后裂缝网络稳定的渗透率并评价裂缝网络渗透率变化趋势,为煤层气藏类型划分、煤层气储量计算、压裂效果评价和排采制度优化设计提供依据。
The initial formation pressure of coalbed methane(CBM) reservoir is a key parameter used for the evaluation of CBM reserves and productivity
which plays a guiding role in CBM production. Therefore
it is of great significance to accurately calculate the initial reservoir pressure of CBM reservoir. Based on the pressure potential superposition principle of the seepage mechanics theory
the pressure potential model in the process of fracturing and shut in after fracturing is established
and a method for determining the initial reservoir pressure of CBM reservoir is proposed by using the wellhead pressure drop data in the shut-in stage of hydraulically fractured gas well under two conditions: ignoring or considering the fracture network permeability change in the process of fracturing and shut in after fracturing. And then
a field application is carried out. From the fitting results of the case study
it can be seen that the linear relationships for both methods are obvious
indicating that the established methods are effective. From the perspective of interpretation accuracy
the method of considering the fracture network permeability change after fracturing involves more data points in fitting
and the fracture network permeability change during fracturing and after fracturing is an indisputable fact
so the interpretation result by using the method considering the fracture network permeability change is more reliable. If the change process of fracture network permeability of coal formation during shut in after fracturing is ignored
the interpreted stable permeability of fracture network and initial reservoir pressure will be high. Since this method can not only be used to determine the initial reservoir pressure
but also to determine the stable permeability of fracture network after fracturing and evaluate the change trend of fracture network permeability
it provides a basis for the classification of CBM reservoir types
CBM reserve calculation
fracturing effect evaluation
and optimization design of drainage and production system.
0
浏览量
19
下载量
0
CSCD
关联资源
相关文章
相关作者
相关机构
京公网安备11010802024621