XIA Xuefeng, GAO Feng, ZHANG Qian, et al. Investigation on the vector performance of a bypass dual throat nozzle with injection at the divergent section[J]. 2021, 39(4): 51-58.
XIA Xuefeng, GAO Feng, ZHANG Qian, et al. Investigation on the vector performance of a bypass dual throat nozzle with injection at the divergent section[J]. 2021, 39(4): 51-58.DOI: 10.7638/kqdlxxb-2020.0070.
Investigation on the vector performance of a bypass dual throat nozzle with injection at the divergent section
The bypass dual throat nozzle (BDTN) is a new type of dual-throat fluidic thrust-vectoring nozzle
which introduces secondary flows by a bypass set between the upstream minimum area and the upstream convergent section. The BDTN can achieve a good thrust vectoring performance without setting complex secondary-flow channels in the engine. Numerical studies were performed to analyze the thrust-vectoring performances of a BDTN with injections at the divergent section under different injection locations and secondary pressure ratios. The main results show that the BDTN with injection at the divergent section can improve the thrust-vectoring performances. With the injection location moving backward
the thrust vector angle increases first and then decreases
while the thrust ratio increases slowly. The secondary pressure ratio rise makes the thrust vector angle and efficiency increase to constant values. But it can lead to a thrust loss when it is larger than a certain value. For the optimal case of the modified BDTN
the thrust vector angle and thrust ratio respectively reach 27.59 degree and 0.956
yielding a vector efficiency of 3°/1% per rate of secondary flow
which indicates that the modified nozzle can achieve a fine thrust vectoring performance.
关键词
Keywords
references
ZHAO X L, GU Y L. Thrust-vectoring technology and its flying testing[J]. Flying Testing, 1996, 6: 2-7. (in Chinese)
CONG R F, WU J Q, ZHANG C F, et al. Numerical research on jet tab thrust vector nozzle aerodynamic characteristic[J]. Acta Aerodynamica Sinica, 2019, 37(2): 234-241. (in Chinese)
ZHOU H C. Computational study of a vector-enhanced dual-throat thrust-vectoring nozzle and experimental validation[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2009. (in Chinese)
LI K X, ERIQITAI, HAN J. Studies on control method of two dimensional fluidic throat skewing vectoring nozzle[J]. Journal of Propulsion Technology, 2012, 33(6): 946-950. (in Chinese) DOI: 10.13675/j.cnki.tjjs.2012.06.009.
FAN Z P, XU J L, GUO S. Effects of secondary injection pipe on dual throat nozzle thrust-vectoring performances[J]. Journal of Propulsion Technology, 2014, 35(9): 1174-1180. (in Chinese) DOI: 10.13675/j.cnki.tjjs.2014.09.004.
GU R, XU J. Effects of cavity on the performance of dual throat nozzle during the thrust-vectoring starting transient process[J]. J Eng Gas Turbine Power, 2014, 136(1): 145021-145026. DOI: 10.1115/1.4025243.
LI Y H, LI J Q, YANG D G, et al. Numerical study of a dual-throat fluidic thrust-vectoring nozzle[J]. Acta Aerodynamica Sinica, 2015, 33(2): 211-217. (in Chinese)
XIA X F, GAO F, HUANG G B, et al. Research progress of the dual-throat thrust-vectoring nozzle[J]. Advances in Aeronautical Science and Engineering, 2017, 8(3): 249-255, 298. (in Chinese) DOI: 10.16615/j.cnki.1674-8190.2017.03.001.
DEERE K. Summary of fluidic thrust vectoring research at NASA Langley Research Center[C ] //21st AIAA Applied Aerodynamics Conference, Orlando, Florida. Reston, Virginia: AIAA, 2003. doi: 10.2514/6.2003-3800
FLAMM J, DEERE K, MASON M, et al. Experimental study of an axisymmetric dual throat fluidic thrust vectoring nozzle for supersonic aircraft application[C ] //43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference Exhibit, Cincinnati, OH. Reston, Virginia: AIAA, 2007. doi: 10.2514/6.2007-5084
SHIN C S, KIM H D, SETOGUCHI T, et al. A computational study of thrust vectoring control using dual throat nozzle[J]. Journal of Thermal Science, 2010, 19(6): 486-490. DOI: 10.1007/s11630-010-0413-x.
FAN Z P, XU J L, WANG Y S. Effects of downstream throat on aerodynamic performance of dual throat nozzle[J]. Journal of Aerospace Power, 2015, 30(3): 580-587. (in Chinese) DOI: 10.13224/j.cnki.jasp.2015.03.008.
ZHOU H C, TAN H J, SUN S, et al. Numerical investigation of a vector-enhanced dual-throat thrust-vectoring nozzle[J]. Journal of Aerospace Power, 2010, 25(9): 2070-2076. (in Chinese) DOI: 10.13224/j.cnki.jasp.2010.09.026.
HE J Y, CHEN Q, DONG J G, et al. Numerical investigation of aerodynamic performance on dual throat thrust vectoring nozzle[J]. Journal of Nanjing University of Aeronautics Astronautics, 2017, 49(S1): 16-23. (in Chinese)
GU R. Research on the key technology of new dual throat fluidic vectoring thrust nozzle[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2013(in Chinese).
LI M, XU J L, HUANG S Z, et al. Bypass type double-throat passive vectoring sprayer nozzle: CN102434315A[P]. 2012-05-02. (in Chinese)
GU R, XU J L, GUO S. Experimental and numerical investigations of a bypass dual throat nozzle[J]. Journal of Engineering for Gas Turbines and Power, 2014, 136(8): 084501-1. DOI: 10.1115/1.4026943.
GU R, XU J L. Dynamic experimental investigations of a bypass dual throat nozzle[J]. Journal of Engineering for Gas Turbines and Power, 2015, 137(8): 72-79. DOI: 10.1115/1.4029391.
LIN Y C, XU J L, HAN J X, et al. Flight test of a fluidic thrust vectoring flying wing without rudder[J]. Journal of Aerospace Power, 2019, 34(3): 701-707. (in Chinese) DOI: 10.13224/j.cnki.jasp.2019.03.023.
WAITHE K, DEERE K. An experimental and computational investigation of multiple injection ports in a convergent-divergent nozzle for fluidic thrust vectoring[C ] //21st AIAA Applied Aerodynamics Conference, Orlando, Florida. Reston, Virginia: AIAA, 2003. doi: 10.2514/6.2003-3802