JIANG Xiaofeng. Thermodynamic calculation for an ultra supercritical boiler and its application[J]. Thermal power generation, 2014, 43(11): 126-131.DOI:
超超临界机组锅炉热力计算及改造
摘要
受外循环影响
超超临界机组锅炉有多种热力计算流程。运用3种不同的锅炉热力计算流程分析了A电厂锅炉的再热器欠温问题
提出了末级再热器改造方案。改造后
再热蒸汽温度明显升高
末级再热器工质升温幅度由76℃提高到98℃
弥补了炉膛出口温度低于设计值引起的末级再热器换热损失。
Abstract
By taking a boiler in power plant A as an example
thermodynamic calculation process of the ultra supercritical boilers was analyzed.Affected by the external circulation
the ultra supercritical boilers have a variety of calculation processes.Three calculation processes were employed to investigate the insufficient reheater steam temperature of the boiler
and a transformation scheme for the final reheater was put forward.Check calculation for performance parameters of the retrofitted boiler was carried out
under three conditions with different gas components.The results show that
after the modification
the reheater steam increased dramatically and the temperature rise of the reheater working fluid increased from 76℃to 98℃.This transformation scheme compensates the heat transfer loss in the final reheater caused by low furnace outlet temperature.