YAN Youyang, CHEN Donglin, YANG Zhan, et al. Numerical Simulation Study on Characteristics and Prevention Methods of Ash Deposition in Thermal Power Units Flue[J]. 2025, 45(2): 63-68.
YAN Youyang, CHEN Donglin, YANG Zhan, et al. Numerical Simulation Study on Characteristics and Prevention Methods of Ash Deposition in Thermal Power Units Flue[J]. 2025, 45(2): 63-68. DOI: 10.3969/j.issn.1008-0198.2025.02.008.
Numerical Simulation Study on Characteristics and Prevention Methods of Ash Deposition in Thermal Power Units Flue
In order to solve the problem of ash deposition in the flue caused by deep peak loading regulation of thermal power units
based on the numerical simulation method of Fluent
the characteristics of fly ash deposition and particle distribution in the flue under different load conditions of thermal power units are studied by constructing a geometric model of the flue structure and a mathematical model of its internal flow. A method to prevent ash deposition in the flue is put forward based on the practical experience of engineering
which is to install a baffle and a high-speed jet nozzle in the flue. The simulation results show that fly ash begins to deposit in the flue when the load of the unit is lower than 80%
and a large number of fly ash deposits in the flue when the load is lower than 40%. The pattern of fly ash particle deposition in different flue structures is as follows: T-shaped flueright-angle elbowhorizontal fluegradual flue. And more than 90% of the deposited fly ash particles are larger than 34 μm in diameter. Compared with the existing flue
the flue equipped with the baffle or jet nozzle can reduce the fly ash deposition by 29.16%~58.62% when the unit is operating at 40% of the rated load.
关键词
Keywords
references
LIU S,SHEN J.Modeling of large-scale thermal power plants for performance prediction in deep peak shaving[J]. Energies,2022,15(9):3171.
FU S,CAO G,OU G F,et al.Numerical study of fly ash deposition process in low temperature economizer under SCR conditions[J]. Korean Journal of Chemical Engineering,2022,39(7):1717-1728.
ZHU M X,LU H,ZHAO W J,et al.A numerical study of ash deposition characteristics in a 660MW supercritical tangential boiler[J]. Advanced Theory and Simulations,2023,6(11):2300133.
欧阳朔. 电站锅炉尾部烟道流场数值模拟分析及优化[D]. 北京:华北电力大学, 2021.
王福军. 计算流体动力学分析:CFD软件原理与应用[M]. 北京:清华大学出版社,2004.
MIRANDA E P,SEMPÉRTEGUI-TAPIA D F,CHÁVEZ C A. Turbulence models performance to predict fluid mechanics and heat transfer characteristics of fluids flow in micro-scale channels[J]. Numerical Heat Transfer,Part A:Applications,2024:1-20.
MA X Y,WANG D X,LIU B,et al.Numerical simulations and validation of gas-solid flows in a fluidized-bed roaster based on the CFD-DPM model[J]. The Canadian Journal of Chemical Engineering,2023,101(11):6577-6590.
STONE L,HASTIE D,ZIGAN S.Using a coupled CFD-DPM approach to predict particle settling in a horizontal air stream[J]. Advanced Powder Technology,2019,30(4):869-878.