EN超临界循环流化床机组全负荷段深度调峰方法研究
Research on the Method of Depth Peaking at Full Load of Supercritical Circulating Fluidized Bed Unit
- 发电技术 2021年42卷第2期 页码：273-279
- 作者机构：
1.山西大学数学科学学院, 山西省 太原市 030006
2.山西河坡发电有限责任公司, 山西省 阳泉市 045000
3.山西大学资源与环境工程研究所, 山西省 太原市 030006
- 作者简介：
[ "牛斌(1994), 男, 硕士研究生, 主要研究方向为循环流化床机组的自动控制, nbin4853@sina.com" ]
[ "李丽锋(1990), 男, 工程师, 主要从事超临界循环流化床机组协调控制优化和调峰调频控制工作" ]
[ "孙倩(1998), 女, 硕士研究生, 主要研究方向为循环流化床机组的自动控制" ]
[ "张培华(1957), 男, 教授级高工, 主要研究火电厂自动控制、污染物排放控制和废弃物处理" ]
- 基金信息：
DOI：10.12096/j.2096-4528.pgt.20024
中图分类号： TK175收稿：2020-04-18，
纸质出版：2021-04-30
- 稿件说明：
移动端阅览
牛斌, 李丽锋, 孙倩, 等. 超临界循环流化床机组全负荷段深度调峰方法研究[J]. 发电技术, 2021,42(2):273-279.
Bin NIU, Lifeng LI, Qian SUN, et al. Research on the Method of Depth Peaking at Full Load of Supercritical Circulating Fluidized Bed Unit[J]. Power Generation Technology, 2021, 42(2): 273-279.
牛斌, 李丽锋, 孙倩, 等. 超临界循环流化床机组全负荷段深度调峰方法研究[J]. 发电技术, 2021,42(2):273-279. DOI： 10.12096/j.2096-4528.pgt.20024.
Bin NIU, Lifeng LI, Qian SUN, et al. Research on the Method of Depth Peaking at Full Load of Supercritical Circulating Fluidized Bed Unit[J]. Power Generation Technology, 2021, 42(2): 273-279. DOI： 10.12096/j.2096-4528.pgt.20024.
摘要
随着新能源发电装机容量不断扩大，火力发电市场受到严重挤压，为了满足电网深度调峰的需求，火电厂需要承担起深度调峰的重任，循环流化床机组可以采用停炉不停机的方式参与深度调峰。以山西某电厂超临界350MW循环流化床机组为研究对象，分析了超临界循环流化床机组2种典型汽水系统全负荷段深度调峰方法，对其中的操作要点进行了详细的阐述，并就操作过程中需要特别关注的问题进行了分析，也提出了相应的防控措施。分析表明：超临界循环流化床机组可以采用2种典型汽水系统实现全负荷段深度调峰；加装炉水循环泵系统投资大、操作复杂，增设贮水箱到除氧器管路投资小、操作简单，但是加装炉水循环泵系统参与全负荷段调峰时，各系统稳定性较好。
Abstract
With the expansion of installed capacity of new energy power generation
the thermal power market has been severely squeezed. To meet the needs of grid flexibility
thermal power plants are required to undertake the task of deep peak shaving. Circulating fluidized bed units can be used without shutdown. It takes a supercritical 350MW circulating fluidized bed unit in a power plant in Shanxi Province as the research object. Two kinds of deep peak shaving methods of supercritical circulating fluidized bed unit's typical steam-water systems were analyzed. Some problems that might be encountered during operation were analyzed. Corresponding prevention and control measures were provided. Finally
the analysis shows that the supercritical circulating fluidized bed unit can use two typical steam-water systems to achieve full load deep peak shaving. The investment of adding boiler water circulating pump system is large
and the operation is complex. The investment of adding water storage tank to deaerator pipeline is small
and the operation is simple. However
when the boiler water circulating pump system is added to participate in full load deep peak shaving
the stability of each system is better.
关键词
Keywords
references
张广才, 周科, 柳宏刚. 某超临界600MW机组直流炉深度调峰实践[J]. 热力发电, 2018, 47(5): 83-88.
ZHANG G C, ZHOU K, LIU H G, et al. Practice of deep peak load regulation or a 600MW supercritical concurrent boiler[J]. Thermal Power Generation, 2018, 47(5): 83-88.
王林, 伍刚, 张亚夫, 等. 1000 MW深度调峰机组热力系统优化研究[J]. 发电技术, 2019, 40(3): 265-269.
WANG L, WU G, ZHANG Y F, et al. Thermodyna-mic system optimization research on 1000 MW deep peak-regulating unit[J]. Power Generation Technology, 2019, 40(3): 265-269.
董民中, 任瑞利. 如何延长流化床锅炉的压火维持时间[J]. 节能与环保, 2001, 2(2): 43-44.
DONG M Z, REN R L. How to extend the pressure maintenance time of a fluidized bed boiler[J]. Energy Conservation and Environmental Protection, 2001, 2(2): 43-44.
陈文成. 带炉水循环泵直流炉启动阶段给水流量控制[J]. 热力发电, 2014, 43(2): 100-103.
CHEN W C. Water flow control start-up of an ultra supercritical 600MW unit once-through boiler with circulating pump[J]. Thermal Power Generation, 2014, 43(2): 100-103.
张磊. 炉水循环泵运行及故障分析[J]. 华电技术, 2017, 39(6): 62-64.
ZHANG L. Operation and failure analysis of boiler-water circulating pump[J]. Huadian Technology, 2017, 39(6): 62-64.
卢靖国. 循环流化床锅炉压火及热态启动过程中防汽温超温的措施[J]. 现代工业经济和信息化, 2015, 5(4): 65-66.
LU J G. Circulating fluidized bed boiler pressure fire and hot steam overtemperature measures in the process of hot start-up[J]. Modern Industrial Economy and Informationization, 2015, 5(4): 65-66.
李建军, 魏智诚, 李自强, 等. 300MW锅炉压火及热态启动[J]. 内蒙古科技与经济, 2012, 253(3): 105-109.
LI J J, WEI Z C, LI Z Q, et al. Pressure and hot start of 300MW boiler[J]. Inner Mongolia Science Technology and Economy, 2012, 253(3): 105-109.
赵峰, 周红梅, 宁罡. 不带炉水循环泵直流炉增加冷凝水箱至除氧器管道的结构改造[J]. 电站系统工程, 2012, 28(4): 49-52.
ZHAO F, ZHOU H M, NING G. Reformation of adding a pipe between condensate water tank and deaerator for to boiler without boiler water circulating pump[J]. Power System Engineering, 2012, 28(4): 49-52.
刘占春, 李琳娜. 提高除氧器排汽回收量[J]. 冶金设备, 2017, 239(2): 422-425.
LIU Z C, LI L N. Increasing the recovery of deaerator exhaust steam[J]. Metallurgical Equipment, 2017, 239(2): 422-425.
郭君. 浅析600MW超临界直流火电机组深度调峰技术措施及运行注意事项[J]. 电气工程与自动化, 2018, 27(4): 7-8.
GUO J. Brief analysis of technical measures and operational precautions for deep peak regulation of 600MW supercritical DC thermal power units[J]. Electrical Engineering and Automation, 2018, 27(4): 7-8.
刘大猛, 罗小鹏, 陈玉忠, 等. 超临界无炉水循环泵机组启动初期屏式过热器超温分析及控制[J]. 锅炉技术, 2015, 46(4): 77-80.
LIU D M, LUO X P, CHEN Y Z, et al. The analysis and control of platen superheater over temperature for supercritical unit without BCP at initial stage of start-up[J]. Boiler Technology, 2015, 46(4): 77-80.
胡乃威. 浅析循环流化床锅炉结焦事故原因及预防[J]. 山东工业技术, 2018, 6(6): 9-10.
HU N W. Analysis on the causes and prevention of coking accidents in circulating fluidized bed boilers[J]. Shandong Industrial Technology, 2018, 6(6): 9-10.
陶树成, 高子义, 曹献波, 等. 220t/h循环流化床锅炉的安全压火及热态启动探讨[J]. 内蒙古电力技术, 2009, 27(5): 100-104.
TAO S C, GAO Z Y, CAO X B, et al. Discussion of safety fire blanking and boiler hot start-up to 220t/h circulating fluidized bed boiler[J]. Inner Mongolia Electric Power, 2009, 27(5): 100-104.
李寿军, 刘卫强. 300MW循环流化床锅炉及热态启动操作方法探讨[J]. 内蒙古电力技术, 2011, 29(3): 102-104.
LI S J, LIU W Q. Discussion of operation method for 300MW CFB boiler banked fire and hot start-up[J]. Inner Mongolia Electric Power, 2011, 29(3): 102-104.
许明, 王少静, 徐瑞. 浅谈低速循环流化床锅炉的结焦与灭火的现象及预防措施[J]. 化学工程与装备, 2012, 10(1): 172-174.
XU M, WANG S J, XU R. Talking about the phenomenon of coking and fire suppression in low-speed circulating fluidized bed boilers and preventive measures[J]. Chemical Engineering&Equipment, 2012, 10(1): 72-174.
孙献斌, 戚峰, 辛以振, 等. 330 MW循环流化床锅炉燃烧调整试验研究[J]. 发电技术, 2019, 40(3): 281-285.
SUN X B, QI F, XIN Y Z, et al. Test study on combustion adjustment of 330 MW circulating fluidized bed boiler[J]. Power Generation Technology, 2019, 40(3): 281-285.
0
浏览量
0
下载量
0
CSCD
- Meta-XML下载
- BibTeX下载
- Endnote下载
- RefMan 下载
- NoteExpress下载
- NoteFirst下载
关联资源
相关文章
相关作者
相关机构
AI问答- 技术支持由北京北大方正电子有限公司提供 京ICP备09064830号-19
京公网安备11010802024621 - 本系统建议在Chrome、 IE9+ 以上版本浏览器阅读本站内容，360浏览器请切换至极速模式
- Cookies帮助我们提供服务并提供个性化体验。使用本网站，即表示您同意我们使用Cookies