ZHANG Shuwen, GUO Chunyi, ZHAO Wei, et al. Research on the Power Transmission Capability of PV-hydro Complementary MMC-HVDC Transmission Systems[J]. 2025, (21): 8378-8389.
ZHANG Shuwen, GUO Chunyi, ZHAO Wei, et al. Research on the Power Transmission Capability of PV-hydro Complementary MMC-HVDC Transmission Systems[J]. 2025, (21): 8378-8389. DOI: 10.13334/j.0258-8013.pcsee.241045.
In the PV-hydro complementary modular multilevel converter-based high voltage direct current (MMC-HVDC) transmission system
the share of hydropower output under weak grid conditions affects the transmission capacity of the DC power. Integrating grid-forming renewable energy sources can improve adaptability to weak grids
but the impact of grid-forming inverters on the power transmission capacity of the system remains uncertain. Therefore
this paper first establishes the steady-state mathematical model and the small-signal model for the photovoltaic power stationwith grid-following and grid-forming heterogeneous inverters and the hydropower complementary MMC-HVDC transmission system. Then
taking into account both the steady-state electrical parameters
such as system operational limits and busbar voltage
and the small-signal stability
a calculation method for the power transmission capacity of the HVDC transmission system is proposed. Furthermore
the DC power transmission capacity is quantitatively evaluated under different PV-hydro ratios in a fully grid-following photovoltaic scenario
so that the boundary conditions for configuring grid-forming inverters are obtained. The mechanism underlying the limited power transmission capacity of the system under low hydropower output share is further analyzed through root trajectories and participation factor analyses. Subsequently
within the boundary conditions
the feasible proportion range of grid-forming photovoltaic to maintain the rated DC transmission power under low hydropower share is quantified. The maximum transmission power of the MMC-HVDC under different grid-forming photovoltaic outputs is determined
and the key influencing factors limiting DC transmission capacity are analyzed. Finally
the effectiveness of the proposed calculation method is validated on the PSCAD/EMTDC platform.