the CsPbBr solar cells based on different concentrations of PbBr are prepared by a multi-step spin coating method. The effect of different PbBr concentrations on the photovoltaic performance of CsPbBr solar cells is studied. The results showed that compared with CsPbBr solar cells based on 0.6
0.8 and 1.2 mol/L PbBr
the short-circuit current density of CsPbBr solar cell with 1.0 mol/L PbBr is effectively improved (7.47 mA/cm)
which leads to an improvement in device efficiency (7.30%). Characterization tests revealed that the CsPbBr₃ absorber layer prepared with a PbBr concentration of 1.0 mol/L exhibits better uniformity
lower roughness
higher light absorption
and stronger electron-hole separation capability
leading to improved device efficiency.
关键词
Keywords
references
WANG P Y, ZHANG X W, ZHOU Y Q, et al.Solvent-controlled growth of inorganic perovskite films in dry environment for efficient and stable solar cells[J]. Nature communications, 2018, 9: 2225.
YAN L Y, HUANG H, CUI P, et al.Fabrication of perovskite solar cells in ambient air by blocking perovskite hydration with guanabenz acetate salt[J]. Nature energy, 2023, 8(10): 1158-1167.
ZHANG X S, WANG Q, JIN Z W, et al.Stable ultra-fast broad-bandwidth photodetectors based on α-CsPbI3 perovskite and NaYF4: Yb, Er quantum dots[J]. Nanoscale, 2017, 9(19): 6278-6285.
TAN Y, XIAO B, XU P, et al.Improving the photovoltaic performance of flexible solar cells with semitransparent inorganic perovskite active layers by interface engineering[J]. ACS applied materials & interfaces, 2021, 13(17): 20034-20042.
NOH J H, IM S H, HEO J H, et al.Chemical management for colorful, efficient, and stable inorganic-organic hybrid nanostructured solar cells[J]. Nano letters, 2013, 13(4): 1764-1769.
DU S X, HUANG H, LAN Z N, et al.Inhibiting perovskite decomposition by a creeper-inspired strategy enables efficient and stable perovskite solar cells[J]. Nature communications, 2024, 15: 5223.
WANG X X, HUANG H, WANG M, et al.Oriented molecular bridge constructs homogeneous buried interface for perovskite solar cells with efficiency over 25.3%[J]. Advanced materials, 2024, 36(16): 2310710.
LAN Z N, HUANG H, LU Y, et al.Homogenizing the electron extraction via eliminating low-conductive contacts enables efficient perovskite solar cells with reduced up-scaling losses[J]. Advanced functional materials, 2024, 34(32): 2316591.
ZHANG Q, HUANG H, YANG Y Y, et al.A universal ternary solvent system of surface passivator enables perovskite solar cells with efficiency exceeding 26[J]. Advanced materials, 2024, 36(50): e2410390.
EFFECT OF ANTISOLVENT ON PERFORMANCE OF CsPbBr3SOLAR CELLS
基于有机-无机杂化CH3NH3PbI3钙钛矿太阳电池性能的理论分析
基于染料表面改性的GeSe薄膜光电性能研究
基于太阳能-雨能协同能量收集的太阳电池研究进展
EFFECT OF ZnO FILMS ON THE PERFORMANCEOF CIGS SOLAR CELLS
Related Author
Chen Ying
Li Fuqiang
王传坤
张馨
张星
郝艳玲
张文艺
吴海峰
Related Institution
School of Science, Hubei University of Technology
南开大学信息学院光电子研究所 天津300071
南开大学信息学院光电子研究所
Institute of Photovoltaics, Southwest Petroleum University
Beijing Engineering Research Centre of Sustainable Energy and Buildings, School of Environment and Energy Engineering, Beijing University of Civil Engineering and Architecture