To address the difficulty of analytical modeling of the internal resistance and incremental capacity of lithium-ion batteries
this paper proposes a mechanism-based modeling method with battery current and temperature as inputs variables and the internal resistance and incremental capacity as outputs. Firstly
the method constructs a voltage mechanism model based on the Arrhenius equation
which can quantitatively describe the voltage under the influence of current
temperature and other variables
as well as a Bernardi thermal mechanism model under the influence of current
voltage and other variables. Secondly
the coupling effects between the above two models and between the variables are decoupled through well-designed experiments. Then
the analytical model for internal resistance and incremental capacity analytical model are further derived. The experimental results show that the proposed method requires minimal experimentalal effect and can accurately estimate the battery voltage
internal resistance and incremental capacity. The voltage error is lower than 0.3‰ and the internal resistance error is lower than 1.2%.
关键词
Keywords
references
CHEN Y J, YANG G, LIU X, et al.A time-efficient and accurate open circuit voltage estimation method for lithium-ion batteries[J]. Energies, 2019, 12(9): 1803.
ZHANG Z P, MIN H T, GUO H G, et al.State of health estimation method for lithium-ion batteries using incremental capacity and long short-term memory network[J]. Journal of energy storage, 2023, 64: 107063.
HU X S, FENG F, LIU K L, et al.State estimation for advanced battery management: key challenges and future trends[J]. Renewable and sustainable energy reviews, 2019, 114: 109334.
REN H L, JIA L, DANG C, et al.An electrochemical-thermal coupling model for heat generation analysis of prismatic lithium battery[J]. Journal of energy storage, 2022, 50: 104277.
WANG D F, HUANG H Q, TANG Z H, et al.A lithium-ion battery electrochemical-thermal model for a wide temperature range applications[J]. Electrochimica acta, 2020, 362: 137118.
WASSILIADIS N, ANK M, BACH A, et al.A systematic approach for the parameter identification of electrochemical battery models enabling health-aware fast charging control of battery electric vehicles[J]. Journal of energy storage, 2022, 56: 105951.
GAN Y H, WANG J Q, LIANG J L, et al.Development of thermal equivalent circuit model of heat pipe-based thermal management system for a battery module with cylindrical cells[J]. Applied thermal engineering, 2020, 164: 114523.
DAN D, YAO C N, ZHANG Y J, et al.Dynamic thermal behavior of micro heat pipe array-air cooling battery thermal management system based on thermal network model[J]. Applied thermal engineering, 2019, 162: 114183.
LIN X F, PEREZ H E, MOHAN S, et al.A lumped-parameter electro-thermal model for cylindrical batteries[J]. Journal of power sources, 2014, 257: 1-11.
RODRÍGUEZ-ITURRIAGA P, GARCÍA V M, RODRÍGUEZ-BOLÍVAR S, et al. A coupled electrothermal lithium-ion battery reduced-order model including heat generation due to solid diffusion[J]. Applied energy, 2024, 367: 123327.
HOU G Q, LIU X Q, HE W X, et al.An equivalent circuit model for battery thermal management system using phase change material and liquid cooling coupling[J]. Journal of energy storage, 2022, 55: 105834.
LIU W, TEH J, ALHARBI B, et al.An electric-thermal coupling modeling method for lithium-ion battery using the state of charge normalization calculation method[J]. Journal of energy storage, 2023, 72: 108724.
XU X D, TANG S J, REN H H, et al.Joint state estimation of lithium-ion batteries combining improved equivalent circuit model with electrochemical mechanism and diffusion process[J]. Journal of energy storage, 2022, 56: 106135.
HARIHARAN K S.A coupled nonlinear equivalent circuit-thermal model for lithium ion cells[J]. Journal of power sources, 2013, 227: 171-176.
GISMERO A, NØRREGAARD K, JOHNSEN B, et al. Electric vehicle battery state of health estimation using Incremental Capacity Analysis[J]. Journal of energy storage, 2023, 64: 107110.
JIANG B, DAI H F, WEI X Z.Incremental capacity analysis based adaptive capacity estimation for lithium-ion battery considering charging condition[J]. Applied energy, 2020, 269: 115074.