LI Zhen, WANG Weiwang, LI Shengtao, et al. Influence of Ultraviolet Irradiation in Vacuum on DC Breakdown and Surface Flashover Characteristics of Silicone Rubber[J]. 2019, 45(9): 2919-2927.
LI Zhen, WANG Weiwang, LI Shengtao, et al. Influence of Ultraviolet Irradiation in Vacuum on DC Breakdown and Surface Flashover Characteristics of Silicone Rubber[J]. 2019, 45(9): 2919-2927.DOI:
真空紫外辐照对硅橡胶直流击穿和沿面闪络特性的影响
摘要
电力系统复杂的工作环境会导致硅橡胶材料发生击穿和沿面闪络。首先对硅橡胶试样在真空环境下进行紫外射线辐照处理24 h
Breakdown and surface flashover are likely to occur on silicone rubber in the complex operation environments of electrical system. Firstly
silicone rubber specimens were treated by ultraviolet irradiation in vacuum for 24 hours
and DC breakdown and surface flashover characteristics of treated and untreated specimens were tested. Then
the activation energy and relaxation time distribution were calculated by dielectric relaxation spectroscopy. The trap characteristics were analyzed by surface potential decay. Finally
the chemical reaction of silicone rubber molecular chains was characterized using infrared spectroscopy. The results indicate that the molecular chains of silicone rubber crosslink via ultraviolet irradiation in vacuum
the activation energy of dipolar orientation polarization increases
while the molecular chain relaxation time decreases and molecular chain dynamic is hindered
which can improve the trap level and suppress the charge transport process of silicone rubber. DC breakdown strength and surface flashover voltage will increase by 2.38% and 8.79%
respectively. The molecular chain dynamic and charge transport process of silicone rubber
which is irradiated by ultraviolet in vacuum of which pressure is lower than 5×10-4 Pa for 24 h
are suppressed
thus the DC breakdown and surface flashover characteristics will be enhanced efficiently. The results can provide references for solving breakdown and surface flashover in silicone rubbers.