Application of high crosslinked gel type cation exchange resin and porous type anion exchange resin for condensate polishing in a 1 060MW air-cooled unit
LI Huanfang, Izuru Tokumaru. Application of high crosslinked gel type cation exchange resin and porous type anion exchange resin for condensate polishing in a 1 060MW air-cooled unit[J]. Thermal power generation, 2013, 42(11): 127-129.
LI Huanfang, Izuru Tokumaru. Application of high crosslinked gel type cation exchange resin and porous type anion exchange resin for condensate polishing in a 1 060MW air-cooled unit[J]. Thermal power generation, 2013, 42(11): 127-129.DOI:
The high crosslinked gel type cation exchange resin(CSK40)with oxidation-resistant ability(durability)
and porous type anion exchange resin(CPA12)which has a property of antiorganic contamination
were applied in condensate polishing system of 1 060MW unit in Huadian Ningxia Lingwu Power Generation Co.
Ltd.Detection of the running resins was conducted after15months since they were put into service.The results showed the resins maintained high quality.Although the value of PSS adsorption capacity of anion exchange resin decreased to a certain extent
the change of PSS leachable rate of cation exchange resin and mass transfer coefficient(MTC)of anion exchange resin was still small.Therefore
it is considered that this type of resin combination has high conformity to CP of air-cooled thermal power plants that with very high condensate temperature and under very sever operation conditions for resins.