
1. 株洲中车时代电气股份有限公司,湖南,株洲,412001
2. 智能配用电装备与系统全国重点实验室(河北工业大学),天津,300401
Online First:13 January 2026,
Published:2025
移动端阅览
孙鑫博, 邹白苏, 王明, 陈日升, 冯梦佳. 金属化薄膜电容器失效研究现状[J]. 湖南电力, 2025, 45(6): 91-96.
孙鑫博, 邹白苏, 王明, et al. Research Status of Metallized Film Capacitor Failures[J]. 2025, 45(6): 91-96.
孙鑫博, 邹白苏, 王明, 陈日升, 冯梦佳. 金属化薄膜电容器失效研究现状[J]. 湖南电力, 2025, 45(6): 91-96. DOI: 10.3969/j.issn.1008-0198.2025.06.012.
孙鑫博, 邹白苏, 王明, et al. Research Status of Metallized Film Capacitor Failures[J]. 2025, 45(6): 91-96. DOI: 10.3969/j.issn.1008-0198.2025.06.012.
随着应用场景的扩展和工作环境的严苛化
金属化薄膜电容器的失效问题日益凸显
成为制约电力系统可靠性的瓶颈。从薄膜材料失效与金属化薄膜电容器器件失效两个维度出发
系统分析金属化薄膜电容器的失效机理
重点阐述薄膜微观失效与器件宏观失效之间的内在联系与本质区别
并总结电、热及机械等应力场作用下金属化薄膜电容器性能演变规律
最后提出失效防护策略与技术改进
为金属化薄膜电容器可靠性设计和寿命预测提供理论支撑。
With the expansion of application scenarios and the intensification of working environments
the failure issues of metallized film capacitors have become increasingly prominent
emerging as a critical constraint on the reliability of power systems. Starting from the two dimensions of film material failure and metallized film capacitor device failure
this paper systematically analyzes the failure mechanisms of metallized film capacitors
with a focus on elaborating the intrinsic connections and fundamental differences between microscopic film failure and macroscopic device failure
and summarizes the evolution patterns of metallized film capacitor performance under multi-field effects including electric field
temperature
and mechanical stress. Finally
failure protection strategies and technical improvements are proposed to provide a theoretical foundation for the reliability design and lifetime prediction of metallized film capacitors.
田睿,刘维可,伍珣,等. 基于预充电模型的直流支撑电容器状态辨识方法研究[J]. 湖南电力,2023,43(4):133-138.
王晨轩,王嘉毅,曹狄,等. 海上风电交流并网系统谐波电流放大仿真评估与预测[J]. 电工电气,2025(7):37-42.
杜伯学,冉昭玉,刘浩梁,等. 干式直流电容器聚丙烯薄膜绝缘性能及其改进方法研究进展[J]. 电工技术学报,2023,38(5):1363-1374.
徐哲,程璐,刘宏博,等. 超高直流电场作用下金属化膜电容器的老化特性[J]. 绝缘材料,2023,56(5):55-62.
张午宇,齐磊,张翔宇,等. 计及金属化薄膜电容器与IGBT模块退化过程相关性的柔直换流阀组件可靠性评估方法[J]. 电工技术学报,2024,39(14):4508-4518.
BELKO V,GLIVENKO D,EMELYANOV O,et al.Current pulse polarity effect on metallized film capacitors failure[J]. IEEE Transactions on Plasma Science,2017,45(6):1020-1025.
程璐,李志元,王镜然,等. 高压直流电场与谐波耦合作用下金属化膜电容器失效研究[J]. 中国电机工程学报,2023,43(22):8955-8965.
王昕劼,黄磊,王健涛,等. 电容器用超净聚丙烯薄膜综合性能比较[J]. 电力电容器与无功补偿,2024,45(1):49-55.
李志元,王镜然,徐哲,等. 直流电压作用下金属化膜电容器的自愈特性及寿命预测[J]. 高电压技术,2023,49(7):2929-2937.
LIU H L,DU B X,XIAO M.Improved energy density and charge discharge efficiency of polypropylene capacitor film based on surface grafting[J]. IEEE Transactions on Dielectrics and Electrical Insulation,2021,28(5):1539-1546.
BELKO V O,EMELYANOV O A,IVANOV I O,et al.Self-healing processes of metallized film capacitors in overload modes:part 1:experimental observations[J]. IEEE Transactions on Plasma Science,2021,49(5):1580-1587.
李臻,孙白,何东平,等. 10 kV干式自愈电容器故障分析及改进措施[J]. 高电压技术,2005,31(12):82-83.
刘文凤,刘标,程璐,等. 高储能聚合物电介质材料研究进展[J]. 高电压技术,2023,49(3):1046-1054.
WU Y H,ZHA J W,LI W K,et al.A remarkable suppression on space charge in isotatic polypropylene by inducing the β-crystal formation[J]. Applied Physics Letters,2015, 107(11):112901.
YU C T,XIE Q,BAO Y Z,et al.Crystalline and spherulitic morphology of polymers crystallized in confined systems[J]. Crystals,2017,7(5):147.
张波,易承乾,药育帆,等. 柔直用金属化薄膜电容器多场耦合特性及影响研究综述[J]. 高电压技术,2025,51(5):2219-2233.
MAKDESSI M,SARI A,VENET P.Metallized polymer film capacitors ageing law based on capacitance degradation[J]. Microelectronics Reliability,2014,54(9/10):1823-1827.
李化,章妙,林福昌,等. 金属化膜电容器自愈理论及规律研究[J]. 电工技术学报,2012,27(9):218-223,230.
何渝霜. 金属化薄膜电容器自愈/热劣化机理及状态监测研究[D]. 重庆:重庆大学,2023.
王凯平. 金属化薄膜电容器气隙电离现象的讨论[J]. 电子元件与材料,2018,37(10):86-91.
LI H,LI Z,LIN F C,et al.Capacitance loss mechanism and prediction based on electrochemical corrosion in metallized film capacitors[J]. IEEE Transactions on Dielectrics and Electrical Insulation,2021,28(2):654-662.
王祥. 金属化膜电容器的恒定湿热试验[J]. 电力电容器与无功补偿,2024,45(1):157-163.
司马文霞,华杰方,孙魄韬,等. 冲击电压作用下冲击电容器用聚丙烯薄膜累积失效特性[J]. 高电压技术,2018,44(2):358-365.
王开正,孔德照,何渝霜,等. 自愈式金属化膜电容器微结构演变分析及仿真[J]. 高电压技术,2024,50(10):4581-4590.
胡国胜,钱玲,张国红. 支持向量机的多分类算法[J]. 系统工程与电子技术,2006,28(1):127-132.
赵建印,刘芳,孙权,等. 基于竞争失效模型的金属化膜脉冲电容器产品可靠性研究[J]. 系统工程理论与实践,2006,26(1):60-64.
LI Z,LI H,QIU T,et al.Reliability criterion of film capacitor based on moisture diffusion in encapsulation[J]. High Voltage,2023,8(6):1242-1252.
刘宏博,程璐,徐哲,等. 热老化对电容器用聚丙烯薄膜结构及电学性能的影响[J]. 绝缘材料,2023,56(2):96-103.
尹婷,严飞,王子建,等. 高压自愈式电容器典型交流工况下温度场分析及优化设计[J]. 高电压技术,2016,42(12):3996-4004.
代新,林福昌,李劲,等. 高场强下金属化膜脉冲电容器失效的原因[J]. 高电压技术,2000,26(5):27-29.
孙晓武. 直流支撑电容器温升影响因素研究[J]. 电气技术,2020,21(4):76-79.
师亚萍,张立平,王义猛. 基于Matlab的电容性本质安全电路电弧放电仿真分析[J]. 煤矿机电,2021,42(3):26-29.
郑媚媚. 金属化膜电容器失效物理建模及柔直换流阀组件可靠性评估[D]. 重庆:重庆大学,2019.
吴锴,徐子航,张琛,等. 基于电介质薄膜的器件自愈性能的研究现状[J]. 高电压技术,2024,50(6):2283-2296.
储松潮,黄云锴,潘焱尧,等. 柔性直流输电用电力电子电容器的测试与工程应用[J]. 电力电容器与无功补偿,2019,40(1):59-64.
章妙. 金属化膜电容器自愈特性研究[D]. 武汉:华中科技大学,2012.
李征,李化,林福昌,等. 高温高湿条件下薄膜电容器的寿命预测[J]. 电力电容器与无功补偿,2020,41(4):42-46.
刘鑫雨. 温湿度对电连接器用聚氨酯胶绝缘性能影响规律的研究[D]. 杭州:浙江理工大学,2023.
李艳红,陈宏书,郑建龙,等. 高分子材料疲劳行为的研究[J]. 化学推进剂与高分子材料,2008,6(2):54-57.
江云超. 聚酯型聚氨酯橡胶水解机理及性能研究[D]. 北京:中国石油大学(北京),2021.
张天栋,马海鑫,刘刚,等. 金属化薄膜电容器介电薄膜材料的研究现状[J]. 绝缘材料,2024,57(11):18-33.
肖萌,陈毓妍,赵亦烁,等. 高压直流金属化薄膜电容器绝缘性能提升方法研究进展[J]. 高电压技术,2024,50(6):2319-2331.
穆海宝,高唯,喻琳,等. 介质阻挡电晕放电用于聚丙烯薄膜的表面改性[J]. 高电压技术,2014,40(7):2217-2223.
党智敏. 干式直流电容器全链条国产化关键技术探讨[J]. 电力电容器与无功补偿,2024,45(1):1-14.
钱立文. 方阻渐变内部并联式金属化安全膜:201810346501.3[P].2018-09-21.
李浩原,尹婷,严飞,等. 金属化膜电容器极板发热计算[J]. 电力电容器与无功补偿,2015,36(5):37-40.
广东省塑镕科技有限公司. 金属化聚丙烯膜交流电容器的生产工艺:202110696119.7[P].2021-08-24.
0
Views
4
下载量
0
CSCD
Publicity Resources
Related Articles
Related Author
Related Institution
京公网安备11010802024621