管内加电伴热装置熔盐熔化过程数值模拟研究

马瑞; 任志恩; 郭嘉敏; 朱锐; 王峰; 杨晓艳

doi:10.19912/j.0254-0096.tynxb.2025-0216

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

管内加电伴热装置熔盐熔化过程数值模拟研究

更新时间：2026-07-22

- 管内加电伴热装置熔盐熔化过程数值模拟研究
- Vol. 47, Issue 6, Pages: 799-805(2026)
- 作者机构：
- 作者简介：
- 基金信息：
- DOI：10.19912/j.0254-0096.tynxb.2025-0216
  CLC： TK124
- Online First：08 July 2026，
  
  Published：2026
- 稿件说明：
移动端阅览
马瑞, 任志恩, 郭嘉敏, et al. 管内加电伴热装置熔盐熔化过程数值模拟研究[J]. 2026, 47(6): 799-805.
DOI：

马瑞, 任志恩, 郭嘉敏, et al. 管内加电伴热装置熔盐熔化过程数值模拟研究[J]. 2026, 47(6): 799-805. DOI： 10.19912/j.0254-0096.tynxb.2025-0216.

摘要

建立内置电伴热装置水平管道二维模型

模拟混合熔盐纳米流体在熔化过程中固-液交界面的位置、形状和温度场的分布

分析不同斯蒂数（Ste）和电伴热装置的尺寸对整个熔盐熔化过程的影响。结果表明

随着加热时长的增加

电伴热装置与相界面之间的距离增加

温度向固相区熔盐传递随热阻的增大而逐渐变缓。加热时间持续至3082 s时

熔盐纳米流体完全熔化。当Ste由0.392分别增至0.706和1.021时

熔盐纳米流体完全熔化时间分别减少66%和81%;与5 mm直径的电伴热装置相比较

直径为10 mm和20 mm的电伴热装置熔盐熔化效率分别提高68%和82%

熔盐完全熔化的时间分别为1100 s和623 s。

Abstract

In this paper

a two-dimensional model of horizontal pipeline with built-in electric heat tracing device is established to simulate the position

shape and temperature field distribution of solid-liquid interface of mixed molten salt nanofluid during the melting process

and to analyze the influence of different Ste and the size of the electric heat tracing device on the whole molten salt melting process. The results indicate that

as the heating duration increases

the distance between the electric heating system and the phase interface increases

and the transfer of heat to the molten salt in the solid phase gradually slows down due to the increase in thermal resistance. and the molten salt nanofluid is completely melted when the heating time lasts for 3082 s. The temperature of the solid-liquid interface is reduced by the influence of the thermal resistance of the electric trace heating device. When increases from 0.392 to 0.706 and 1.021

the complete melting time of the molten salt nanofluid is reduced by 66% and 81%

respectively; compared with the 5 mm diameter electric trace heating device

the melting efficiency of the molten salt of the electric trace heating device with diameters of 10 mm and 20 mm is increased by 68% and 82%

and the time of complete melting of the molten salt is 1100 s and 623 s

respectively.

关键词

Keywords

references

牛东圣, 周治, 肖斌, 等. 槽式光热电站熔盐管道系统防凝研究进展[J]. 热力发电, 2020, 49(3): 1-7.

LI Z, ZHANG Q Q, WANG Z F, et al.Numerical and experimental study of solidification dangers in a molten salt receiver for cloudy conditions[J]. Solar energy, 2019, 193: 118-131.

CALVET N, SLOCUM A H, GIL A, et al.Dispatchable solar power using molten salt directly irradiated from above[J]. Solar energy, 2021, 220: 217-229.

温士彪, 张瑜, 王永生, 等. 浅谈熔盐防冻堵技术的研究[J]. 区域供热, 2021(5): 1-7.

王佳明, 黄静, 曾柱楷, 等. 电伴热布置方式对管内熔盐解冻过程的影响研究[J]. 节能技术, 2022, 40(1): 36-42, 51.

申晓蕾, 陈海涛. 电伴热在光热发电熔盐系统中的应用浅析[J]. 电力设备管理, 2024(15): 131-133.

吴旺松, 匡敬柱, 毛正江, 等. 管内加装电伴热装置时熔盐熔化过程研究[J]. 热力发电, 2022, 51(3): 79-87.

臧平伟. 太阳能光热电站熔盐管道及其防凝设计[J]. 东方电气评论, 2019, 33(2): 67-70.

陈虎, 吴玉庭, 郭航, 等. 低熔点熔融盐管内强迫对流换热的实验研究[J]. 太阳能学报, 2021, 42(2): 25-30.

XU X, ZHANG L, WANG Q, et al.Thermal performance analysis of molten salt based on a novel experimental rig[J]. Applied thermal engineering, 2024, 236: 121731.

ONG T C, SARVGHAD M, BELL S, et al.Review on the challenges of salt phase change materials for energy storage in concentrated solar power facilities[J]. Applied thermal engineering, 2024, 238: 122034.

ILHAM M, KUNCORO AJI I, OKAWA T.Numerical study on the effects of tube inclination angle and heat conductive cover plate on freeze plug performance in molten salt reactors[J]. Nuclear engineering and design, 2024, 428: 113528.

TIAN W S, PENG T J, TANG Y Z, et al.Numerical analysis of turbulent mixed convection heat transfer of molten salt in an inclined cooling tube[J]. Annals of nuclear energy, 2024, 207: 110676.

孟强, 陈梦东, 胡晓, 等. 管内熔融盐强制对流传热的数值模拟[J]. 储能科学与技术, 2019, 8(3): 544-550.

孔祥夷. 太阳能集热管内熔盐流动传热特性数值模拟[J]. 节能技术, 2017, 35(2): 167-171.

YANG X P, YANG X X, DING J, et al.Numerical simulation study on the heat transfer characteristics of the tube receiver of the solar thermal power tower[J]. Applied energy, 2012, 90(1): 142-147.

谭倩莉, 刘慧芳, 张铭驿, 等. 月桂酸/硬脂酸/纳米复合相变材料制备及性能研究[J]. 太阳能学报, 2024, 45(4): 532-539.

DONG X M, WU Y T, ZHANG C C, et al.Experimental and numerical study on heat transfer and flow characteristics of molten salt nanofluids in spiral-wound tube heat exchanger[J]. International journal of thermal sciences, 2023, 191: 108343.

CHEN X, QU L M, ZHANG M X, et al.Experimental study on thermal properties and microstructure of carbon nanotube molten salt nanofluids for solar thermal utilization[J]. Solar energy materials and solar cells, 2024, 278: 113201.

HE B S, YING Z P.Numerical investigation of molten salt-based nanofluid laminar heat transfer in a circular tube using Eulerian-Lagrangian method[J]. Thermal science, 2021, 25(5 Part A): 3427-3439.

张嘉辉. 三元氯化盐相变蓄热特性及强化换热研究[D]. 哈尔滨: 哈尔滨工业大学, 2018.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

STUDY ON THE HEAT TRANSFER OF PACKED BED FOR PCM THERMAL STORAGE

MOLECULAR DYNAMICS STUDY ON THERMOPHYSICAL PROPERTIES OF Li2CO3/Na2CO3/K2CO3AND THEIR MIXED MOLTEN SALT FOR HEAT STORAGE

面向调峰的光热-光伏联合电站多时间尺度动态优化调度

金字塔型内表面太阳能集热管的传热性能的数值研究

基于阵列斜肋的太阳电池歧管微通道换热性能数值模拟

Related Author

季畅

姜文超

杨薛明

Du Yanxia~1 Jia Daiyong~1 Yuan Yanping~2

贾代勇

袁艳平

Yang Xueming

Tao Jiawei

Related Institution

PLA University of Sci & Tech

Southwest Jiaotong University

Hebei Key Laboratory of Low Carbon and High Efficiency Power Generation Technology, Department of Power Engineering, North China Electric Power University

School of Materials and Energy, Guangdong University of Technology

Guangdong Provincial Key Laboratory of Fuel Cell Technology

AI问答

⁰