To quickly calculate the load response of hybrid pile-bucket foundation for offshore wind turbine
based on the PISA (pile soil analysis) monopile design method
the three-dimensional bucket is simplified as a one-dimensional beam attached to the monopile. By adding two soil reaction curves describing bucket-soil interaction to four soil reaction curves describing pile-soil interaction
a one-dimensional (1D) simplified design model of hybrid pile-bucket foundation for offshore wind turbine is established
and the accuracy of the model is verified by comparing it with the existing centrifuge model test results. On this basis
the dynamic response of hybrid pile-bucket foundation under cyclic loads is calculated by applying reduction factors to the soil reaction curves within the bucket depth
and the applicability of this method is discussed. The results show that within the calibration space
the 1D design model has high computational efficiency and accuracy close to the 3D numerical model. Under actual working conditions
the 1D design model can accurately predict the cyclic load response of hybrid pile-bucket foundation. This study can provide theoretical guidance for the design of hybrid pile-bucket foundation for offshore wind turbine.
关键词
Keywords
references
ARAPOGIANNI A, GENACH A B.Deep water-the next step for offshore wind energy[R]. European Wind Energy Association(EWEA), 2013.
LI L C, LIU X, LIU H, et al.Experimental and numerical study on the static lateral performance of monopile and hybrid pile foundation[J]. Ocean engineering, 2022, 255: 111461.
LIU R, SHI J Y, CHEN G S, et al.Lateral bearing capacity and calculation method of pile-bucket foundation in clay for offshore wind turbines[J]. Ocean engineering, 2023, 283: 115039.
LI L C, ZHENG M Y, LIU X, et al.Numerical analysis of the cyclic loading behavior of monopile and hybrid pile foundation[J]. Computers and geotechnics, 2022, 144: 104635.
BYRNE B W, BURD H J, ZDRAVKOVIĆ L, et al.PISA: new design methods for offshore wind turbine monopiles[J]. Revue française de géotechnique, 2019(158): 3.
BYRNE B W, BURD H J, ZDRAVKOVIC L, et al.PISA design methods for offshore wind turbine monopiles[C]//Offshore Technology Conference. Houston, Texas, 2019: D011S005R002.
BYRNE B W, HOULSBY G T, BURD H J, et al.PISA design model for monopiles for offshore wind turbines: application to a stiff glacial clay till[J]. Géotechnique, 2020, 70(11): 1030-1047.
LAI Y Q, LI W, HE B, et al.Centrifuge modelling of monotonic and cyclic lateral responses of a hybrid monopile-bucket foundation for offshore wind turbines[J]. Ocean engineering, 2022, 260: 111967.
BURD H J, TABORDA D M G, ZDRAVKOVIĆ L, et al. PISA design model for monopiles for offshore wind turbines: application to a marine sand[J]. Géotechnique, 2020, 70(11): 1048-1066.
PANAGOULIAS S, BRINKGREVE R B J, ZAMPICH L. PLAXIS monopile designer 2018[R]. Plaxis bv, Delft, the Netherlands, 2018.
ZHANG Y H, ANDERSEN K H, JEANJEAN P, et al.A framework for cyclic p-y curves in clay and application to pile design in GoM[C]//Offshore Site Investigation Geotechnics 8th International Conference Proceedings. London, UK, 2017: 431-440.
FU D F, ZHANG Y H, AAMODT K K, et al.A multi-spring model for monopile analysis in soft clays[J]. Marine structures, 2020, 72: 102768.
JEANJEAN P. Re-assessment of p-y curves for soft clays from centrifuge testing and finite element modeling[C]//Offshore Technology Conference. Houston, Texas, 2009: OTC-20158-MS.
KULHAWY F H, CHEN Y J.A thirty year perspective of Broms' lateral loading models, as applied to drilled shafts[C]//Proceedings of Bengt B. Broms Symposium on Geotechnical Engineering. Singapore: World Scientific, 1995: 225-240.