Li Lantian, Zhang Hao, Zhang Shaoguang, et al. Noise prediction and reduction methods for LAGOON landing gear based on Lattice Boltzmann method[J]. 2026, 44(4): 65-76.
Li Lantian, Zhang Hao, Zhang Shaoguang, et al. Noise prediction and reduction methods for LAGOON landing gear based on Lattice Boltzmann method[J]. 2026, 44(4): 65-76.DOI: 10.7638/kqdlxxb-2024.0190.
Noise prediction and reduction methods for LAGOON landing gear based on Lattice Boltzmann method
The landing gear is recognized as a significant source of noise during the takeoff and landing phases of civil aircraft operations. Understanding the mechanisms behind its noise generation and exploring effective control methods are crucial for improving overall noise management in aviation. This article presentd a detailed numerical study employing the Lattice Boltzmann Method (LBM) to simulate the three-dimensional unsteady flow around the LAGOON (LAnding Gear nOise database for civil aviation authority validatiON) model of landing gear. The study applied the Ffowcs Williams-Hawkings (FW-H) equation to compute far-field noise levels. Initially
the research investigated the impact of mesh resolution on simulation results by comparing them against wind tunnel data to verify the accuracy of the numerical calculations. Subsequently
the study analyzed the noise generation mechanisms and spectral characteristics
providing a comparative assessment of the effects of different FW-H integration planes on noise predictions. This analysis highlighted the critical role of integration surface selection in ensuring prediction reliability. Furthermore
the research evaluated flow control strategies
specifically examining the noise reduction effect of cavity filling in the landing gear model. The findings indicate that using a penetrable surface as the FW-H integration surface yields closer agreement with experimental measurements compared to a solid surface. Additionally
reducing the total sound pressure level by approximately 3.0 dB in both the far-field flyover and sideline directions. This finding suggests a viable approach for aircraft noise reduction design. This study systematically validates the applicability of LBM based prediction framework for landing gear aeroacoustics. The elucidated noise generation mechanisms and the noise reduction effect of the cavity filling scheme provide methodological insights and data support for subsequent engineering-oriented low-noise landing gear design.
关键词
Keywords
references
Long Shuangli, Nie Hong. Analysis of large civil aircraft landing gear noise[J]. Aeronautical Science and Technology, 2010, 21(2): 16−18(in Chinese). doi: 10.3969/j.issn.1007-5453.2010.02.006
Zhang Weimin, Hao Xuan, Chen Dabin, et al. Aeroacoustic prediction of large commercial aircraft[J]. Aeronautical Manufacturing Technology, 2010, 53(14): 66−69(in Chinese). doi: 10.16080/j.issn1671-833x.2010.14.007
Liu Peiqing, Xing Yu, Li Ling, et al. Progress in aeroacoustic investigation of modern large aircraft landing gear[J]. Acta Aerodynamica Sinica, 2017, 35(6): 751−759(in Chinese). doi: 10.7638/kqdlxxb-2017.0063
Zhao Kun, Liang Junbiao, Belyaev I, et al. Review of civil airplane landing gear noise study and its control approaches[J]. Acta Aeronautica et Astronautica Sinica, 2022, 43(8): 137−173(in Chinese). doi: 10.7527/S1000-6893.2022.26996
Leylekian L, Lebrun M, Lempereur P. An overview of aircraft noise reduction technologies[J]. Aerospace Lab, 2014(6): 1−15.
Dobrzynski W. Almost 40 years of airframe noise research: what did we achieve?[J]. Journal of Aircraft, 2010, 47(2): 353−367. doi: 10.2514/1.44457
Monclar P. Landing gear technology programmes[C]//Proc of the AIAA International Air and Space Symposium and Exposition: The Next 100 Years, Dayton, Ohio. AIAA, 2003: AIAA2003−2505. doi: 10.2514/6.2003-2505
Piet J F, Molin N, Sandu C. Aircraft landing gear provided with at least one noise reducing means: US8256702[P]. 2012-09-04.
Manoha E, Bulté J, Caruelle B. Lagoon: an experimental database for the validation of CFD/CAA methods for landing gear noise prediction[C]//Proc of the 14th AIAA/CEAS Aeroacoustics Conference (29th AIAA Aeroacoustics Conference), Vancouver, British Columbia, Canada. Reston, Virginia: AIAA, 2008: 2816. doi: 10.2514/6.2008-2816
Manoha E, Bulte J, Ciobaca V, et al. LAGOON: further analysis of aerodynamic experiments and early aeroacoustics results[C]//Proc of the 15th AIAA/CEAS Aeroacoustics Conference (30th AIAA Aeroacoustics Conference), Miami, Florida. Reston, Virginia: AIAA, 2009: 3277. doi: 10.2514/6.2009-3277
Sengissen A, Giret J C, Coreixas C, et al. Simulations of LAGOON landing-gear noise using Lattice Boltzmann Solver[C]//Proc of the 21st AIAA/CEAS Aeroacoustics Conference, Dallas, TX. Reston, Virginia: AIAA, 2015: 2993. doi: 10.2514/6.2015-2993
Manoha E, Caruelle B. Summary of the LAGOON solutions from the benchmark problems for airframe noise computations-III workshop[C]//Proc of the 21st AIAA/CEAS Aeroacoustics Conference, Dallas, TX. Reston, Virginia: AIAA, 2015: 2846. doi: 10.2514/6.2015-2846
Casalino D, Ribeiro A F P, Fares E, et al. Lattice–Boltzmann aeroacoustic analysis of the LAGOON landing-gear configuration[J]. AIAA Journal, 2014, 52(6): 1232−1248. doi: 10.2514/1.J052365
Casalino D, Ribeiro A F P, Fares E. Facing rim cavities fluctuation modes[J]. Journal of Sound and Vibration, 2014, 333(13): 2812−2830. doi: 10.1016/j.jsv.2014.01.028
Wong M L, Kenway G K, Ghate A S, et al. Predictions of LAGOON nose landing gear flow and noise using wall-modeled large eddy simulations[C]//Proc of the 28th AIAA/CEAS Aeroacoustics 2022 Conference, Southampton, UK. Reston, Virginia: AIAA, 2022: 2850. doi: 10.2514/6.2022-2850
Long Shuangli, Nie Hong, Xue Caijun, et al. Simulation and experiment on aeroacoustic noise characteristics of aircraft landing gear[J]. Acta Aeronautica et Astronautica Sinica, 2012, 33(6): 1002−1013(in Chinese).
Guo Z F, Liu P Q, Guo H. Numerical study on coupling effect of landing gear and cavity noise[C]//Proc of the 25th AIAA/CEAS Aeroacoustics Conference, Delft, The Netherlands. Reston, Virginia: AIAA, 2019: 2507. doi: 10.2514/6.2019-2507
Sanders L, Manoha E, Ben Khelil S, et al. LAGOON: CFD/CAA coupling for landing gear noise and comparison with experimental database[C]//Proc of the 17th AIAA/CEAS Aeroacoustics Conference (32nd AIAA Aeroacoustics Conference), Portland, Oregon. Reston, Virginia: AIAA, 2011: 2822. doi: 10.2514/6.2011-2822
Wang Xiaoyuan, Guo Hao, Xing Yu, et al. Mechanism test on aero acoustic characteristics of LAGOON landing gear wheel cavities[J]. Acta Aeronautica et Astronautica Sinica, 2017, 38(5): 120549(in Chinese). doi: 10.7527/S1000-6893.2016.0302
Frisch U, Hasslacher B, Pomeau Y. Lattice-gas automata for the navier-stokes equation[J]. Physical Review Letters, 1986, 56(14): 1505−1508. doi: 10.1103/physrevlett.56.1505
Chen S, Chen H, Martnez D, et al. Lattice Boltzmann model for simulation of magnetohydrodynamics[J]. Physical Review Letters, 1991, 67(27): 3776−3779. doi: 10.1103/PhysRevLett.67.3776
He X Y, Luo L S. A priori derivation of the lattice Boltzmann equation[J]. Physical Review E, 1997, 55(6): R6333−R6336. doi: 10.1103/physreve.55.r6333
Ffowcs Williams J E, Hawkings D L. Sound generation by turbulence and surfaces in arbitrary motion[J]. Philosophical Transactions of the Royal Society of London Series A, Mathematical and Physical Sciences, 1969, 264(1151): 321−342. doi: 10.1098/rsta.1969.0031
Farassat F. Derivation of formulations 1 and 1A of farassat: NASA TM-2007-214853[R]. NASA, 2007.
Najafi-Yazdi A, Brès G A, Mongeau L. An acoustic analogy formulation for moving sources in uniformly moving media[J]. Proceedings: Mathematical, Physical and Engineering Sciences, 2011, 467(2125): 144−165. doi: 10.1098/rspa.2010.0172
Ricciardi T R, Wolf W R, Speth R. Acoustic prediction of LAGOON landing gear: cavity noise and coherent structures[J]. AIAA Journal, 2018, 56(11): 4379−4399. doi: 10.2514/1.J056957