Finite Element Analysis of Drum Brake Stamping-welding Shoes Based on ANSYS Workbench

Liu Kun; Peng Mei-chun; Lin Yi-qing; Wang Hai-long

doi:10.3969/j.issn.1007-7162.2013.01.017

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

Finite Element Analysis of Drum Brake Stamping-welding Shoes Based on ANSYS Workbench

更新时间：2026-05-27

- Finite Element Analysis of Drum Brake Stamping-welding Shoes Based on ANSYS Workbench
- Vol. 30, Issue 1, Pages: 92-96(2013)
- 作者机构：
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.1007-7162.2013.01.017
  CLC：
- Online First：30 March 2013，
  
  Published：2013
- 稿件说明：
移动端阅览
刘昆, 彭美春, 林怡青, 王海龙. 基于ANSYS Workbench鼓式制动器冲焊蹄的有限元分析[J]. 广东工业大学学报, 2013, 30(1): 92-96.

Liu Kun, Peng Mei-chun, Lin Yi-qing, et al. Finite Element Analysis of Drum Brake Stamping-welding Shoes Based on ANSYS Workbench[J]. 2013, 30(1): 92-96.
刘昆, 彭美春, 林怡青, 王海龙. 基于ANSYS Workbench鼓式制动器冲焊蹄的有限元分析[J]. 广东工业大学学报, 2013, 30(1): 92-96. DOI： 10.3969/j.issn.1007-7162.2013.01.017.

Liu Kun, Peng Mei-chun, Lin Yi-qing, et al. Finite Element Analysis of Drum Brake Stamping-welding Shoes Based on ANSYS Workbench[J]. 2013, 30(1): 92-96. DOI： 10.3969/j.issn.1007-7162.2013.01.017.

摘要

基于ANSYS Workbench软件对鼓式制动器冲焊蹄进行有限元分析.得出制动蹄表面承受的正压力与摩擦力沿弧面呈正弦分布的规律，建立了蹄片表面正压力与摩擦力在三维模型中的离散加载方法与边界条件，进而计算得出制动蹄的变形、应力、应变的大小及分布情况，其结果表明蹄面上的变形、应力分布较为均匀，最大变形和最大应力发生在两腹板间距缩小处腹板上，但未超出设计要求范围.

Abstract

The finite-element analysis of the brake stamping-welding shoes was conducted

based on software of ANSYS Workbench. Firstly

the sinusoidal distribution rule of positive pressure and friction force along the cambered surface of the brake shoe was analyzed. Then

the discrete loading method of positive pressure and friction force and the boundary conditions was established in a 3-D model. Finally

the size of deformation

stress

strain and the distribution of brake shoes were calculated. The results indicate that deformation

stress distribution of the brake shoes are even

the maximum deformation and the maximum stress occur in two webs with narrow spacing

but they are not beyond the scope of design requirements.

关键词

Keywords

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

An Analysis of Tire Pumping Noise and Design of Low Noise Structure

Modal Analysis of the Exhaust Manifold Assembly Based on the ABAQUS

Realization of Geometry Constraints in Deformable B-spline Curve Modeling

Multi-Scale Contrastive Embedding Enhanced Adaptive Intrusion Detection Model

Bimodal Iterative Cross-attention Fusion Ensemble Framework

Related Author

Wang Guo-lin

Shen Fei

Zhou Hai-chao

Yang Jian

Chen Dong-xing

Xiong Rui

Wu Jian

Xiong Jia-qin

Related Institution

No data

AI问答

⁰