平面机构自由度求解中低副高代去除轨迹点重合虚约束

张晓伟; 林秀君; 郑玲利; 潘继生; 唐文艳; 成思源

doi:10.12052/gdutxb.190132

欢迎来到能源电力期刊网！

English Version 期刊登录

您当前的位置：

首页 >

文章列表页 >

平面机构自由度求解中低副高代去除轨迹点重合虚约束

综合研究 | 更新时间：2026-05-27

- 平面机构自由度求解中低副高代去除轨迹点重合虚约束
- Removal of Redundant Constraints of Trajectory Coincidence by Substituting Lower Pair Mechanism by Higher Pair Mechanism in the Calculation of Degree of Freedom in Planar Mechanisms
- 广东工业大学学报 2020年37卷第2期页码：60-66
- 作者机构：
  
  广东工业大学机电工程学院,广东,广州,510006
- 作者简介：
  
  张晓伟(1977–)，女，讲师，博士，主要研究方向为创新理论、现代模型设计等
  林秀君(1968–)，女，讲师，硕士，主要研究方向为机械设计及理论等，E-mail：zxwei@gdut.edu.cn
- 基金信息：
  
  广东省本科高校高等教育教学改革项目(粤教高函〔2016〕233号);广东工业大学教育教学改革项目(广工大教字(2016)60号);广东工业大学“本科教学工程”项目(广工大教字(2016)54号)
- DOI：10.12052/gdutxb.190132
  中图分类号： TH112.1
- 网络首发：2020-03-10，
  
  纸质出版：2020
- 稿件说明：
移动端阅览
张晓伟, 林秀君, 郑玲利, 潘继生, 唐文艳, 成思源. 平面机构自由度求解中低副高代去除轨迹点重合虚约束[J]. 广东工业大学学报, 2020, 37(2): 60-66.

Zhang Xiao-wei, Lin Xiu-jun, Zheng Ling-li, et al. Removal of Redundant Constraints of Trajectory Coincidence by Substituting Lower Pair Mechanism by Higher Pair Mechanism in the Calculation of Degree of Freedom in Planar Mechanisms[J]. 2020, 37(2): 60-66.
张晓伟, 林秀君, 郑玲利, 潘继生, 唐文艳, 成思源. 平面机构自由度求解中低副高代去除轨迹点重合虚约束[J]. 广东工业大学学报, 2020, 37(2): 60-66. DOI： 10.12052/gdutxb.190132.

Zhang Xiao-wei, Lin Xiu-jun, Zheng Ling-li, et al. Removal of Redundant Constraints of Trajectory Coincidence by Substituting Lower Pair Mechanism by Higher Pair Mechanism in the Calculation of Degree of Freedom in Planar Mechanisms[J]. 2020, 37(2): 60-66. DOI： 10.12052/gdutxb.190132.

摘要

针对平面机构自由度求解中轨迹点重合的虚约束问题

提出低副高代的虚约束去除方法。对轨迹点重合的虚约束在平面运动副中的存在情况进行分析

以椭圆仪机构和齿轮直线机构为例

对其存在的位置进行分析

并进一步研究去除该虚约束的机构方案。结果表明: 若平面机构中存在轨迹点重合的虚约束

该轨迹点重合的虚约束并不存在于某个固定的运动副上; 在两构件距离不变的两点间加入构件和运动副类虚约束是轨迹点重合虚约束的特例; 在不减少构件数目的情况下可以采用将转动低副变成平面高副

去除轨迹点重合虚约束。

Abstract

Aiming at the redundant constraints of trajectory coincidence in the calculation of degree of freedom in planar mechanisms

substituting lower pair mechanism by higher pair mechanism method is proposed to remove them. The existence of redundant constraints of trajectory coincidence in revolute pair

prismatic pair and planar higher pair is analyzed. Taking elliptic mechanism and gear-linear mechanism as examples

the locations of redundant constraints of trajectory coincidence in mechanism pairs are analyzed

and the design of the mechanism scheme without the redundant constraints further studied. The results suggest that if there are redundant constraints of the trajectory coincidence in planar mechanism

the constraints do not exist on a fixed pair; the redundant constraint caused by adding a link with two revolute pairs at two points on two different links with fixed distance is an special case of the redundant constraints of the trajectory coincidence; without reducing the number of links

the redundant constraints of trajectory coincidence can be removed by changing the revolute pair into the planar higher pair.

关键词

Keywords

references

孙桓, 陈作模, 葛文杰. 机械原理[M]. 8版. 北京: 高等教育出版社, 2013.

杨可帧, 程光蕴. 机械设计基础[M]. 6版. 北京: 高等教育出版社, 2014.

ZHANG G Y, JIANG H, ZHANG T, et al . Dynamic modeling and analysis of 3-DOF spheroid parallel mechanism [J ] . Journal of Guangdong University of Technology, 2018, 35(6): 24-30.

郭卫东. 机械原理[M]. 2版. 北京: 科学出版社, 2013.

张策. 机械原理与机械设计[M]. 北京: 机械工业出版社, 2004.

申永胜. 机械原理教程[M]. 2版. 北京: 清华大学出版社, 2006.

韩建友, 杨通, 于靖军. 高等机构学[M]. 2版. 北京: 机械工业出版社, 2015, 9-18.

GUO W D, YU J J. A new method of mobility calculation for planar mechanisms [J]. Journal of Mechanical Engineering, 2013, 49(7): 125-129.

TONG S M. Identification of redundant constraint(s) in a planar mechanism using either the graph of instantaneous centers or the property of the graph’s adjacency matrix [J]. Journal of Beijing Union University, 2011, 25(1): 41-45.

FENG Y W, QIAN R M. Study on counting of virtual constraint degrees in mechanism [J]. Machinery Design Manufacture, 1999, 20(3): 241-244.

ZHANG M. Study on removal of false restraint [J]. Journal of Xinjiang Petroleum Institute, 2003, 15(2): 63-67.

WU W B, ZHANG Y X. The calculation of degrees of freedom of planar mechanism [J]. Equipment Manufacturing Technology, 2016(4): 266-268.

ZHAO Y, WANG K, LI S. Discussion on the calculation of plane-mechanism movement’s number [J]. Mechanical Management and Development, 2009, 24(6): 36-37.

YU X H, QIU L F, HAN J Y, et al . The calculation of degrees of freedom of mechanism in special conditions [J ] . Machinery, 2001, 28(6): 20-21.

CHEN Z L, PENG Y C, LIU Y C. On some problems in application of three-link theorem [J]. Journal of Qingdao Institute of Chemical Technology, 1999, 20(3): 241-244.

黄真, 刘婧芳, 李艳文. 论机构自由度[M]. 北京: 科学出版社, 2011.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

基于路况参数的混合动力机车能量管理策略研究

基于AAGV-YOLOX模型的输电线路异物检测研究

具守恒量波动方程的循环双子网物理信息神经网络

双模态迭代交叉注意力融合集成框架

基于高效时序建模的RGB-T跟踪