620℃超超临界二次再热机组用S31042钢力学性能及组织演化

李江; 唐丽英; 李季; 周荣灿; 陈志; 王博涵; 侯淑芳

doi:10.13334/j.0258-8013.pcsee.200347

欢迎来到能源电力期刊网！

English Version 读者登录期刊登录

您当前的位置：

首页 >

文章列表页 >

620℃超超临界二次再热机组用S31042钢力学性能及组织演化

发电 | 更新时间：2025-07-03

- 620℃超超临界二次再热机组用S31042钢力学性能及组织演化
- 暂无标题
- 中国电机工程学报 2020年第17期页码：5583-5591
- 作者机构：
  
  1. 西安热工研究院有限公司
  2. 华能安源发电有限责任公司
- 作者简介：
- 基金信息：
  
  中国华能集团公司总部科技项目(HNKJ15-H03)~~
- DOI：10.13334/j.0258-8013.pcsee.200347
  中图分类号： TM621
- 纸质出版：2020
- 稿件说明：
移动端阅览
李江, 唐丽英, 李季, 等. 620℃超超临界二次再热机组用S31042钢力学性能及组织演化[J]. 中国电机工程学报, 2020,(17):5583-5591.
李江, 唐丽英, 李季, 等. 620℃超超临界二次再热机组用S31042钢力学性能及组织演化[J]. 中国电机工程学报, 2020,(17):5583-5591. DOI： 10.13334/j.0258-8013.pcsee.200347.

DOI：

摘要

为评估S31042钢在620℃超超临界二次再热机组中的适用性

研究了华能安源电厂600℃/620℃/620℃超超临界二次再热机组高压高再S31042锅炉管在服役17367h过程中力学性能、断口形貌特征及微观组织演变。结果表明:服役后S31042钢力学性能良好

且随服役时间延长

室温屈服强度、650℃屈服强度、布氏硬度均呈上升趋势

与备品管相比服役17367h后各项指标分别上升25.5%、46.3%和20.46%。冲击韧性在服役初期迅速下降

之后趋于稳定。服役后显微组织未见明显老化

S31042的析出相包括固溶处理未溶解的一次MX相、一次Z相和新析出的M

型碳化物、二次Z相

服役后主要强化相为M23C6和二次Z相

M23C6主要分布于晶界及晶界附近晶内

Z相主要分布在晶内

服役17367h后

晶界M23C6长大至400～650 nm

细小的Z相均匀分布于晶内

并未发现σ相析出

讨论了微观组织演变对力学性能变化的影响。综上所述

S31042钢可满足620℃超超临界二次再热机组高压高再力学性能及微观组织的相关要求。

Abstract

The applicability of S31042 austenitic boiler tubes in the 620℃ double reheat ultra-supercritical（USC） power plant was evaluated. The mechanical properties

fracture characteristics and the microstructure evolution of S31042 steel were investigated after served for different time（0

3191

6219

14167

17367 h） in a 600℃/620℃/620℃ double reheat USC unit of Huaneng Anyuan power plant. Results indicated that the mechanical properties of S31042 steel were excellent after service. The room temperature yield strength

650℃ yield strength and Brinell hardness of the S31042 steel all increased with the extension of the service time. After served for 17367 h

each index increased by 25.5%

46.3% and 20.46% re

spectively. The impact toughness decreased rapidly at the beginning of the service

and then tended to be stable. Obvious aging was not observed in the microstructures after service. The precipitates of S31042 included primary MX

primary Z-phase

new M

carbides and secondary Z-phase. After service

the main strengthening phases were M

carbides and secondary Z-phase

the M

carbides were mainly distributed along the grain boundaries or nearby

the secondary Z-phases distributed in the matrix. After exposed for 17367 h

the grain boundary M

carbides grew to 400～650 nm. No σ phase has been found. The relationship between the microstructure evolution and mechanical properties was also discussed. In summary

the S31042 boiler tubes can meet mechanical and microstructural requirements of the 620℃ double reheat USC unit.

关键词

Keywords

references

王斌.S31042奥氏体耐热钢组织性能优化研究[D].东北大学,2013(03).

钟群鹏,赵子华编著.断口学[M].高等教育出版社,2006.

Zheng-Fei Hu,Zhen Zhang.Investigation the effect of precipitating characteristics on the creep behavior of HR3C austenitic steel at 650 ℃[J].Materials Science & Engineering A,2019.

Zhen Zhang,Zhengfei Hu,Haoyun Tu,Siegfried Schmauder,Gaoxiang Wu.Microstructure evolution in HR3C austenitic steel during long-term creep at 650<ce:hsp sp="0.25"/>°C[J].Materials Science & Engineering A,2017.

Bai,Pan,Chen,Liu,Wang,Zhang,Tang.Effect of high temperature aging on microstructure and mechanical properties of HR3C heat resistant steel[J].Materials Science and Technology,2014.

T. Hussain,A.U. Syed,N.J. Simms.Trends in fireside corrosion damage to superheaters in air and oxy-firing of coal/biomass[J].Fuel,2013.

Bicao Peng,Hongxiang Zhang,Jie Hong,Jiaqiang Gao,Hanqian Zhang,Jinfu Li,Qijiang Wang.The evolution of precipitates of 22Cr–25Ni–Mo–Nb–N heat-resistant austenitic steel in long-term creep[J].Materials Science & Engineering A,2010(16).

Iseda,Okada,Semba,Igarashi.Long term creep properties and microstructure of SUPER304H, TP347HFG and HR3C for A-USC boilers[J].Energy Materials,2007.

李季,唐丽英,李江,周荣灿,张周博,陈志,王博涵,侯淑芳.超超临界二次再热机组用S30432钢的力学行为及组织演化[J].中国电机工程学报,2019(22).

俞基安,刘鹤忠,吴焕琪,段立强,姚丹花,沈国平,刁保圣,孙瑜,侯新建.我国高效灵活二次再热发电机组研制及工程示范[J].中国电机工程学报,2019(S1).

李江,周荣灿,唐丽英,李季,张周博,侯淑芳,王博涵.A-USC锅炉关键部件四种候选镍基合金烟气腐蚀行为研究[J].中国电机工程学报,2018(05).

彭志方,任文,杨超,陈方玉,刘鸿国,彭芳芳,梅青松.HR3C钢运行过热器管的脆化与晶界M_(23)C_6相参量演化的关系[J].金属学报,2015(11).

WANG Jing-zhong,LIU Zheng-dong,BAO Han-sheng,CHENG Shi-chang,WANG Bin.Effect of Ageing at 700℃ on Microstructure and Mechanical Properties of S31042 Heat Resistant Steel[J].Journal of Iron and Steel Research(International),2013(04).

方园园,赵杰,李晓娜.HR3C钢高温时效过程中的析出相[J].金属学报,2010(07).

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

1000MW超超临界二次再热机组动态建模与仿真

1000MW高超超临界二次再热系统优化

加工助剂对高压电缆半导电屏蔽料性能影响研究

集成ORC与太阳能的燃煤机组碳捕集热力系统性能分析

超临界CO₂腐蚀对耐热材料力学性能影响研究进展