广东工业大学 自动化学院,广东,广州,510006
刘锡均(1996–) ,男,硕士研究生,主要研究方向为永磁同步电机控制
谷爱昱(1970–),女,副教授,博士,主要研究方向为电机及其系统、特种电磁装置,E-mail:1296772438@qq.com
网络首发:2023-05-25,
纸质出版:2023
移动端阅览
刘锡均, 谷爱昱, 庞城洁. 基于PID代价函数的鲁棒型永磁同步电机模型预测控制[J]. 广东工业大学学报, 2023, 40(3): 67-73.
Liu Xi-jun, Gu Ai-yu, Pang Cheng-jie. Robust Model Predictive Control for PMSM Base on PID-type Cost Function[J]. 2023, 40(3): 67-73.
刘锡均, 谷爱昱, 庞城洁. 基于PID代价函数的鲁棒型永磁同步电机模型预测控制[J]. 广东工业大学学报, 2023, 40(3): 67-73. DOI: 10.12052/gdutxb.210199.
Liu Xi-jun, Gu Ai-yu, Pang Cheng-jie. Robust Model Predictive Control for PMSM Base on PID-type Cost Function[J]. 2023, 40(3): 67-73. DOI: 10.12052/gdutxb.210199.
当有限集模型预测控制(Finite Control Set Model Predictive Control
FCS-MPC) 应用在永磁同步电机(Permanent Magnet Synchronous Machine
PMSM) 弱磁控制时,系统存在参数鲁棒性较差的问题。为了解决此问题,本文提出一种基于比例−积分−微分(Proportional-Integral-Derivative
PID) 型代价函数的FCS-MPC永磁同步电机弱磁控制策略。在该策略中,PID型代价函数由3部分组成:跟踪电流的比例误差代价、削弱稳态控制误差的积分误差代价和降低纹波误差的微分误差代价。本文依据永磁同步电机的数学模型建立了预测模型,详细描述了PID型代价函数的FCS-MPC在永磁同步电机弱磁控制中的实现过程。同时,为了保证预测的准确性,对系统采用了延时补偿策略。仿真结果证明,当永磁同步电机在弱磁控制中参数失配时,本文提出的基于PID型代价函数的FCS-MPC,不仅可提高控制系统对电机参数和负载转矩扰动的鲁棒性,还保留了FCS-MPC良好的动态性能。
When finite control set model predictive control (FCS-MPC) is applied in the flux-weakening control of permanent magnet synchronous machine (PMSM)
the system suffers from poor parameter robustness. To solve this problem
a proportional-integral-derivative (PID) -type cost function of FCS-MPC in the flux-weakening control of PMSM is proposed. In the proposed strategy
the PID-type cost function consists of three components: the proportional error cost of tracking the current
the integral error cost of weakening the steady-state control error
and the differential error cost of reducing the ripple error. The prediction model is established by the mathematical model of PMSM
and the implementation process of FCS-MPC with PID-type cost function in the flux-weakening control of PMSM is described in detail. Meanwhile
the delay compensation strategy is applied to the system to ensure the accuracy of the prediction. The simulation results prove that when the parameters of the PMSM are mismatched in the flux-weakening control
the FCS-MPC base on the PID-type cost function can not only improve the robustness of the control system to motor parameters and load torque perturbations
but also retain the good dynamic performance of FCS-MPC.
LI L, JIE X, ZHAO Y, et al . Robust position anti-interference control for PMSM servo system with uncertain disturbance [J ] . CES Transactions on Electrical Machines and Systems, 2020 , 4(2): 151-160.
GU A Y, GUO Y W, DONG J N, et al. Modeling and analysis of the flux-weakening range of interior permanent magnet synchronous machines with segmented permanent magnets [C] //2020 8th International Conference on Power Electronics Systems and Applications (PESA) , Phoenix: IEEE, 2020.
QI X, SU T, ZHOU K, et al . Development of AC motor model predictive control strategy: an overview [J ] . Proceedings of the CSEE, 2021, 41(18): 6408-6419.
CHANG Y, BAO G Q, YANG M, et al . Application and development of model predictive control in permanent magnet synchronous motor system [J ] . Electric Machines Control Application, 2019, 46(8): 11-17.
ZHANG X, ZHAO Z. Multi-stage series model predictive control for PMSM drives [J]. IEEE Transactions on Vehicular Technology, 2021, 70(7): 6591-6600.
HAN Y, GONG C, YAN L, et al . Multi-objective finite control set model predictive control using novel delay compensation technique for PMSM [J ] . IEEE Transactions on Power Electronics, 2020, 35(10): 11193-11204.
SUN C, SUN D, CHEN W, et al . Improved model predictive control with new cost function for hybrid-inverter open-winding PMSM system based on energy storage model [J ] . IEEE Transactions on Power Electronics, 2021, 36(9): 10705-10715.
ZOU M, WANG S, LIU M, et al. Model predictive control of permanent-magnet synchronous motor with disturbance observer [C]//2019 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics (PRECEDE) , Phoenix: IEEE, 2019.
HANG J, WU H, ZHANG J, et al . Cost function-based open-phase fault diagnosis for PMSM drive system with model predictive current control [J ] . IEEE Transactions on Power Electronics, 2021, 36(3): 2574-2583.
YAN X L, XIE G, SUN T F, et al . Review on permanent magnet synchronous motor current control techniques based on model predictive control [J ] . Electric Machines Control Application, 2019, 46(9): 1-11.
SHI X, YI Y P, WANG X L. Research on flux weakening control technology of interior permanent magnet synchronous motor [J]. Electronic Science and Technology, 2020, 33(2): 14-19.
RUAN B, GU A Y, LIAN Y Z, et al . Analysis of weak magnetic characteristics of permanent magnet synchronous motor based on finite element method [J ] . Micromotors, 2019, 52(8): 5 5-58.
YAO X L, MA C W, WANG J F, et al . Robust model predictive current control for PMSM based on prediction error compensation [J ] . Proceedings of the CSEE, 2021, 41(17): 6071-6081.
李键. 永磁同步电机模型预测电流控制的预测误差分析及抑制研究[D]. 杭州: 浙江大学, 2019.
WANG N N, CAI B. Research on multi-parameter identification of PMSM based on an improved MPC algorithm [J]. Micromotors, 2018, 51(11): 62-67.
CHEN Z Y, QU W T. Model predictive current control for permanent magnet synchronous motors based on PID-type cost function [J]. Transactions of China Electrotechnical Society, 2021, 36(14): 2971-2978.
0
浏览量
0
下载量
0
CSCD
关联资源
相关文章
相关作者
相关机构
京公网安备11010802024621