
1. 湘潭大学机械工程学院,湖南,湘潭,411105
2. 长沙天一智能科技股份有限公司,湖南,长沙,412000
3. 湖南省湘电锅炉压力容器检验中心有限公司,湖南,长沙,410007
4. 湖南建筑高级技工学校,湖南,长沙,410015
Published:2022
移动端阅览
程葳蕤, 唐方, 杨成明, 李湘文, 沈亚仁. 纵向磁控钨极惰性气体保护焊电弧运动轨迹行为研究[J]. 湖南电力, 2022, 42(5): 42-47.
CHENG Weirui, TANG Fang, YANG Chengming, et al. Research on Longitudinal Magnetron Tungsten Inert Gas Welding Arc Trajectory Behavior[J]. 2022, 42(5): 42-47.
程葳蕤, 唐方, 杨成明, 李湘文, 沈亚仁. 纵向磁控钨极惰性气体保护焊电弧运动轨迹行为研究[J]. 湖南电力, 2022, 42(5): 42-47. DOI: 10.3969/j.issn.1008-0198.2022.05.007.
CHENG Weirui, TANG Fang, YANG Chengming, et al. Research on Longitudinal Magnetron Tungsten Inert Gas Welding Arc Trajectory Behavior[J]. 2022, 42(5): 42-47. DOI: 10.3969/j.issn.1008-0198.2022.05.007.
钨极惰性气体保护焊(TIG)技术是近年来广泛应用的焊接方法
其电弧稳定、焊接质量好、飞溅小
应用领域广泛。通过改变磁场频率、磁感应强度和焊接电流
研究TIG电弧行为。结果表明
无外加磁场的TIG电弧呈圆锥形
施加纵向磁场时
TIG电弧的上部收缩、底部轴向膨胀
呈钟罩形;施加交流纵向磁场时
TIG电弧轮廓明显变小
电弧尾端有明显的汇聚。
Tungsten inert gas arc welding(TIG)technology is widely used in recent years
due to its arc stability
good welding quality
small spatter
widely used fields. TIG welding arc behavior is studied by varying magnetic field frequency
magnetic induction and welding current in the paper. The results show that the TIG arc without external magnetic field is conical
the upper part of TIG arc shrinks and the bottom part of TIG arc expands axially when applied longitudinal magnetic field. The arc profile becomes smaller obviously when applied AC longitudinal magnetic field
and there is obvious convergence at the end of arc.
孙雅杰,常云龙. 磁控电弧焊接过程及新技术研究进展[J]. 材料导报,2020,34(21):21155-21165.
黄武东,华学明,季相儒,等. 外加纵向磁场对5083铝合金P-GMAW过程的影响[J]. 电焊机,2019,49(2):80-85.
Wu Hong, Chang Yunlong, Lu Lin, et al. Review on magnetically controlled arc welding process[J]. The International Journal of Advanced Manufacturing Technology,2017,91(9/12):4263-4273.
肖磊,樊丁,黄健康,等. 外加高频纵向磁场作用下的TIG焊电弧数值模拟[J]. 焊接学报,2017,38(2):66-70.
寇婵. 纵向磁场频率对TIG焊电弧特性的影响[D].沈阳:沈阳工业大学,2015.
刘政军,陆璐,苏允海,等. 纵向磁场对TIG焊电弧形态的影响[J]. 沈阳工业大学学报,2015,37(1):34-38.
张新,王振民,李远茂,等. 纵向磁场在磁控电弧技术中的应用研究[J]. 电焊机,2013,43(12):38-42.
高亚楠. 纵向磁场作用下高速TIG焊接电弧行为及焊缝成形机理研究[D].沈阳:沈阳工业大学,2012.
朱胜,王启伟,殷凤良,等. 交变纵向磁场作用下MIG焊电弧行为研究[J]. 材料热处理学报,2011,32(11):23-27.
车小平. 纵向磁场作用下铝合金MIG焊接实验研究及数值模拟[D].沈阳:沈阳工业大学,2007.
李海刚,殷咸青,罗键,等. 用电磁搅拌提高LD10CS铝合金焊接接头的质量[J]. 焊接学报, 1998(S1): 104-109.
贾昌申,殷咸青.纵向磁场中的焊接电弧行为[J]. 西安交通大学学报,1994,28(4): 7-13.
吴丰顺,王士元,史耀武,等. 纵向磁场作用下电弧的运动机制[J]. 武汉汽车工业大学学报, 1997(1): 45-48.
M.C. Tsai, Sindo Kou. Heat transfer and fluid flow in welding arcs produced by sharpened and flat electrodes[J]. Pergamon, 1990, 33(10):2089-2098.
罗键,贾昌申,王雅生,等. 外加纵向磁场GTAW焊接机理——Ⅰ.电弧特性[J]. 金属学报, 2001(2): 212-216.
罗键,贾昌申,王雅生,等. 外加纵向磁场GTAW焊接机理——Ⅱ.电弧模型[J]. 金属学报, 2001(2): 217-220.
华爱兵,陈树君,张晓亮,等. 纵向磁场作用下MAG焊电弧的动力学分析[J]. 焊接学报, 2008(6): 53-56,115-116.
牛锐锋,王亚妮,林冰华,等. 纵向磁场对焊接过程的影响[J]. 热加工工艺, 2009, 38(1): 131-133.
E.F.Prozorov,K.N. Ul’yanov,V.A. Fedorov, et al. Study of the direct current breakage process in an external nonuniform magnetic field[J]. High Temperature, 2011, 49(5):629-636.
王城,查俊,李皖皖,等. 磁旋转电弧中热阴极弧根形态的实验研究[J]. 高电压技术, 2014, 40(10): 3025-3031.
Varghese V M J, Suresh M R, Kumar D Siva. Recent developments in modeling of heat transfer during TIG welding-a review[J].International Journal of Advanced Manufacturing Technology, 2013, 64(5-8):749-754.
Urusov R. M., Urusova I. R. Mechanisms of the Formation of an Electric Arc of a Helical Shape in an External Axial Magnetic Field[J]. High Temperature, 2019, 57(3):298-307.
Luo Jian, Yao Zongxiang, Xue Keliang. Anti-gravity gradient unique arc behavior in the longitudinal electric magnetic field hybrid tungsten inert gas arc welding[J]. The International Journal of Advanced Manufacturing Technology, 2016, 84(1/4):647-661.
0
Views
230
下载量
0
CSCD
Publicity Resources
Related Articles
Related Author
Related Institution
京公网安备11010802024621