
湖南大学电气与信息工程学院,湖南,长沙,410082
Published:2022
移动端阅览
荣飞, 孙克强. 基于最近电平逼近调制的IGBT开路故障诊断方法[J]. 湖南电力, 2022, 42(4): 7-12.
RONG Fei, SUN Keqiang. IGBT Open Circuit Fault Diagnosis Method Based on Nearest Level Approximation Modulation[J]. 2022, 42(4): 7-12.
荣飞, 孙克强. 基于最近电平逼近调制的IGBT开路故障诊断方法[J]. 湖南电力, 2022, 42(4): 7-12. DOI: 10.3969/j.issn.1008-0198.2022.04.002.
RONG Fei, SUN Keqiang. IGBT Open Circuit Fault Diagnosis Method Based on Nearest Level Approximation Modulation[J]. 2022, 42(4): 7-12. DOI: 10.3969/j.issn.1008-0198.2022.04.002.
提出一种基于最近电平逼近调制(NLM)策略的全桥子模块IGBT开路故障诊断定位方法
分析子模块故障特性
根据调制NLM策略对桥臂子模块电容电压采样值的排序
计算其中位数作为子模块电容电压预测值。通过对比预测值与实测值获得诊断判据
该方法无需占用过多计算资源并快速完成故障诊断。同时通过改变故障子模块工作状态实现故障IGBT定位与子模块故障容错控制。最后
在MATLAB/Simulink中搭建仿真模型
仿真结果验证了该子模块IGBT开路故障诊断定位方法与容错控制策略的有效性。
This paper presents an open circuit fault diagnosis and location method for full bridge sub module IGBT based on nearest level approximation modulation (NLM) strategy and analyze.the fault characteristics of sub modules. According to the NLM modulation strategy
the sampling values of the capacitance voltage of the sub module of the bridge arm are sorted
and the median is calculated as the predicted value of the capacitance voltage of the sub module. By comparing the predicted value with the measured value
the diagnosis criterion is obtained. This method does not need to occupy too much computing resources and completes the fault diagnosis quickly. At the same time
the fault IGBT positioning and fault tolerant control of the fault sub module are realized by changing the working state of the fault sub module. Finally
a detailed simulation model is built in matlab/simulink. The simulation results verify the effectiveness of the sub module IGBT open circuit fault diagnosis and location method and fault-tolerant control strategy.
周诗嘉,杨光源,彭光强,等.基于18相风力发电系统的最大功率跟踪控制策略研究[J].湖南电力,2021,41(5):14-21.
Frede Blaabjerg,Marco Liserre, Ke Ma. Power Electronics Converters for Wind Turbine Systems[J]. IEEE Transactions on Industry Applications, 2011, 48(2):708-719.
刘飞,高海祐,刘文君,等.部分能量输入的三端口六边形MMC功率分析及环流控制[J].中国电机工程学报,2019,39(20):6056-6064,6186.
王要强,原博,刘文君,等.九边形MMC单端口断路故障下等效六边形MMC控制[J/OL].高电压技术:1-15(2021-09-22)[2022-06-30].DOI:10.13336/j.1003-6520.hve.20210933.
Lennart Baruschka,Axel Mertens. A new three-phase AC/AC modular multilevel converter with six branches in hexagonal configuration[J]. IEEE Transactions on Industry Applications,2013,49(3): 1400-1410.
荣飞,严家俊,孙文隆,等.基于H-MMC的直驱式永磁同步风力发电系统的运行与控制[J].电力自动化设备,2020,40(1):38-45.
张书诚. MMC子模块开路故障诊断研究[D].昆明:昆明理工大学,2020.
邹毅军,魏明洋.模块化多电平换流器子模块故障模拟方法[J].电气技术,2022,23(4):96-101.
刘方艳. MMC子模块开路故障诊断与容错控制研究[D].贵阳:贵州大学,2021.
姜斌,龚雁峰,李岩.模块化多电平换流器子模块短路故障分析、检测与定位方法[J].南方电网技术,2019,13(3):73-78,88.
毕恺韬,安群涛,孙东阳,等.基于子模组工况分析的模块化多电平储能系统开路故障诊断方法[J].电工技术学报,2018,33(6):1219-1226.
尹桥宣,段斌,沈梦君,等.模块化五电平逆变器子模块开路故障的智能诊断方法[J].电力系统自动化,2018,42(12):127-133,147.
杨桢,马子莹,李鑫.基于WPD-PCA与GA-BP的MMC子模块故障定位方法研究[J].电子测量与仪器学报,2019,33(7):181-187.
谢东,葛兴来.基于残差变化率的单相级联H桥整流器IGBT开路故障诊断[J].电工技术学报,2018,33(16):3822-3834.
徐坤山,谢少军.基于增量预测模型的MMC子模块功率管开路故障检测方法[J].中国电机工程学报,2018,38(21):6420-6429,6504.
刘玉林,齐静静,李家宁,等.一种基于桥臂电流畸变及自适应观测的MMC子模块开路故障诊断定位方法[J].电源学报,2020,18(3):106-115.
殷实,谭国俊.一种基于扩展卡尔曼滤波算法的MMC系统故障诊断策略[J].电工技术学报,2016,31(19):74-84.
罗朋,李一峰,夏正龙,等.利用粒子群优化最小二乘支持向量机诊断H桥功率模块IGBT故障[J].电力电容器与无功补偿,2018,39(2):26-31.
于生宝,何建龙,王睿家,等.基于小波包分析和概率神经网络的电磁法三电平变换器故障诊断方法[J].电工技术学报,2016,31(17):102-112.
彭冠炎.基于MMC技术柔性直流输电系统调制策略选择方法[J].湖南电力,2015,35(6):6-9.
0
Views
183
下载量
0
CSCD
Publicity Resources
Related Articles
Related Author
Related Institution
京公网安备11010802024621