1.华能伊春热电有限公司, 黑龙江省 伊春市 153000
2.东北电力大学能源与动力工程学院, 吉林省 吉林市 132000
[ "赵峰(1971), 男, 工程师, 主要从事大型火力发电企业生产管理工作, zhaofeng2275@163.com" ]
[ "孙明兴(1973), 男, 硕士, 高级工程师, 主要从事大型火力发电企业生产管理工作, smxstart@163.com" ]
[ "郝哲锋(1976), 男, 工程师, 主要从事电力生产管理工作, 1607637757@qq.com" ]
车德勇(1976), 女, 博士, 教授, 主要从事煤的洁净利用技术研究, 本文通信作者, chedeyong163@163.com
收稿:2020-12-20,
纸质出版:2021-10-31
移动端阅览
赵峰, 孙明兴, 郝哲峰, 等. 基于计算颗粒流体力学的旋风分离器结构优化[J]. 发电技术, 2021,42(5):637-642.
Feng ZHAO, Mingxing SUN, Zhefeng HAO, et al. Structure Optimization of Cyclone Separator Based on Computational Particle Fluid Dynamics[J]. Power Generation Technology, 2021, 42(5): 637-642.
赵峰, 孙明兴, 郝哲峰, 等. 基于计算颗粒流体力学的旋风分离器结构优化[J]. 发电技术, 2021,42(5):637-642. DOI: 10.12096/j.2096-4528.pgt.19178.
Feng ZHAO, Mingxing SUN, Zhefeng HAO, et al. Structure Optimization of Cyclone Separator Based on Computational Particle Fluid Dynamics[J]. Power Generation Technology, 2021, 42(5): 637-642. DOI: 10.12096/j.2096-4528.pgt.19178.
旋风分离器是火力发电厂颗粒脱除与筛分的主要设备,其内部流动特性直接影响旋风分离器的性能。为研究旋风分离器上部直筒段结构差异对其内部颗粒运动的影响,采用计算颗粒流体力学(computational particle fluid dynamics,CPFD)方法对直线型与螺旋型2种结构分离器内的气固两相耦合运动过程进行数值模拟。结果表明:螺旋型分离器直筒段的平均气流速度高于直线型分离器,同时其出口速度较大,在一定入口流速范围内,螺旋型分离器分离效果略占优势。研究结果为后期实际工程技术改造优化工作提供理论参考。
Cyclone separator is the main equipment for particle removal and screening in thermal power plants
and its internal flow characteristics directly affect the performance of cyclone separator. In order to study the influence of the structural difference of the upper cylindrical section of the cyclone separator on its internal particle motion
the numerical simulation of gas-solid two-phase coupled motion in a linear and a spiral separator was carried out by using computational particle fluid dynamics (CPFD). The results show that the average air velocity of the straight section of the spiral separator is higher than that of the linear separator. At the same time
the outlet speed is large. Within a certain inlet velocity range
the spiral separator is slightly superior in separation effect. The research results provide a theoretical reference for the optimization of later practical engineering technology transformation.
张知翔, 王海超, 赵钦新, 等. 卧式分离器出口结构数值优化分析[J]. 华北电力大学学报(自然科学版), 2010, 37(5): 68-72.
ZHANG Z X, WANG H C, ZHAO Q X, et al. Numerical study on optimization of exit configuration of horizontal cyclone[J]. Journal of North China Electric Power University (Natural Science Edition), 2010, 37(5): 68-72.
高助威, 王娟, 王江云, 等. 旋风分离器内涡核摆动的特性研究[J]. 工程热物理学报, 2017, 38(12): 2610-2618.
GAO Z W, WANG J, WANG J Y, et al. Study of the characteristics of vortex core oscillation in cyclone separator[J]. Journal of Engineering Thermophysics, 2017, 38(12): 2610-2618.
李琴, 邹康, 刘海东, 等. 入口高宽比对旋风分离器壁面冲蚀的影响[J]. 流体机械, 2017, 45(7): 52-57.
LI Q, ZOU K, LIU H D, et al. Effect of inlet aspect ratio on the wall erosion in the cyclone separator[J]. Fluid Machinery, 2017, 45(7): 52-57.
孙献斌, 戚峰, 辛以振, 等. 330 MW循环流化床锅炉燃烧调整试验研究[J]. 发电技术, 2019, 40(3): 281-285.
SUN X B, QI F, XIN Y Z, et al. Test study on combustion adjustment of 330MW circulating fluidized bed boiler[J]. Power Generation Technology, 2019, 40(3): 281-285.
李德波, 孙超凡, 冯永新, 等. 300 MW循环流化床气固流动及燃烧过程数值模拟研究及工程应用[J]. 广东电力, 2018, 31(7): 56-65.
LI D B, SUN C F, FENG Y X, et al. Numerical simulation research on gas-solid flow and combustion process of 300MW circulated fluidized bed and related engineering applications[J]. Guangdong Electric Power, 2018, 31(7): 56-65.
邱国华, 徐鹏志. 掺烧固废燃料的循环流化床锅炉引风机叶片腐蚀原因分析[J]. 发电技术, 2020, 41(6): 681-688.
QIU G H, XU P Z. Analysis on corrosion causes of induced draft fan blade in circulating fluidized bed boiler with mixed burning solid waste fuel[J]. Power Generation Technology, 2020, 41(6): 681-688.
彭丽, 石战胜, 董方. 基于CFD-DPM的旋风分离器结构优化[J]. 发电技术, 2021, 42(3): 343-349.
PENG L, SHI Z S, DONG F. Structure optimization of cyclone separator based on CFD-DPM[J]. Power Generation Technology, 2021, 42(3): 343-349.
朱维群, 唐震, 房亚杰, 等. 湿法脱硫烟气中霾的分析及解决途径[J]. 发电技术, 2019, 40(1): 46-50.
ZHU W Q, TANG Z, FANG Y J, et al. Analysis and solution of haze in wet flue gas desulfurization[J]. Power Generation Technology, 2019, 40(1): 46-50.
陈俊冬, 宋金仓, 曾川, 等. 旋风分离器分离性能的数值模拟与分析[J]. 化工进展, 2016, 35(5): 1360-1365.
CHEN J D, SONG J C, ZENG C, et al. Numerical simulation and analysis on separation performance of cyclone separator[J]. Chemical Industry and Engineering Progress, 2016, 35(5): 1360-1365.
王帅, 罗坤, 杨世亮, 等. 旋风分离器内气固两相流动特性的LES-DEM研究[J]. 工程热物理学报, 2016, 37(2): 342-346.
WANG S, LUO K, YANG S L, et al. LES-DEM investigation of the gas-solid flow characteristics in a cyclone separator[J]. Journal of Engineering Thermophysics, 2016, 37(2): 342-346.
张峰, 张亚新, 訾雪. 旋风分离器在褐煤干燥提质中的数值模拟[J]. 煤炭技术, 2018, 37(2): 295-297.
ZHANG F, ZHANG Y X, ZI X. Numerical simulation of cyclone separator in lignite drying and upgrading[J]. Coal Technology, 2018, 37(2): 295-297.
SNIDER D M. An incompressible three-dimensional multiphase particle-in-cell model for dense particle flows[J]. Journal of Computational Physics, 2001, 170: 523-549.
QIU G Z, YE J M, WANG H G, et al. CPFD simulation of gas-solids flow in annular combustion chamber of large-scale circulating fluidized bed[J]. Journal of University of Chinese Academy of Sciences, 2016, 33(2): 218-222.
AMARASINGHE W S, JAYARATHNA C K, AHANGAMA B S, et al. Experimental study and CFD modelling of minimum fluidization velocity for Geldart A, B and D particles[J]. International Journal of Modeling&Optimization, 2017, 7(3): 152-156.
CHLADEK J, JAYARATHNA C K, MOLDESTAD B M E, et al. Fluidized bed classification of particles of different size and density[J]. Chemical Engineering Science, 2018, 177: 151-162.
0
浏览量
0
下载量
0
CSCD
关联资源
相关文章
相关作者
相关机构
京公网安备11010802024621