孙曙光, 邵旭, 王景芹, 魏硕. 基于振电信号分析与二元维纳的断路器附件机械寿命预测[J]. 高电压技术, 2024, 50(2): 503-514. DOI: 10.13336/j.1003-6520.hve.20221244
引用本文: 孙曙光, 邵旭, 王景芹, 魏硕. 基于振电信号分析与二元维纳的断路器附件机械寿命预测[J]. 高电压技术, 2024, 50(2): 503-514. DOI: 10.13336/j.1003-6520.hve.20221244
SUN Shuguang, SHAO Xu, WANG Jingqin, WEI Shuo. Mechanical Life Prediction of Circuit Breaker Accessory Based on Joint Analysis of Vibro-electrical Signals and Binary Wiener[J]. High Voltage Engineering, 2024, 50(2): 503-514. DOI: 10.13336/j.1003-6520.hve.20221244
Citation: SUN Shuguang, SHAO Xu, WANG Jingqin, WEI Shuo. Mechanical Life Prediction of Circuit Breaker Accessory Based on Joint Analysis of Vibro-electrical Signals and Binary Wiener[J]. High Voltage Engineering, 2024, 50(2): 503-514. DOI: 10.13336/j.1003-6520.hve.20221244

基于振电信号分析与二元维纳的断路器附件机械寿命预测

Mechanical Life Prediction of Circuit Breaker Accessory Based on Joint Analysis of Vibro-electrical Signals and Binary Wiener

  • 摘要: 分闸附件作为动作触发机构,其机械性能对于万能式断路器可靠运行至关重要。针对其寿命预测,提出了一种基于二元维纳性能退化分析的寿命预测方法。该方法结合分闸附件的工作机制,采取振电联合分析模式。首先,利用CEEMDAN-WD与短时能熵比双门限法,实现分闸过程触发阶段特定动作振动事件的精准标定;然后,研究振动事件所对应的机构动作时间以及驱动能量参数作为性能退化指标;在此基础之上构建二元维纳模型,以振电联合分析指标作为预测模型的输入,最终实现剩余寿命的定量预测。通过对3台断路器的测试表明,基于振电协同分析的寿命预测方法具有更高的预测精度,3台试品平均相对误差分别为4.3%、9.77%、8.46%,兼具有工程实用性。

     

    Abstract: As an action trigger mechanism, the mechanical performance of the opening accessory is very important for the reliable operation of conventional circuit breaker. Aiming at its life prediction, a life prediction method based on binary Wiener performance degradation analysis is proposed. Combining the working mechanism of the opening accessory, the method adopts the vibro-electrical joint analysis mode. First, CEEMDAN-WD and double-threshold method based on short-term energy entropy ratio are used to realize the accurate calibration of the vibration events for the specific actions in the triggering stage of the opening process. Then, the time and driving energy parameters of the mechanism action corresponding to the vibration event are used as the performance degradation index. On this basis, a binary Wiener model is constructed with the vibro-electrical joint analysis index as the input of the prediction model, and the quantitative prediction of the remaining life is realized finally. The tests on three circuit breakers show that the life prediction method based on vibro-electrical synergistic analysis has higher prediction accuracy. The average relative errors of the three test products are 4.3%, 9.77%, and 8.46%, respectively, which has engineering practicality.

     

/

返回文章
返回