赵睿杰,赵有龙,周游,张德胜.90°弯管固液两相流粗颗粒磨损特性的数值模拟[J].华中科技大学学报(自然科学版),2021(10).

田长安,袁帅,王俊雄,刘小兵.多泥沙河流水电站水轮机转轮内部流动数值模拟[J].水电能源科学,2020(09).

曾崇济,肖业祥,张瑾,安守皇,王正伟.冲击式水轮机喷射机构的磨损特性数值分析[J].排灌机械工程学报,2015(05).

董刚,张九渊.固体粒子冲蚀磨损研究进展[J].材料科学与工程学报,2003(02).

Tarodiya Rahul,Levy Avi.Erosion coupled dynamic mesh analysis for location of maximum erosion in 90-degree bends for gas-solid flows[J].Advanced Powder Technology,2023.

Wang Qiuchen,Huang Qiyu,Wang Nianrong,Wen Yunhao,Ba Xili,Sun Xu,Zhang Jun,Karimi Soroor,Shirazi Siamack A..An experimental and numerical study of slurry erosion behavior in a horizontal elbow and elbows in series[J].Engineering Failure Analysis,2021.

Bilal Faris S.,Sedrez Thiana A.,Shirazi Siamack A..Experimental and CFD investigations of 45 and 90 degrees bends and various elbow curvature radii effects on solid particle erosion[J].Wear,2021.

Carlos Antonio Ribeiro Duarte,Francisco José de Souza.Dynamic mesh approaches for eroded shape predictions[J].Wear,2020.

V.B. Nguyen,Q.B. Nguyen,Z.G. Liu,S. Wan,C.Y.H. Lim,Y.W. Zhang.A combined numerical–experimental study on the effect of surface evolution on the water–sand multiphase flow characteristics and the material erosion behavior[J].Wear,2014.

G. Grant,W. Tabakoff.Erosion Prediction in Turbomachinery Resulting from Environmental Solid Particles[J].Journal of Aircraft,1975.

Mazumder Quamrul H.,Shirazi Siamack A.,McLaury Brenton.Experimental Investigation of the Location of Maximum Erosive Wear Damage in Elbows[J].Journal of Pressure Vessel Technology,2008.

Y.I. Oka,T. Yoshida.Practical estimation of erosion damage caused by solid particle impact Part 2: Mechanical properties of materials directly associated with erosion damage[J].Wear,2005.