单层、中孔和内插石英玻璃管3种吸热器耦合传热特性对比研究

李兴友; 向韬; 王孝宇; 戴贵龙

doi:doi:10.19912/j.0254-0096.tynxb.2024-1451

English Version Reader LoginJournal Login

您当前的位置：

首页 >

文章列表页 >

单层、中孔和内插石英玻璃管3种吸热器耦合传热特性对比研究

更新时间：2026-01-08

- 单层、中孔和内插石英玻璃管3种吸热器耦合传热特性对比研究
- Vol. 46, Issue 12, Pages: 369-377(2025)
- 作者机构：
- 作者简介：
- 基金信息：
- DOI：doi:10.19912/j.0254-0096.tynxb.2024-1451
  CLC： TK513
- Published Online：07 January 2026，
  
  Published：2025
- 稿件说明：
移动端阅览
李兴友, 向韬, 王孝宇, et al. 单层、中孔和内插石英玻璃管3种吸热器耦合传热特性对比研究[J]. 2025, 46(12): 369-377.
DOI：

李兴友, 向韬, 王孝宇, et al. 单层、中孔和内插石英玻璃管3种吸热器耦合传热特性对比研究[J]. 2025, 46(12): 369-377. DOI： doi:10.19912/j.0254-0096.tynxb.2024-1451.

摘要

为降低多孔介质吸热器中心表面温度、提高热效率和并保障安全运行

设计一种内插石英玻璃管的吸热芯结构。该吸热器通过在单层多孔介质吸热器中心区域开设圆柱孔

并插入石英玻璃管

实现工质流体速度与高斯型聚集太阳光热流密度的匹配。在此基础上

采用数值模拟与实验验证相结合的方法

对单层、中孔和内插石英玻璃管3种多孔介质吸热器的高温吸热特性进行对比研究。结果表明

与单层吸热芯相比

中孔、内插玻璃管吸热器中心区域流速由0.75 m/s分别提升至1.6 m/s和1.8 m/s

聚集太阳光热流密度峰值由1.5 MW/m2分别降至0.92 MW/m2和1.2 MW/m2

固体峰值温度由1740 K分别降至1444 K和1436 K。在3~10 g/s流速范围内

热效率由单层吸热芯的58%~70%提升至中孔吸热芯的66%~78%和内插石英玻璃管吸热芯的71%~82%。

Abstract

A modified porous solar receiver with a hollow glass tube at the center was developed to decrease the surface temperature of the receiver and improve thermal efficiency and security.The hollow glass tube matches the heat transfer fluid （HTF） and the concentrated solar flux （CSF）

which can increase the velocity of the HTF by suction effect and reduce the CSF by increasing the absorption area. Then

the high-temperature heat transfer characteristics of the single porous receiver （SPR）

modified porous receiver with a center hole （MPR-CH）

and modified porous receiver with a hollow glass tube （MPR-HGT） were investigated and compared.Results show that the maximal velocity of the HTF at the center zone of the SPR

MPR-CH

and MPR-HGT increases from 0.75 m/s to 1.6 m/s and 1.8 m/s

respectively. The peak CSF of the SPR

MPR-CH

and MPR-HGT increases from 0.75 m/s to 1.6m/s and 1.8 m/s

respectively.Accordingly

the peak solid temperature of the SPR

MPR-CH

and MPR-HGT decreases from 1740 K to 1444 K and 1436 K

respectively.The thermal efficiency of the three receivers increases from 59.3%~71.9% to 65.7%~79.9% and 70.4%~81.6% during the mass flow rate of the HTF from 3.0 g/s to 10.0 g/s. This modified porous solar receiver design can be implemented into advanced

high-temperature power cycles.

关键词

Keywords

references

AVILA-MARIN A L, FERNANDEZ-RECHE J, MARTINEZ-TARIFA A. Modelling strategies for porous structures as solar receivers in central receiver systems: a review[J]. Renewable and sustainable energy reviews, 2019, 111: 15-33.

HE Y L, DU S, SHEN S.Advances in porous volumetric solar receivers and enhancement of volumetric absorption[J]. Energy reviews, 2023, 2(3): 100035.

CUNSOLO S, COQUARD R, BAILLIS D, et al.Radiative properties of irregular open cell solid foams[J]. International journal of thermal sciences, 2017, 117: 77-89.

WU Z Y, CALIOT C, FLAMANT G, et al.Coupled radiation and flow modeling in ceramic foam volumetric solar air receivers[J]. Solar energy, 2011, 85(9): 2374-2385.

戴贵龙, 陈雪淇, 庄莹. 玻璃套管双层吸热芯的热辐射特性研究[J]. 太阳能学报, 2022, 43(7): 186-190.

HE Y L, WANG K, QIU Y, et al.Review of the solar flux distribution in concentrated solar power: non-uniform features, challenges, and solutions[J]. Applied thermal engineering, 2019, 149: 448-474.

戴贵龙, 薛鑫杰, 陈雪淇, 等. 双层吸热芯聚集太阳光吸收分布特性研究[J]. 太阳能学报, 2021, 42(4): 328-333.

CHEN X, XIA X L, YAN X W, et al.Heat transfer analysis of a volumetric solar receiver with composite porous structure[J]. Energy conversion and management, 2017, 136: 262-269.

SEDIGHI M, PADILLA R V, ALAMDARI P, et al.A novel high-temperature (>700 ℃), volumetric receiver with a packed bed of transparent and absorbing spheres[J]. Applied energy, 2020, 264: 114705.

ZHANG Q Q, CHANG Z S, FU M K, et al.Performance analysis of a light uniform device for the solar receiver or reactor[J]. Energy, 2023, 270: 126940.

DU S, XIA T, HE Y L, et al.Experiment and optimization study on the radial graded porous volumetric solar receiver matching non-uniform solar flux distribution[J]. Applied energy, 2020, 275: 115343.

刘锋章, 程博, 秦宁, 等. 太阳能驱动甲烷重整泡沫反应器聚光特性研究及优化设计[J]. 太阳能学报, 2024, 45(7): 599-606.

ALI M, RADY M, ATTIA M A A, et al. Consistent coupled optical and thermal analysis of volumetric solar receivers with honeycomb absorbers[J]. Renewable energy, 2020, 145: 1849-1861.

ZHANG S D, SUN C, SUN F X, et al.Spectral properties of an UV fused silica within 0.8 to 5 µm at elevated temperatures[J]. Infrared physics & technology, 2017, 85: 293-299.

XIA X L, CHEN X, SUN C, et al.Experiment on the convective heat transfer from airflow to skeleton in open-cell porous foams[J]. International journal of heat and mass transfer, 2017, 106: 83-90.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

COMBINED HEAT TRANSFER PERFORMANCES OF POROUS VOLUMETRIC SOLAR RECEIVER INSERTED WITH GLASS TUBE

COMBINED HEAT TRANSFER PERFORMANCES OF VOLUMETRIC SOLAR ABSORBER WITH QUARTZ GLASS PERFORATED PLATES

基于瞬态模拟的中置蓄热式Trombe墙热性能分析

Related Author

Dai Guilong

Xiang Tao

Wang Xiaoyu

Qiu Jinyou

Dai Guilong

Chen Xueqi

Wang Xiaoyu

李纪伟

Related Institution

Key Laboratory of New Energy and Energy-saving in Building, Fujian Province University, Fujian University of Technology

Faculty of Environment and Life, Beijing University of Technology

College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics

School of Materials and Energy, Guangdong University of Technology

AI问答

⁰