This article focuses on mountainous photovoltaic (PV) power stations as the research subject. An automated layout model for these power stations is developed based on the TIN algorithm for contour-to-grid terrain modeling
integrated with scanning line and terrain projection algorithms. Additionally
a shadow occlusion and power generation simulation model is constructed using the polygon (W-A) clipping algorithm and the Perez model. This study analyzes terrain data from a mountainous area in Chongqing
demonstrating that the automated layout algorithm effectively resolves the challenge of transforming the multi-faceted layout of triangular grids into a single-faceted layout. Furthermore
the proposed shadow occlusion
irradiance
and power generation models are compared with PVsyst simulation results. The maximum shadow occlusion error is 0.52%
the average irradiance error is 1%
and the annual power generation error is 0.83%. With a power generation deviation of less than 5%
the results indicate that the method presented in this study is highly accurate.
JIA Q R, LI W W, CHE D F.A triangulated irregular network constrained ordinary Kriging method for three-dimensional modeling of faulted geological surfaces[J]. IEEE access, 2020, 8: 85179-85189.
XU F, JIN Y Q.Imaging simulation of polarimetric SAR for a comprehensive terrain scene using the mapping and projection algorithm[J]. IEEE transactions on geoscience and remote sensing, 2006, 44(11): 3219-3234.
HAY J E.Calculating solar radiation for inclined surfaces: Practical approaches[J]. Renewable energy, 1993, 3(4): 373-380.
PEREZ R, STEWART R, ARBOGAST C, et al.An anisotropic hourly diffuse radiation model for sloping surfaces: description, performance validation, site dependency evaluation[J]. Solar energy, 1986, 36(6): 481-497.
EQUIVALENT MODELING OF DISTRIBUTED PHOTOVOLTAIC POWER STATIONS BASED ON LINE IMPEDANCE CLUSTERING
STUDY ON SIMULATION AND OPTIMIZATION OF SOLAR ORGANIC RANKINE CYCLE POWER GENERATION SYSTEM
SIMULATION ANALYSIS AND APPLICATION OF WIND FARM BASED ON MULTI-CONTROLLERS HARDWARE-IN-THE-LOOP SIMULATION TECHNOLOGIES
MODELING AND ANALYSIS OF CCM FLYBACK CONVERTER BASED ON R-L FRACTIONAL-ORDER DEFINITION
Related Author
项立鹏
于庆龙
陈选豪
侯天才
白建波
郑爽
Zhang Xing
Ma Mingyao
Related Institution
National and Local Joint Engineering Laboratory for Renewable Energy Access to Grid Technology
School of Energy and Environmental Engineering, Hebei University of Engineering
Hebei HVAC Technology Innovation Center
State Key Laboratory of Operation and Control of Renewable Energy & Storage Systems, (China Electric Power Research Institute)
Hebei Provincial Collaborative Innovation Center of Transportation Power Grid Intelligent Integration Technology and Equipment, Shijiazhuang Tiedao University