3D打印用钛合金粉末制备技术分析

唐超兰; 张伟祥; 陈志茹; 周德敬; 李龙; 楚瑞坤

doi:10.12052/gdutxb.180114

欢迎来到能源电力期刊网！

English Version 期刊登录

您当前的位置：

首页 >

文章列表页 >

3D打印用钛合金粉末制备技术分析

综合研究 | 更新时间：2026-05-27

- 3D打印用钛合金粉末制备技术分析
- Simple Descriptions of Preparation Technology of Titanium Alloy Powder for 3D Printing
- 广东工业大学学报 2019年36卷第3期页码：91-98
- 作者机构：
  
  1. 广东工业大学　机电工程学院,广东,广州,510006
  2. 银邦金属复合材料股份有限公司,江苏,无锡,214145
  3. 飞而康快速制造科技有限责任公司,江苏,无锡,214145
- 作者简介：
  
  唐超兰(1969−)，女，教授，主要研究方向为金属材料的压力加工
- 基金信息：
  
  科技部国家重点研发计划项目(2017YFB0305802);江苏省金属层状复合材料重点实验室资助项目(BM2014006)
- DOI：10.12052/gdutxb.180114
  中图分类号： TF123.23
- 网络首发：2019-05-09，
  
  纸质出版：2019
- 稿件说明：
移动端阅览
唐超兰, 张伟祥, 陈志茹, 周德敬, 李龙, 楚瑞坤. 3D打印用钛合金粉末制备技术分析[J]. 广东工业大学学报, 2019, 36(3): 91-98.

Tang Chao-lan, Zhang Wei-xiang, Chen Zhi-ru, et al. Simple Descriptions of Preparation Technology of Titanium Alloy Powder for 3D Printing[J]. 2019, 36(3): 91-98.
唐超兰, 张伟祥, 陈志茹, 周德敬, 李龙, 楚瑞坤. 3D打印用钛合金粉末制备技术分析[J]. 广东工业大学学报, 2019, 36(3): 91-98. DOI： 10.12052/gdutxb.180114.

Tang Chao-lan, Zhang Wei-xiang, Chen Zhi-ru, et al. Simple Descriptions of Preparation Technology of Titanium Alloy Powder for 3D Printing[J]. 2019, 36(3): 91-98. DOI： 10.12052/gdutxb.180114.

摘要

钛合金是3D打印中使用最广泛的金属材料

具有密度小、比强度高、耐热性好、耐蚀性优异、生物相容性好等优点. 不同于传统制造技术

3D打印技术对粉末材料有着极高的要求

粉末的质量会直接影响3D打印零件的性能. 本文从粉末性能入手

阐述了杂质含量、流动性、松装密度等因素对3D打印过程的影响; 然后综述了氢化脱氢法、气体雾化法、离心雾化法、等离子雾化法等钛合金粉末制备技术的原理和优缺点; 最后结合国内外研究现状

对改善钛合金粉末的方法进行探讨.

Abstract

Titanium alloy is the most widely used metal material in 3D printing

which has the advantages of low density

high specific strength

good heat resistance

excellent corrosion resistance and good biocompatibility. Different from the traditional manufacturing technology

3D printing technology has a very high demand for powder materials

and the quality of powder will directly affect the performance of 3D printing components. The influence of impurity content

fluidity and bulk density in the 3D printing process is described. Then the principle

advantages and disadvantages of hydrogenation and dehydrogenation

gas atomization

centrifugal atomization and plasma atomization are reviewed. Finally

according to the present research situation at home and abroad

methods of improving titanium alloy powder are discussed.

关键词

Keywords

references

BHUSHAN B, CASPERS M. An overview of additive manufacturing (3D printing) for microfabrication [J]. Microsystem Technologies, 2017, 23(4): 1117-1124.

FRAZIER W E. Metal additive manufacturing: A review [J]. Journal of Materials Engineering Performance, 2014, 23(6): 1917-1928.

BUSACHI A, ERKOYUNCU J, COLEGROVE P, et al . A review of additive manufacturing technology and cost estimation techniques for the defence sector [J ] . CIRP Journal of Manufacturing Science and Technology, 2017, 19: 117-128.

YAKOUT M, ELBESTAWI M A, VELDHUIS S C. A review of metal additive manufacturing technologies [J]. Solid State Phenomena, 2018, 278: 1-14.

MURR L E, MARTINEZ E, AMATO K N, et al . Fabrication of metal and alloy components by additive manu-facturing: examples of 3D materials science [J ] . Journal of Materials Research Technology, 2012, 1(1): 42-54.

WANG Y Q, SHEN J X, WU H Q. Application and research status of alternative materials for 3D printing technology [J]. Journal of Aeronautical Materials, 2016, 36(4): 89-98.

NGO T D, KASHANI A, IMBALZANO G, et al . Additive manufacturing (3D printing): a review of materials, methods, applications and challenges [J ] . Composites Part B Engineering, 2018, 143: 172-196.

王华明. 高性能金属构件增材制造技术开启国防制造新篇章[J]. 国防制造技术, 2013(3): 5-7.

KARLSSON J, SNIS A, ENGQVIST H, et al . Characterization and comparison of materials produced by electron beam melting (EBM) of two different Ti-6Al-4V powder fractions [J ] . Journal of Materials Processing Tech, 2013, 213(12): 2109-2118.

BANERJEE D, WILLIAMS J C. Perspectives on titanium science and technology [J]. Acta Materialia, 2013, 61(3): 844-879.

CUI C, HU B M, ZHAO L, et al . Titanium alloy production technology, market prospects and industry development [J ] . Materials Design, 2011, 32(3): 1684-1691.

ZHAO X H, Z UO Z B, HAN Z Y, et al . A Review on Powder Titanium Alloy 3D Printing Technology [J ] . Materials Review, 2016, 30(23): 120-126.

杨启云, 吴玉道, 仲守亮. 3D打印专用金属粉末的特性研究[C]// 全国粉末冶金学术会议暨海峡两岸粉末冶金技术研讨会. 武汉: [出版者不详], 2015.

汤慧萍, 王建. 金属3D打印中的材料问题及对策[C]//全国粉末冶金学术会议暨海峡两岸粉末冶金技术研讨会. 武汉: [出版者不详], 2015.

YANG G, FENG Z G, QIN L Y, et al . Effects of oxygen content in the argon shielding gas on microstructure and mechanical properties of laser deposition manufactured ta15 titanium alloy [J ] . Rare Metal Materials and Engineering, 2017, 46(6): 1650-1655.

LIU H Y, ZHAO J, XIE H S, et al . Effect of gas elements on mechanical properties of ZTC4 cast titanium alloy [J ] . Foundry, 2012, 61(9): 1006-1008.

LI Y R, HUANG B D, HE Q B. Influence of hydrogen on impact strength and microstructure of the titanium alloy Ti-Al-V [J]. Journal of Chongqing University (Natural Science Edition), 2003, 26(2): 127-131.

ZHANG F Y, CHEN J, TAN H, et al . Research on forming mechanism of defects in laser rapid formed titanium alloy [J ] . Rare Metal Materials and Engineering, 2007, 36(2): 211-215.

GAO Z J, ZHOU X L, LI J H, et al . Testing technology of metal powder raw material for material enhancement manufacturing [J ] . Thermal Spraying Technology, 2018, 10(2): 8-14.

刘一. 粉体体系堆积、流动特性及其与颗粒间作用力关系研究[D]. 上海: 华东理工大学, 2017.

FAN L K. Analysis of key factors of metal powder materials for additive manufacturing [J]. Physical Testing and Chemical Analysis (Part A:Physical Testing), 2015, 51(7): 480-482.

HUANG G M, LEI T, FANG S M, et al . Research progress of preparation powders by titanium hydrogenation [J ] . Titanium Industry Progress, 2010, 27(6): 6-9.

杨治军, 蒋鹏, 张建欣, 等. 钛及钛合金粉末制备研究的进展[C]//中国有色金属工业协会钛锆铪分会2014年会. 大连: [出版者不详], 2014: 226-232.

HUANG G, CAO X H, LONG X G. Physical and chemical properties of titanium-hydrogen system [J]. Materials Review, 2006, 20(10): 128-131.

DOMIZZI G, LUPPO M, VIGNA G. Microstructural features of the hydrogenation process in Ti grade 2 [J]. Journal of Alloys Compounds, 2006, 424(1): 193-198.

LIU J, SHANG Q L, ZHANG W, et al . Research progress in preparing titanium and titanium alloys by powder metallurgy with titanium hydride powder [J ] . Materials Review, 2013, 27(13): 99-102.

TANG X, LI A H, LI B. Preparation of spherical titanium and titanium alloy powder [J]. Powder Metallurgy Industry, 2018, 28(2): 58-64.

LIU W S, PENG F, MA Y Z, et al . Research progress in metal powder production by gas atomization [J ] . Materials Review, 2009, 23(3): 53-57.

李攀, 朱盼星. 增材制造用金属粉末制备工艺发展现状[C]// 全国粉末冶金学术会议暨海峡两岸粉末冶金技术研讨会. 武汉: [出版者不详], 2015: 159-163

HEIDLOFF A J, RIEKEN J R, ANDERSON I E, et al . Advanced gas atomization processing for Ti and Ti alloy powder manufacturing [J ] . Journal of the Minerals, Metals and Materials Society, 2010, 62(5): 35-41.

SUN P, FANG Z Z, ZHANG Y, et al . Review of the methods for production of spherical Ti and Ti alloy powder [J ] . Journal of the Minerals, Metals and Materials Society, 2017, 69(10): 1853-1860.

SHANG Q L, LIU J, FANG S M, et al . The preparation technology of titanium metal powder [J ] . Materials Review, 2013, 27(S1): 97-100.

董伟, 许富民, 魏宇婷, 等. 一种制备3D打印用超细球形金属粉末的方法及装置: 201510044848.9[P].2015-04-29.

XIE H W, ZOU L M, LIU X, et al . The situation of preparation technology of spherical titanium powders [J ] . Materials Research and Application, 2014, 8(2): 78-82.

徐骏, 盛艳伟, 胡强, 等. 一种微细球形钛及钛合金粉末的制备方法:201710059528.X[P]. 2017-05-10.

ENTEZARIAN M, ALLAIRE F, TSANTRIZOS P, et al . Plasma atomization: a new process for the production of fine, spherical powders [J ] . JOM, 1996, 48(6): 53-55.

TSANTRIZOS P G, ALLAIRE F C, ENTEZARIAN M. Method of production of metal and ceramic powders by plasma atomization: US, US5707419[P]. 1998-01-13.

KROEGER J, MARION F. Raymer APC: Leading the way with plasma atomised Ti spherical powders for MIM [J]. Powder Injection Moulding International, 2011, 5(4): 55.

LU L L, ZHANG S M, XU J, et al . Review on advanced preparation technology of spherical titanium powders [J ] . Chinese Journal of Rare Metals, 2017(1): 94-101.

刘立新, 芦绍立, 曹福劳. 3D打印钛和钛合金球形化专用低氧粉末的制备方法: 104493185A[P]. 2015-04-08.

HE W, JIANG Y, DU Y, et al . Fabrication and properties of ultrafine Ti powder by NaCl coat-ed/hydrogenation-dehydrogenation combined method [J ] . The Chinese Journal of Nonferrous Metals, 2012, 22(1): 158-164.

SHENG Y W, GUO Z M, HAO J J, et al . Preparation of micro-spherical titanium powder by RF plasma [J ] . Rare Metal Materials and Engineering, 2013, 42(6): 1291-1294.

聂祚仁, 张亚娟, 王海滨, 等. 一种3D打印用细颗粒球形钛粉的制备方法: 201510159503.8[P].2015-07-15.

WEI M W, CHEN S Y, GUO K K, et al . Preparation of TA15 titanium alloy powder by EIGA for laser 3D printing [J ] . Materials Review, 2017, 31(6): 64-67.

戴煜, 李礼. 等离子旋转雾化制备航空用3D打印金属粉体材料研究[J]. 新材料产业, 2016(8): 57-63.

DORVAL D C, KREKLEWETZ W, CARABIN P. Plasma apparatus for the production of high-quality spherical powders at high capacity: WO2016191854A1[P]. 2016-08-12.

LAROUCHE F, BALMAYER M, TRUDEAU-LALONDE F. Plasma atomization metal powder manufacturing processes and systems therefore: WO 2017011900 A1[P]. 2017-01-26.

GU Z T, YE G Y, LIU C D, et al . Study on the spheroidization of titanium powders in a radio frequency plasma [J ] . Development and Application of Materials, 2009, 24(4): 30-34.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

基于AAGV-YOLOX模型的输电线路异物检测研究

储能变流器电能质量治理策略研究

SCA-YOLO: 基于可变形卷积与上下文感知注意力的实时目标检测

双模态迭代交叉注意力融合集成框架

基于路况参数的混合动力机车能量管理策略研究